Tender For Work For 2-No, 11 Kv Line Shifting Over The Land Alloted Fo 30 Mw Solar Plant Nearly/Mohali Village Under S/D Aen (O&M), Jvvnl, Bari
Tender Value
8.30 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
0 days left
EMD
16618
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dholpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work For 2-No, 11 Kv Line Shifting Over The Land Alloted Fo 30 Mw Solar Plant Nearly/Mohali Village Under S/D Aen (O&M), Jvvnl, Bari
BOQ
| Sl. No. | Item Description |
| 1 | Part - A -Erection work |
| 2 | Trimming of tree branches/plants and preparing route approchases for proposed line. |
| 3 | Excavation of pit in Hard rock ( Where blasting/drilling is required) to erect various supports and stay sets including |
| 4 | (A) Height of poles/R.S.Joist/M.S. Rail Size of pit |
| 5 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 6 | (B)Lattice tower/size of of pit |
| 7 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 8 | (C) Stay set/Depth of Pit |
| 9 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 10 | Safe carriage of PCC poles including loading / un-loading |
| 11 | (C) 9 Mtr. Long 200 Kg. PCC pole |
| 12 | Within 10 Kms |
| 13 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 14 | Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site |
| 15 | Within 10 Kms. |
| 16 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 17 | Safe Carriage of Insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. |
| 18 | Within 10 Kms. |
| 19 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 20 | Safe carriage of fabricated lattice towers structures and sub-station structures type AB, AB beams, isolators structures etc. including loading/unloading and stacking in the Nigam. Stores / at work site. |
| 21 | Within 10 Kms. |
| 22 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 23 | Erection of all type of steel supports in the excavated pit in alignment after checking the same with plumb line including fixing of cross arms and top hamper before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the remaining portion of the pit will be back filled with soil. The nuts & bolts will be provided by the contractor as per Nigam's specification for which payment will be made at the prevailing store issue rates. The cost muffing and grouting will be paid extra. |
| 24 | Lattice Structure |
| 25 | Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates. |
| 26 | (B) IN RURAL AREA |
| 27 | PCC Poles 9 Mtr. Long(200Kg.) |
| 28 | Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 29 | 6\\"x5/8\\" with 7/10 SWG stay wire |
| 30 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 31 | Supplying and laying of randum rubble stone boulder having weight not less than 20 kgs. |
| 32 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 33 | Fixing and assembly of disc.point channel pair with pilot plates top hampers & clamps on erected single pole structure as per design. The nuts &bolts are to be provided by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates, |
| 34 | 11 KV line |
| 35 | Fixing of 11kv B&S/T&C type disc insulator of 11kv lines (each unit consiting of 1 Nos. disc & 1 set of H/W ) on terminal point including fixing of hardware and strips. |
| 36 | Fixing of 11 KV pin insulator with pins. |
| 37 | Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate. |
| 38 | (B) IN RURAL AREA |
| 39 | ACSR Rabbit |
| 40 | Supply of MS nuts & bolts |
| 41 | Part - B -Dismentalling work |
| 42 | Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates. |
| 43 | (B) IN RURAL AREA |
| 44 | PCC Poles 9 Mtr. Long(200Kg.) @ 60% |
| 45 | Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of top bracing of M.S.Channels with pilot plates and clamps.The support is to be back filled with soil with proper ramming.The nuts &bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. |
| 46 | PCC Poles 9 Mtr. Long(200 Kg.) @ 60% |
| 47 | Fixing of cross arms with clamp on erected support as per design. The nuts &bolts will be supplied by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates. |
| 48 | 11 KV cross arms @ 60% |
| 49 | Fixing of top hampers with clamp on erected support as per design. The nuts &bolts will be supplied by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates. |
| 50 | 11 KV Top Hampers @ 60% |
| 51 | Fixing and assembly of disc.point channel pair with pilot plates top hampers & clamps on erected single pole structure as per design. The nuts &bolts are to be provided by the contractor as per Nigams specification for which payment will be made as per prevailing Discom store issue rates, |
| 52 | 11 KV line @ 60% |
| 53 | Fixing of 11kv B&S/T&C type disc insulator of 11kv lines (each unit consiting of 1 Nos. disc & 1 set of H/W ) on terminal point including fixing of hardware and strips. @ 60% |
| 54 | Fixing of 11 KV pin insulator with pins. @ 60% |
| 55 | Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate. |
| 56 | (B) IN RURAL AREA |
| 57 | ACSR Rabbit @ 60% |
| 58 | Part - C - Safe carriage of Dismantled items |
| 59 | Safe carriage of PCC poles including loading / un-loading |
| 60 | (C) 9 Mtr. Long 200 Kg. PCC pole |
| 61 | Within 10 Kms |
| 62 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 63 | Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site |
| 64 | Within 10 Kms. |
| 65 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 66 | Safe Carriage of Insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. |
| 67 | Within 10 Kms. |
| 68 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender