Power Boards / Undertakings / PSU Closing in 5 days TDR #57804656

Tender For Constructing 0.95 Km 11 Kv Line From Puthiya Palam To Pulikuzhi Under Electrical Section Parippally

Issued by Boards / Undertakings / PSU · Kollam, Kerala
Tender Value
5.48 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
5 days left
EMD
13800
Bank guarantee accepted
Document Fee
1300
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Constructing 0.95 Km 11 Kv Line From Puthiya Palam To Pulikuzhi Under Electrical Section Parippally

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 15-Oct-2026 Date Corrigendum-3 Date 30-Oct-2026
2 03-Nov-2026 Date Corrigendum Date 16-Nov-2026
3 17-Nov-2026 Retender Date Corrigendum Date 28-Nov-2026

BOQ

Name of Work:- Constructing 0.95 km 11 kV line from Puthiya palam to Pulikuzhi under Electrical Section Parippally
Sl. No. Item Description
1LABOUR
2(112) Fitting and erecting one HT PSC SinglePole in position, including fitting crossarm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing).
3(115) Additional rate for providing one discset, PG clamp etc. complete, on any typeof HT pole for making cut point.
4(702) Labour charges for loading HT PSC polefrom the stacking place and unloadingthe same at work site (transportation byany vehicle).
5(170) Fitting one Additional 75x40mm, 1.8mChannel cross arm in existing single poleincluding conveyance of materials.
6(128) Additional rate for excavation of one Pitfor HT Pole/HT Stay in Hard Laterite.
7(726) Transporting poles by hired vehicle to adistance upto 5km and carrying upto 4numbers of poles excluding loading&unloading charges.
8(116) Fitting and erecting one HT Double PoleStructure using PSC pole in positionincluding fitting 2 channel cross arms,digging and back filling pit in ordinarysoil, drawing sufficient length of GIearthing leads through all cross arms tothe ground for earthing (excludingprovision of earthing).
9(171) Fitting one Additional 2.4m/3m Channelcross arm (100x50x6mm), in existing11kV DP including conveyance ofmaterials.
10(27.10) Fiting One No MVT on existing crossarm excluding termination work (forOne phase) of any rating for 11 kV ABCable
11(363) Drilling hole of various sizes on existingChannel/Cross Arm.
12(127) Additional rate for excavation of one Pitfor HT Pole/HT Stay in Laterite.
13(167) Fitting one set AB switch on existingDP, giving connection and drawingsufficient length of GI earthing leads tothe ground for earthing, excludingprovision of earthing.
14(113) Fitting and erecting one HT A typeSingle Pole in position, including fittingcross arm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing).
15(132) Additional rate for excavation of Pit forA type pole in Hard Laterite.
16(952) Providing concrete muffing of size0.45x0. 45x1.5m (0.5m above GL and1m below GL). Excavation0.45x0.45x1m, concrete (1:3:6, 20mm)0.45x0.45x1.5m, Plastering (1:3) 12mm0.45x0.45mx5sides.
17(119) Fitting and providing one HT Stay for11kV pole, including digging and backfilling pit in ordinary soil.
18(4.66) Providing additional HT stay insulator inexisting stay.
19(C-202425-4575-1) Stringing of 11KV, 99sqmm, XLPEcovered conductor including fitting of allaccessories, providing end terminations,midspan joints, pipe earthing, installinginsulated piercing connectors etc.
20(554) Dismantling (without damage) one LTPSC/RCC pole after disconnecting stays,strut etc. attached thereon and stackingthe same.
21(553) Dismantling one damaged LT PSC/RCCpole after disconnecting stays, strut etc.attached thereon and stacking the same.
22(420) Transferring LT three phase 4/5 wire OHline to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete.
23(419) Transferring LT single phase 2/3 wireOH line to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete.
24(451) Disconnecting and lowering down thesingle phase WP service connection withguy wire from the OH line andreconnecting the same after completingthe line work.
25(452) Disconnecting and lowering down thethree phase WP service connection withguy wire from the OH line andreconnecting the same after completingthe line work.
26(610) Dismantling one ordinary streetlight/CFL/LED fitting from existing poleand refitting the same on newly erectedpole including disconnecting andreconnecting wires.
27(676) Cutting trees having girth beyond 30cmbut upto and including 60cm (fellingtrees including cutting of trunks andbranches) and removing the rootcompletely and stacking etc. 1 No.
28(677) Cutting trees having girth beyond 60cmbut upto and including 120cm (fellingtrees including cutting of trunks andbranches) and removing the rootcompletely and stacking etc. 1 No.
29(678) Cutting trees having girth beyond 120cmbut upto and including 180cm (fellingtrees including cutting of trunks andbranches) and removing the rootcompletely and stacking etc. 1 No.
30(120) Fitting and providing one Strut using HTPSC pole including digging and backfilling pit in ordinary soil.
31(163) Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns)including digging separate pit(0.45x0.45x1.5m) at standard distanceaway from the pole/structure in ordinarysoil & backfilling.
32(955) Providing one Earth using GI earth pipeof size 38.1mm dia, 2.5m lengthincluding digging separate pit(0.45x0.45x2.5m) at standard distance(1.5m) away from the pole/structure inordinary soil & backfilling the pit with15cm alternate layer of charcoal, salt andsand up to 90cm from the bottom.including the cost of 20kg salt, 25kgcharcoal, excluding supply of earth pipe.
33(161) Additional rate for excavation of oneEarth Pit (2.5m depth) in Hard Laterite.
34Total of BoQ1 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57804656
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 5.48 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Constructing 0.95 Km 11 Kv Line From Puthiya Palam To Pulikuzhi Under Electrical Section Parippally
Basic Detail
Tender No ET No. 14/26-27/ Dtd 20.08.2026
Bidding Type Tender
Location
City Kollam
State Kerala
Key Dates
Publish Date 17 Nov 2026
Submission Date 28 Nov 2026
Open Date 03 Dec 2026
Finance
Tender Value 5.48 Lakhs
Tender Fee 1300
EMD 13800
Exemption Not Available
Document List
ad5f4c4b-710d-4ee8-abb4-6bf7fdf89ec7.html
BOQ_1485453.xls
RetenderCorr.pdf
sketch.pdf
Tendernotice_1 (23).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 30, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 16, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 28, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

ad5f4c4b-710d-4ee8-abb4-6bf7fdf89ec7.html

xls

BOQ_1485453.xls

pdf

RetenderCorr.pdf

pdf

sketch.pdf

pdf

Tendernotice_1 (23).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender