Tender For Repair & Maintenance Of Drains, Inspection Chambers & Septic Tank And Providing & Fixing Of Mosquito Proof Jali Doors At Residential Quarters Of Sector-02 Of Rihand Colony Pipri, Sonebhadra. (U.P.)
Tender Value
15.99 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
32000
Bank guarantee accepted
Document Fee
1888
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Drains, Inspection Chambers & Septic Tank And Providing & Fixing Of Mosquito Proof Jali Doors At Residential Quarters Of Sector-02 Of Rihand Colony Pipri, Sonebhadra. (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-01 Repair and Maintenance of Drains, Inspection Chamber and Septic Tank of Residential Quarters at Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) |
| 2 | Engagement of helper/ Beldar for non-measured work such as cleaning of site and other miscellaneous work as per direction of Engineer-in-charge. |
| 3 | Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the colony area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. |
| 4 | Supply and sprinkling of lime in all drains of colony and water logged area including cost of all labour,materials,and T&P etc, as required for proper completion of the work. |
| 5 | Cleaning of Inspection chamber including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. |
| 6 | Concrete with 4cm. gauge stone ballast down graded, coarse sand of 2.5 fineness modulus and cement in proportion of 1:3:6 in foundation and under floors including cost of all materials, labour, tools and plants etc. required for proper completion of work. |
| 7 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level |
| 8 | R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 for slabs with coarse sand excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. binding wire and also including cost of all materials. cost of binding wire, labour and T&P etc. required for proper completion of work. |
| 9 | Steel reinforcement for R.C.C. work with TMT steel of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete and including supply of steel, its wastage, labour and T&P etc. complete . |
| 10 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortars in foundation and plinth including cost of all material, labour and T&P etc. required for proper completion of work. |
| 11 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than one brick thick. (230mm). |
| 12 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than half brick thick. (115mm). |
| 13 | 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 14 | 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 15 | Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. |
| 16 | Laying of neat cement punning over plastered surface including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 17 | Providing and laying 110 mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work including cost of all materials, labour and T&P etc. required for proper completion of the work. |
| 18 | Schedule- 02 Providing and fixing of Mosquito proof Jali Door at Residential Quarters of Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) |
| 19 | Engagement of Blacksmith/Welder for non-measured work in repair and maintenance of wood work as per direction of Engineer-in-charge with all T&P required (Labour rates only). |
| 20 | Engagement of carpenter for non-measured work in repair and maintenance of wood work as per direction of Engineer-in-charge with all T&P required (Labour rates only). |
| 21 | Engagement of helper/ Beldar for non-measured work such as helping carpenter, blacksmith/ welder and other miscellaneous work as per direction of Engineer-in-charge. |
| 22 | Steel work welded in built up gratings, frames, guard bar, ladder, railings, brackets, gates and similar sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 23 | Providing and fixing fly/Mosquitos proof galvanized M.S. wire gauge to doors, windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions and wood beading 62X19 mm with wire of dia 0.63 mm all complete. |
| 24 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level |
| 25 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than one brick thick. (230mm). |
| 26 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than half brick thick. (115mm). |
| 27 | 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 28 | 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 29 | Painting Two coat of superior quality of synthetic enamel paint approved make on New/ old wooden / iron surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 30 | 4cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement as specified and removing over lapping of mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 31 | Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. |
| 32 | Labour cess @ 1% on value of all above itemes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender