Tender For Construction Of Mini Community Sanitary Complex Toilet At Near Pues In Pinnavasal Panchayat.
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
12 days left
EMD
5920
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mini Community Sanitary Complex Toilet At Near Pues In Pinnavasal Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Mini CSC Toilet at Near PUES in Pinnavasal Panchayat. |
| 2 | Earthwork excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation |
| 3 | Supplying and filling in foundations and basement with filling sand in layers not more than 15cm. Thick well ramed, watered and compacted complete |
| 4 | Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. |
| 5 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"41/4\\"x21/4\\" including cost and conveyance of all materials to site and all labour charges etc complete |
| 7 | Blow basement |
| 8 | Above basement |
| 9 | Supplying & Erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90x60cm&10gauge stiffened, welded with steel angle of size 25x25x3 mm for boarding laid over silver oak joists of size 10x6.5cm spaced @ about 90cm and supported by casurina props of 10-13cm dia sapced @75cm etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2 for the following items. |
| 10 | Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. |
| 11 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 12 | Plastering with cm 1:3 mix( one cement and Three sand ) to 10 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 13 | Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 14 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 15 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 16 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 17 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 18 | Supplying and fixing of steel doors, ventilators and windows including cost of steel plates, angles , labour charges etc complete |
| 19 | Door D1 0.75 m x 2.10m |
| 20 | Door D 1.20 m x 2.10 m |
| 21 | Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete |
| 22 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 23 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 24 | Provision for Electrification |
| 25 | Light point ( SD 18 ) |
| 26 | CFL SD 80 |
| 27 | Service Wire |
| 28 | GI Pipe 40mm dia |
| 29 | Provision For Water Supply and Sanitary arrangements |
| 30 | PVC pipe 32mm dia |
| 31 | PVC Elbow 32mm dia |
| 32 | PVC Tee 32mm dia |
| 33 | PVC pipe 20mm dia |
| 34 | PVC Elbow 20mm dia |
| 35 | PVC Tee 20mm dia |
| 36 | PVC tap |
| 37 | Indian Water Closet |
| 38 | Europian Water Closet |
| 39 | Washbasin |
| 40 | PVC pipe 4 inch dia |
| 41 | PVC Door Elbow 4 inch dia |
| 42 | PVC Tee 4 inch dia |
| 43 | Syntex Tank 500Lit |
| 44 | Supply and fixing of RCC Rings with lids |
| 45 | 900mm dia Rings |
| 46 | 900mm dia lids |
| 47 | Provision for Name board |
| 48 | GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender