Tender For Addition/Alteration And Special Repair To Bldg No P-151 And P-152 (Single Sm Living Accn) And Toilets Block Of Building No Np-39 (Single Jcos Living Accn) At Grc Kamtpee.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2026
26 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration And Special Repair To Bldg No P-151 And P-152 (Single Sm Living Accn) And Toilets Block Of Building No Np-39 (Single Jcos Living Accn) At Grc Kamtpee.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding and disposal of rubbish outside of MD land complete all as specified and as directed. |
| 2 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 3 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 4 | All as item No 3 above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete all as specified and as directed. |
| 5 | M&L coloured/printed glazed ceramic tiles 300x450x6 to 7mm thick,300x600x6 to 7mm thick in floors/walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and as directed. |
| 6 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc and disposal of rubbish outside of MD land complete all as specified and as directed. |
| 7 | M&L for Machine cut Kota stone slab flooring 18-25 mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete all as specified and as directed. |
| 8 | Material & Labour for Kota stone slab 12-20mm thick in riser of steps, skirting, dado and pillar laid over backing coat of 10mm cement screed in CM 1:3 complete all as specified and as directed. |
| 9 | S&F pre-polished granite 20mm thick fixed on platform/shelves floor/dado over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as specified and as directed. |
| 10 | Demolition of cement concrete in any description and in any position not otherwise specifically provided for and disposal of rubbish outside of MD land complete all as specified and as directed. |
| 11 | M&L PCC 1:4:8 , type D2, (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 12 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams,lintel beams base for columns and mass concrete etc complete all as specified and as directed. |
| 13 | S&F milt steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed. |
| 14 | Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and disposal of rubbish outside of MD land complete all as specified and directed. |
| 15 | Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.Note:- (WPC shall be measured and paid separately.) |
| 16 | Supply only liquid integral water proofing admixture of make pidilite or its equivalent complete all as specified and as directed. |
| 17 | M&L for rendering 5mm thick CM 1:3 on brick or concrete surfaces of ceiling /chajja's finished even & smooth without using extra cement complete all as specified and directed for taking down plaster portion complete all as specified and as directed. |
| 18 | M&L Preparing New plaster surfaces of wall applying two coats of oil bound distemper over a coat of cement Primer/chalk whiting complete all as specified and as directed.Note:- applied by roller only. |
| 19 | M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over coat of primer and 2-3mm thick wall care putty complete all as specified and as directed.Note:- applied by roller only. |
| 20 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed at any height incuding necessary scaffolding. |
| 21 | Material and labour for waterproof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 22 | Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height incuding necessary scaffolding. |
| 23 | Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces.complete all as directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding. |
| 24 | S & F in repair white Vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed . |
| 25 | S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket(incl. Taking down old cistern ) and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed. |
| 26 | Supply & fixed in repairs table top Wash Hand basin including , waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed. |
| 27 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted S/S stud/plug with chromium plated brass screw and cup washer complete all as specified and as directed. |
| 28 | S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and as directed. |
| 29 | S&F in repair glass shelf 500x125mm with brackets complete all as specified and as directed. |
| 30 | S&F as in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and as directed. |
| 31 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated complete all as specified and as directed. |
| 32 | S&F pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and as directed. |
| 33 | S & F in repairs chromium plated shower square (200mm x 200mm) rose with or without swivel joints incl shower arm as approved complete all as specified and directed. |
| 34 | S&F in repair Stop valves/angle cock, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed. |
| 35 | S&F in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) |
| 36 | S&F in repairs Urinal spreader of brass chromium plated for fixing with 15mm dia pipe complete all as specified and directed |
| 37 | S&F in repair toilet paper holder complete all as specified and as directed. |
| 38 | S&F in repair health faucet of 15 mm bore brass chromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and as directed. |
| 39 | S&F grating doom with/without waste hole 125mm dia of chromium plated complete all as specified and directed. |
| 40 | S&F in repairs Waste fittings, 32/40 mm brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 41 | S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 42 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed . |
| 43 | S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) including necessary elbow, tee, socket, etc of pressure rating 6kg/cm fixed complete all as specified and directed. |
| 44 | S&F in repairs flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and directed. |
| 45 | S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 46 | S&F in repair for 20mm float Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. |
| 47 | Taking down of PVC, pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 48 | S&F in repair PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 49 | S&F in repair PVC (SWR) pipes 75mm dia complete all as specified and directed. |
| 50 | S&F in repair PVC (SWR) bends with access door any radius, 110mm dia complete all as specified and directed. |
| 51 | S&F in repair PVC (SWR) bends with access door any radius, 75mm dia complete all as specified and directed. |
| 52 | S&F in repair PVC (SWR) branch piece, double (double Y) equal or unequal with access door, 110mm dia complete all as specified and directed. |
| 53 | S&F stack clamp made out of 50x5 mm flat iron for 75mm dia of pipe complete all as specified and directed. |
| 54 | S&F stack clamp made out of 50x5 mm flat iron for 100mm dia of pipe complete all as specified and directed. |
| 55 | Taking up or down steel tubing 15mmdia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 56 | Taking up or down steel tubing 20mmdia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 57 | S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing and cutting chases for concealed and making good cutting not exec 10 cm girth in cement mortar 1:3 complete all as specified and as directed. |
| 58 | S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and as directed. |
| 59 | S&F in repair stainless steel draphary curtain rods 25mm bore and 1mm thick, including with brackets/holders etc cut to length as required selected complete all as specified and as directed. |
| 60 | Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed. |
| 61 | Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 62 | S & F for Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing complete all as specified and directed. |
| 63 | S & F for Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel with particle board core design with 2mm thick plain colour PVC Prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 64 | S & F For WPC door frame browm 125 MM X 65 MM for WPC doors complete all as specified and as directed. |
| 65 | Supply and fix WPC Doors water proof materials 30 mm thick both side laminated 650 density hard for all wether resistance complete all as specified and as directed. |
| 66 | Supply and fix WPC Wiremesh Doors water proof materials 30 mm thick both side laminated 650 density hard for all wether resistance complete all as specified and as directed. |
| 67 | S&F mild steel framed work such as grills, gratings etc designed with ends of bars shouldered and/or rivited or forged into spikes conforming to Fe - 290 grade E-165 complete all as specified and as directed. |
| 68 | Supply and fix colour powder coated ( minimum thickness of powder coating 50 micron ) anodised alumunium window and ventilator shutter side hung type without sash bar alumunium sections weighing .55kg/m including necessary joining cleats glazing clips rubber packing anodised alumunium snap beading screws, anodised alumunium fittings such as peg stays 150 mm long ( 1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle ( 1 Nos) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 69 | Supply and fix colour powder coated ( minimum thickness of powder coating 50 micron ) anodised alumunium window and ventilator shutter side hung type without sash bar alumunium sections weighing .55kg/m including necessary joining cleats glazing clips rubber packing anodised alumunium snap beading screws, anodised alumunium fittings such as peg stays 150 mm long ( 1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle ( 1 Nos) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender