Tender For Rate Contract For Fabrication Work To Maintain Water Supply At Various Water Supply Schemes Under Sub Div Asind.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
10 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhilwara → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rate Contract For Fabrication Work To Maintain Water Supply At Various Water Supply Schemes Under Sub Div Asind.
BOQ
| Sl. No. | Item Description |
| 1 | Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost. |
| 2 | 80 mm dia |
| 3 | 100 mm dia |
| 4 | 125 mm dia |
| 5 | 150 mm dia |
| 6 | 200 mm dia |
| 7 | Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store ownhis cost. |
| 8 | 32 mm |
| 9 | 50 mm |
| 10 | 65 mm |
| 11 | 80 mm |
| 12 | Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. |
| 13 | 32 mm |
| 14 | 40 mm |
| 15 | 50 mm |
| 16 | 65 mm |
| 17 | 80 mm |
| 18 | 100 mm |
| 19 | 125mm |
| 20 | Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. |
| 21 | At Workshop |
| 22 | On Site |
| 23 | Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In-Charge complete in all respect. |
| 24 | Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate |
| 25 | Up to 12 mm) dia. Hole |
| 26 | Above 12 mm dia. Hole. |
| 27 | Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concern's divisional store own his cost. |
| 28 | 50 mm |
| 29 | 65 mm |
| 30 | 80 mm |
| 31 | 100 mm |
| 32 | Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes. |
| 33 | Sluice Valve Size 80mm |
| 34 | Sluice Valve Size 100mm |
| 35 | Sluice Valve Size 125mm |
| 36 | Sluice Valve Size 150mm |
| 37 | Sluice Valve Size 200mm |
| 38 | Sluice Valve Size 250mm |
| 39 | Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. |
| 40 | Sluice Valve Size 80mm |
| 41 | Sluice Valve Size 100mm |
| 42 | Sluice Valve Size 125mm |
| 43 | Sluice Valve Size 150mm |
| 44 | Sluice Valve Size 200mm |
| 45 | Sluice Valve Size 250mm |
| 46 | Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plateincluding material for the following sizes. |
| 47 | Sluice Valve Size 80mm |
| 48 | Sluice Valve Size 100mm |
| 49 | Sluice Valve Size 125mm |
| 50 | Sluice Valve Size 150mm |
| 51 | Sluice Valve Size 200mm |
| 52 | Sluice Valve Size 250mm |
| 53 | Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for thefollowing sizes. |
| 54 | Sluice Valve Size 80mm |
| 55 | Sluice Valve Size 100mm |
| 56 | Sluice Valve Size 125mm |
| 57 | Sluice Valve Size 150mm |
| 58 | Sluice Valve Size 200mm |
| 59 | Sluice Valve Size 250mm |
| 60 | Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). |
| 61 | 2\\" dia. Size (50 mm) |
| 62 | 2 ½\\" size (65 mm) |
| 63 | 3\\" dia size (80 mm) |
| 64 | 4\\" dia size (100 mm) |
| 65 | Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm). |
| 66 | 2x2 ½ “ dia size (50 x 65 mm) |
| 67 | 2 ½ “x 3” dia size (65 x 80 mm) |
| 68 | 2”x 3” dia size (50 x 80 mm) |
| 69 | 3”x 4” dia size (80 x 100 mm) |
| 70 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 71 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender