Tender For Repairs/Maintainance Of Certain Roads Side Berms Including Road Furniture Of Various Units Under Age B/R-I K Tee.
Tender Value
1 Crore
Estimated cost
Bid Submission
28 Oct 2026
24 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Maintainance Of Certain Roads Side Berms Including Road Furniture Of Various Units Under Age B/R-I K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc complete all as specified and as directed. |
| 2 | M & L for Applying evenly a priming/tack coat with bituminous primer of paving bitumen at 5 kg per 10 square metre with bitumen grade VG-10 on blacktop surface using mechanical sprayer complete all as specified and as directed. |
| 3 | M&L for premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified ans directed. |
| 4 | M&L for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed. |
| 5 | Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions and as specified and directed. |
| 6 | S&F in repair solar road delineator 6 LEDs of colour red/ yellow housed in plastic body, LEDs, solar-cells, battery and light sensor well protected inside, polycarbonate sheet; device protected with powder coated wire mesh, cage. System mounted over 47 mm dia steel tube powder coated of length 600 mm having sheet foot for firm grip to ground. Delineator to have additional reflective bands. System workable for 2-3 days (nights) after full charge for 8-10 hours. CAT PART No. GPL-13-01 of GREENLITE PVT LTD Note: Delineators with extra height can also be made e.g. of height 750, 900 OR 1000mm. |
| 7 | S&F in repair solar road stud having 3 LEDs of colours unbreakable Poly carbonate shell & clear facings designed for maintenance free operation, 100% water proof design confirms to IP67, Dimension: 125 X 125 x 25mm with Dual Shank of 65 mm. High Efficiency mono-crystalline Solar panel 3 V / 120 mA., One Ni-Mh LSD rechargeable battery (1.2V/800 mA) high temperature, Six Super bright LEDs with 14,000 mcd, View distance: Up to 1000m, Flash rate: 2Hz or according to customers requirements, Bearable weight: 20 Tons, Color: Red, Amber, Blue, Green and White, Working time: 36 to 40 hours successively after the battery is fully charged, The electronic circuit is encapsulated with the battery in the body of the Solar Stud, A non-invasive switch (optional) to avoid battery drainage during storage and transportation, Charging time: five to six hours/day, Working temperature: - 40° ~ 75°C, Lifetime: Three to five years, Easy installation, no maintenance, Brightness sensitive auto-switch automatically turns on at night and turns off at dawn, High visibility LED's help ensure easy and safe night driving, Ideal for highways, parking lots, roads and similar isolated or stand-alone traffic applications complete as per MORTH/IRC specifications and manufacture's instruction, complete all as specified and directed. |
| 8 | S&F in repair aluminium road studs two way reflective, dimensions 110 x 128 x 30 mm, aluminium Alloy body, Reflective Panel- Amber, Red or White Weight : 530 complete aluminium coated of approved quality, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 9 | S&F in repair aluminium road studs two way reflective, dimensions 110 x 128 x 30 mm, aluminium Alloy body, Reflective Panel- Amber, Red or White Weight : 530 complete aluminium coated of approved quality, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender