Tender For Certain Work Services At P-212 At Af Stn Dinjan Under Ge (Af) Mohanbari
Tender Value
44 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Work Services At P-212 At Af Stn Dinjan Under Ge (Af) Mohanbari
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for high strength deformed TMT steel bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 5 | M&L high strength deformed TMT steel bars, as in reinforcement, 6mm to 8mm dia as in stirrups, cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 6 | Form work to sides of concrete foundation, footings, base of columns, raft and raft beems, sides and soffits if any of foundation and plinth beems and similar work, verticle or to batter of rough finished surfaces of concrete flat complete all as specified and directed. |
| 7 | Form work to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed. |
| 8 | Formwork to sides & soffits of lintel beams and the like rough finished of concrete flat surfaces complete all as specified and directed. |
| 9 | M&L for RCC M-30 (Design Mix) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 10 | M&L for RCC M-30 Design Mix as in column above GL and the like complete all as specified and directed. |
| 11 | M&L for RCC M-30 (Design mix) as in lintel/ roof beam complete all as specified and directed. |
| 12 | M&L for brick work with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed. |
| 13 | M& L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished rough to receive wall finishes complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint 100% acrylic, any tinted as in (camouflage pattern), over a coat of cement based primer including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, or drops and splashes complete all as specified and directed. |
| 15 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed. |
| 16 | Removing of surplus soil not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete including removing dismantled material from work site complete all as specified and directed. |
| 18 | Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody complete all as specified and directed. |
| 19 | Dismantling posts or struts (wood, steel or RCC) any section embedded in Concrete, brick work, masonry, etc including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 20 | M&L for framed work as in steel gate framed and side hung incl pintle hinges, stops hand made sliding bolt monkey tail bolts etc complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide of surface exceeding 10cm width or girth complete all as specified and directed. |
| 22 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender