Tender For Comprehensive And Day To Day Maintenance And Certain B/R Repair To Various Otm Accn At Vsn Chiloda
Tender Value
45 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive And Day To Day Maintenance And Certain B/R Repair To Various Otm Accn At Vsn Chiloda
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Demolition of brickwork built in cement mortar including work all quoins, aches, pillars, etc complete all as specified and directed. |
| 5 | S & F Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.. |
| 6 | Demolition of RCC (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing,chajjas, parapet, lintel beam etc and similar suspended work complete all as specified and directed. |
| 7 | M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 8 | M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 complete all as specified and directed. |
| 9 | Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris out side MOD Land complete all as specified and directed. |
| 10 | M&L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering in CM 1:4 on concrete surfaces / fair faces of brick masonary wall including mixed with water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for new plastered surfaces of wall and applying two coats of oil bound distemper over chalk whiting on plastered surfaces preparotory to distempering including preparation complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of wall over applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 14 | M&L for raking out joints in floor / wall tiling and pointing with white cement mixed with colour pigment to match complete all as specified and directed. |
| 15 | M&L for Vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 16 | All as per Srl item No 15 here-in-before but on vertical surfaces / skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 17 | M & L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 18 | All as per item No 17 here-in-before but on vertical surfaces / skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 19 | M & L for glazed ceramic colour tiles in vertical surfaces 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 20 | M&L for glazed ceramic coloured tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm / 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat of 10mm thick in CM (1:4) complete all as specified and as directed. |
| 21 | M&L for Non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.. |
| 22 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not.exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 23 | All as per Srl item No 22 here-in-before but on vertical surfaces / skirting /dados etc including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 24 | M&L for 18 to 20mm thick prepolished machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed. |
| 25 | M&L for 18 to 20mm thick prepolished machine cut kota stone slab, in skirting/dado laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of the slab complete all as specified and as directed. |
| 26 | M&L for 18-20mm thick Lakha Red/Granite (of any type) tiles machine cut, in skirting/dado laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 27 | M&L 18-20mm thick Lakha Red/Granite tiles (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform etc over 15mm thick screed bed and like in cement mortar (1:6) including grinding and polishing complete all as specified and as directed. |
| 28 | S&F Dholpur stone 16 to 18mm thick ,cladding gang saw cut with machine cut edges, uniform colour of euch stone size not exceeding 0.25 sqm fixed with and including one number SS clamps (grade-202) of flat 30mm x 2mm, 150mm long made to shape in each slab making V groove at top and bottom of stone and drilling hole for hold fastner polishing rubbing & including silicon treatment complete all as specified and directed. |
| 29 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl 15 mm thick screed bed in CM 1:6 with grey cement and pigment complete all as specified and as directed. |
| 30 | M&L for 60mm Machine pressed precast conctete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 31 | M&L Digital/ Double Charged Polished Vitrified tiles 15 mm thick (square/ rectangular) polished, area of each tiles not more than size 3 Sqm, in floors etc over 15mm thick CM (1:6) screed bed. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles adhesive as per manufactrurer's instructions complete all as specified and directed. |
| 32 | M&L Digital / Double Charged Polished Vitrified tiles 15 mm thick (square/ rectangular) polished, area of each tiles not more than 3 Sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles adhesive as per manufactrurer's instructions including backing coat 10mm thick in cement plaster 1:4 and tile adhesive etc complete all as specified and as directed. |
| 33 | M & L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including joint filling of colour cement and pigment etc as per specification complete all as specified and directed. |
| 34 | S&F PVC Wall panelling of Multi Chambered UPVC Panel of 295mm Wide , 2900mm Length,10mm Thickness,1mm Wall thickness with 10 mm thick ribs, Can be interlocked by tongue n groove method Flat Surface with Multiple Grooves in between for Aesthetic Look ,Shall be Availed in Flat, 2/7/ 9 Groove pattern. Internal batten shall be made of solid UPVC foam profile with 26 mm width and 8mm thick. Batten aligned horizontally along the wall with 50 mm gap above the floor & below the ceiling, Internal battens shall be fixed 450mm centre to centre in between. Junctions & corners should be covered by solid foam beading profiles complete all as specified and directed.(Make :-Veenus/Giza/Sintez or equivalent make as approved by GE in writing ) |
| 35 | M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as in level course complete all as specified and as directed complete all as specified and directed. |
| 36 | M&L for 50mm thick PCC ( 1:2:4) type B-1,(12.5mm graded aggregate) in sub floors, floors bases and paving finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L for plain cement concrete (1:4:8) type D-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 38 | M&L for 75 mm thick plain cement concrete (1:2:4) type B-2 (40mm graded aggregate) in flooring and similar works complete all as specified and directed. |
| 39 | M&L for 75 mm thick PCC ( 1:3:6) type C-2,(20mm graded aggregate) as in plinth protection including joint filling etc complete all as specified and directed. |
| 40 | M&L for 75mm thick Cement concrete type D-2 1:4:8 (40 mm graded graded aggregate) as in sub base of floor finishes and pavings and similar works complete all as specified and directed. |
| 41 | M&L for reinforced cement concrete nominal mix in type B-1 (1:2:4) (20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels and similar works complete all as specified and directed. |
| 42 | M&L for RCC (Nominal Mix) Type B1 (1:1.5:3) (20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc complete all as specified. |
| 43 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 44 | All as per Srl item No 43 but 6mm to 8mm dia complete all as specified and directed. |
| 45 | M&L for steel form work to concrete foundation, footings, raft beam, plinth beam of in flat surface and rough finished surfaces of concrete complete all as specfied and as directed |
| 46 | M&L for steel form work to side and soffit of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 47 | Providing and fixing factory made uPVC white /coloured fixed window area n exc 2.0 Sqm made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +– 0.2 mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5.5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 48 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 49 | Providing and fixing factory made uPVC white / coloured casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5.5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 50 | Dismantling and Taking down existing water proofing treatement with base of cement concrete of any description and any thickness and removing debris (dismantled materials) outside MD land and cleaning properly the site etc complete all as specified and directed. |
| 51 | M&L for 40 mm thick plain cement concrete (1:2:4) type C-0 (using 12.5mm graded stone aggregate) as in padding complete all as specified and directed. |
| 52 | M&L for rendering in CM (1:4) 10mm thick over RCC roof / brick wall mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed. |
| 53 | Supply only liquid water proofing compound all as specified and directed. |
| 54 | M&L for preparing clean and dried plaster surface and applying a coat of oil based bitumen primer confirming to IS No. 3384 - 1986 @ 0.30 litrs/ Sqm and then laying APP polymer modified mebrance 3mm thick with non woven polyester reinforcement membrane (3.50 Kg/Sqm) having thermal insulation with mineral gravel finish on uppar side of membrane and laid by by torch application method to the entire surface all as specified and directed. |
| 55 | M & L for providing cement concrete type B1 1:2:4 as in coping, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed. |
| 56 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 57 | M&L for ATT Along the internal and external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes minimum 300mm depth @ 300mm c/c etc in apron complete all as specified and as directed. |
| 58 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each complete all as specified and directed. |
| 59 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed. |
| 60 | Taking down shutters of any description exc 1sq. m but n exc 2.00 sqm each complete all as specified and directed. |
| 61 | Taking down aluminium chowkats with shutters of any size/description including glass panes, rubber packing, snap beading, particle/partition board etc, complete all as specified & directed. |
| 62 | S&F in pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packed with PCC 1:3:6, back side all around frame complete all as specified and directed. |
| 63 | S&F in pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packed with PCC 1:3:6, back side all around frame complete all as specified and directed. |
| 64 | S&F in 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 65 | S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed |
| 66 | S&F in 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, but divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 67 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed. |
| 68 | S&F in Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 69 | S&F in Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core etc supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 70 | S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 71 | S&F in 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 72 | S&F in 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21,complete all as specified and directed. |
| 73 | S&F in aluminium extruded alloy handles fabricated type anodised of size 150mm complete all as specified and directed. |
| 74 | S&F in aluminium anodised barrel tower bolt of size 200mm long extruded section complete all as specified and directed. |
| 75 | S&F in 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed. |
| 76 | S&F in repairs 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed. |
| 77 | S&F 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specified and directed. |
| 78 | S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed. |
| 79 | S&F in stainless steel wire cloth 0.50mm nominal dia of wire and average width of apertujre 1.18m fixed with MS screw and bolts complete all as specified and directed. |
| 80 | S&F in repairs stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts all as specified and as directed. |
| 81 | S&F in repairs aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts in repairs all as specified and as directed. |
| 82 | S&F in repairs aluminium anodised barrel tower bolts of extruded section of length 100 mm,complete all as specified and directed. |
| 83 | All as per Srl item No 82 here-in-before but length of tower bolt 150 mm complete all as specified and directed. |
| 84 | S&F in repairs 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed. |
| 85 | S&F in repairs hasp and staple safety type of size 100 mm of aluminium anodized complete all as specified and directed. |
| 86 | S&F in repairs aluminium extruded alloy handles fabricated type anodised of size 150 mm complete all as specified and directed. |
| 87 | S&F in repairs mild steel chromium plated fancy type handle 125 mm size for built in steel/Wooden cupboard complete all as specified and directed. |
| 88 | S&F in repairs stainless steel fancy type handles of size 200 mm complete all as specified and directed. |
| 89 | S&F in repairs 150mm brass handles, fabricated type and polished complete all as specified and directed. |
| 90 | S&F in repairs 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 91 | S&F in repairs 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as as specified and directed. |
| 92 | M&L for fixed in repairs 6 mm thick plywood as in cover for cooler, air conditioner or simillar works etc fixed at window incl taking down with necessary cutting and waste complete all as specified and directed. |
| 93 | M&L for fixed in repairs 12 mm thick plywood incl taking down with necessary cutting cutting and waste complete all as specified and directed. |
| 94 | M&L for fixed in repairs 18 mm thick plywood incl taking down with necessary cutting cutting and waste complete all as specified and directed. |
| 95 | M&L for fixed in repairs 12 mm thick Particle board, medium density , flat pressed single line layer type or three layer type with BWR type adhesive fixed with screw to timber frame work incl taking down with necessary cutting complete all as specified and directed. |
| 96 | M&L for fixed in repairs 18/19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , or aluminum frame work , incl taking down with necessary cutting complete all as specified and as directed. |
| 97 | Extra over rates for external teak wood lipping 6 mm thick ,width 18 to 20 mm fixed with nails complete all as specified and directed. |
| 98 | M & L in repairs 2nd class hardwood for plain fillets ,square ,rectangular or triangular in sectional area exc.6 Sqcm & n. exc 13 Sq cm clean swan,secured with nails or brads incl staining and Varnishing incl necessary nails / screws etc complete all as specified and directed. |
| 99 | S&F in repairs door seal aluminium plate with nylon brush ivory matt having width 6cm colour ivory, matt finishing, material metal with brush incl screw for fixing etc complete. |
| 100 | S&F in repairs Health faucets, hand shower stand / hook only brass cromium plated including screw for fixing on wall etc complete all as specified and directed. |
| 101 | S&F in repairs 6 mm thick rectangular glass shelf with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm ) etc incl taking down old glass shelf all as specified and as directed. |
| 102 | S&F in repairs 10 mm thick glass in shelf size exc 0.5 Sqm and not exc 2 Sqm of selected quality glass, mounted on wall with chromium plated brass screws incl brackets / SS studds incl taking down old glass shelf all as specified and as directed. |
| 103 | S&F in repairs aluminium anodised 20 mm dia tubular towel rail 'D' type 600 mm long complete all as specified and directed. |
| 104 | S&F in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring including taking down old stopper from door complete all as specified and directed. |
| 105 | S&F in repairs 100 mm size mortice lock of aluminium, vertical type,4 levers, complete all as specified and directed. |
| 106 | S&F in repairs looking mirror size 600 mm x 450 mm of selected quality glass, 5.5 mm thick, mounted on 6 mm thick AC building board commercial ply with decorative beading all round incl wood with PVC frame fixed with chromium plated brass screws complete all as specified and directed. |
| 107 | S&F in repairs 20 mm dia decorative aluminium anodised powder coated tubular curtain rod with fancy globes at both end including brackets, end stops fixing with screw/ nails etc complete all as specified and directed. |
| 108 | S&F in repairs aluminium anodised powder coated curtain rod brackets to match with existing 20/25mm dia fixing with screw/nails etc complete all as specified and directed. |
| 109 | S&F in repairs 25 mm dia stainless steel curtain rod with brackets including both side decorative end knobs of SS fixing with screw/ nails/ plugs etc complete all as specified and directed. |
| 110 | S&F in repairs curtain with blade (vertical blinds),or roller blind , having roller , threads / Chain & pully system (clutching mechanism) etc complete complete all as specified and as directed. |
| 111 | Repairs only curtain with blade (vertical blinds),or roller blind , having roller , threads / Chain & pully system (clutching mechanism) etc complete all as specified and as directed. Note: Any items required to be replaced shall be paid under respective items. |
| 112 | S&F in repairs telescope channel 460mm Long 1st quality fancy type suitable for sliding racks of inbuilt cuboards etc all as specified and directed. |
| 113 | S&F in repairs stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame complete all as specified and directed. |
| 114 | S&F in repairs 5.5 mm thick glass,looking mirror size exc 0.5 Sqm and not exc 3 sqm of selected quality glass, with chromium plated brass screws/ brackets/ SS studs in top and bottom (any No) etc complete all as specified and directed. |
| 115 | S&F in repairs brass mortice lock vertical type 6 lever of size 100 mm to 150 mm long with handle complete all as specified and as directed. |
| 116 | M&L for maintenance of floor door spring for aluminium door by greasing, oiling and replacement of screws etc complete all as specified. |
| 117 | S&F in repairs mild steel peg stay 250 mm long for steel window / ventilator complete all as specified and directed. |
| 118 | S&F in repairs Stainless steel peg set of six hooks, fixed complete all as specified and directed. |
| 119 | S&F in repairs anchor and fastners size dia 10 mm ,length 150 mm complete all as specified and directed. |
| 120 | S&F in repairs for fixing angle for brackets should be 40 mm X 40 mm X 6 mm with MS Clamp 600 mm to 700 mm long fixed to cabinets ,wooden cupboard wall hung ,including anchor and fastners , with two coats of synthetic enamel paint to brackets,including making good etc complete all as specified and directed. |
| 121 | S&F in reapirs 25mm x12mm size magnetic catches with plastic body and striking plate including letting in and fixed complete. |
| 122 | S&F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed. |
| 123 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 124 | M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 125 | S&F in repairs double action floor spring hydraulically regulated made up of minimun 1.25 mm thick aluminium alloy sheet foundatin box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with including taking down of door and refixing the same complete all as specified and directed. |
| 126 | S&F in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and directed. |
| 127 | Repair and fixing of notice board, photo frame, and similar work of any description or size , required carpenter work and carry out using petty materials such as nails, screws, struds etc complete all as specified and directed. Note: Any items required to be replaced shall be paid under respective items. |
| 128 | Re-securing or easing and adjusting door without taking down shutters exc 1.00 sq.m and n exc 2.00 sqm each of any description complete all as specified and directed. |
| 129 | Re-securing or easing and adjusting door without taking down shutters exc 2.00 sqm each of any description complete all as specified and directed. |
| 130 | Repairs of loose wooden doors by replacing unserviceable existing hinges, fittings & adjustment for smooth functioning as required (built in steel cupboard) complete all as specified and as directed. |
| 131 | Repair to aluminium door, windows and ventilator including taking down, refixing in same opening after changing glass panes/aluminium sections as required. (Note : Aluminium sections/glass pane shall be measured and paid seperately under respective items) |
| 132 | M&L aluminium powder coated (minimum thickness of powder coating 50 micron) sections suitable for doors frame , window and ventilator complete all as specified and directed. |
| 133 | Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed. |
| 134 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane complete all as specified and directed. |
| 135 | All as per item 134 here-in-before but with 3 mm thick figured glass complete all as specified and directed. |
| 136 | S&F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and as directed. |
| 137 | S&F in repairs 5.5 mm thick plain/tinted toughened glass of selected quality including rubber beading, gasket and all other necessary fittings complete all as specified and directed. |
| 138 | S&F in repairs 12mm thick toughened glass, in partition , in fixed partition wall with SS studds, gaskets and necessary hardware or in any automatic doors, sliding door and similar work incl cutting to shape, drilling holes and aluminium section / machine of selected quality glass, including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed. |
| 139 | S&F in repairs 12 mm thick frosted glass, toughened door frame shutters fixed to wall/floor with suitable stainless steel pivot, stainless steel 450 mm long 'H' Types glass door handle standard, locking arrangement, pivot, floor spring including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed. |
| 140 | M&L 15mm thick homogenous clay tiles in repairs (Elevation Tiles) of size 23x75mm laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of tile complete all as specified and directed |
| 141 | Welding in repairs to steel gates, wicket gates, railings, windows , doors, cupboards etc n. exc 2.5 cm in length and thickness of metal to be welded exc 6 mm but n exc 9mm or similar works, complete all as specified and as directed. |
| 142 | Welding in repairs to steel gates, wicket gates, railings, windows , doors, cupboards etc exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 6 mm but n exc 9mm or similar works, complete all as specified and as directed. |
| 143 | M&L in repairs for anodised aluminium snap grid frame work of size (605mm X 605mm ) using T grid/Cross-T/Wall angle/level clip & suspenders for false ceiling and similar works including hangers 6mm dia. G.I. wire (upto 1200 mm length) size of grid (605 mm X 605 mm ) adjusting level fixed to roof slabs/trusses by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60 mm long and expansion hold fastener 12.5mm dia 40mm long including taking down complete all as specified and directed. |
| 144 | S & F false ceiling tiles of size 595mm x 595 mm, 8 to 10mm thick fixed to aluminium snap grid frame complete all as specified and as directed by Engineer-in-Charge.Make : Saint Gobain / Armstrong / Everest or equivalent. |
| 145 | S & F in repair false ceiling tiles of size 595mm x 595 mm, 8 to 10mm thick fixed to aluminium snap grid frame complete all as specified and as directed by Engineer-in-Charge. Make : Saint Gobain / Armstrong / Everest or equivalent. |
| 146 | S&F in repairs Fully perforated 12mm thick micro regular edged or 10 mm thick square edged G.R.G. (Glassfibre Reinforced Gypsum) False ceiling tiles of size of 595mm x 595mm of approved texture, design and Patten having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476(part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. All accessories should be fixed as per manufacturer's instructions. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- ChargeMake - Gyproc of Saint Gobain/Armstrong or equivalent. |
| 147 | M & L for precast decorative moulding / joint strip (Cross sectional girth not exc 200mm ) and POP along junction of wall and ceiling made of min 8-10mm thick complete all as specified and directed by Engineer-in-Charge. |
| 148 | M&L for aluminium powder coating (powder coated of required colour) three track sliding windows frame top and sides of size 92x31.75x1.5mm (section No 20831), bottom size 92x31.75x1.5mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm (section No 20737) with rubber gasket beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperature and fixed with stainless steel wire staples and fixing 5mm thick glass (plain/tinted/with laminated film) with necessary rubber beading gasket etc complete all as specified and as directed. |
| 149 | M&L Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Glass will be measured separately under respective item) |
| 150 | S&F in repairs stainless steel plate rack , 0.5mm to 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc complete all as specified and as directed. |
| 151 | S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed. |
| 152 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed. |
| 153 | S&F in repairs S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, double bowl overall size 1270 mm x 510 mm ( single bowl size 560mm x 410mm x 200mm ) complete all as specified and as directed. |
| 154 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement are as follows:- Top horizontal 50 mm SS Pipe 01 No ,20 mm SS Pipe 03 No's, 40 mm vertical SS round Pipe for pole 90 CM height complete all as specified and directed. |
| 155 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed. |
| 156 | S&F in Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 157 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts, coach screw and washer in roof in roof, wall etc complete all as specified and directed. |
| 158 | S & F pre painted galvalume aluminum Zinc coating GI based plain steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in ridge ,gutters etc fixed with self tapping screws as specified. |
| 159 | S & F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with coach screw and washer in roof ,wall etc all as specified and directed. |
| 160 | M&L of 16mm thick Polycarbonate sheet (Clear, Bronze, Metallic grey, opal white/blue colours) fixing with 50mm wide aluminium top profile, rubber gasket and suitable size of SDST screws. The clamping shall have provision for rubber gasket for water sealing & silicon sealant shall be used for sealing intersection joints, if any. All the edges of sheets should be closed with suitable tape and aluminium angle complete all as specified and directed. |
| 161 | M & L marble work 18 to 20mm thick (table rubbed and polished) of any shade in steps, jambs, pillars, window cills, cooking platforms and over 15mm thick cement screed bed in CM 1:6 laid and jointed like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified. |
| 162 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 163 | S&F in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 164 | S&F in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 165 | S&F in repair 1.00 mm thick steel rolling shutters,with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type complete all as specified and directed. |
| 166 | S&F in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 167 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 168 | S&F Stone / Marble glossy finish for Aluminium composite panel (ACP) sheet 4 mm thick size (max 3600mm x 1200 mm x 4mm ) of selected quality cladding with silicon and 3M tape, fixed to wooden, concrete, brick, angle frame including aluminium grid frame of size 25x50x2mm thick horizontal and vertical frame c/c 450 mm in wall/ ceiling / column surfaces with necessary cleaning of surface and making surface even and smooth including scaffolding complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 169 | S&F Stone / Marble glossy finish for Aluminium composite panel (ACP) sheet 4 mm thick size (max 3600mm x 1200 mm x 4mm ) of selected quality cladding with silicon and 3M tape, fixed to wooden, concrete, brick, angle frame including aluminium grid frame of size 25x50x2mm thick horizontal and vertical frame c/c 450 mm in wall/ ceiling / column surfaces with necessary cleaning of surface and making surface even and smooth including scaffolding complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender