Tender For Comprehensive Maintenance Of Avn Units & Bde Hq Under The Aor Of Age B/R-I Of Ge (S) Mamun
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Avn Units & Bde Hq Under The Aor Of Age B/R-I Of Ge (S) Mamun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old plastered surfaces of walls by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush incl removing all nails & washing with clean water down and applying one coat of washable Distemper white or tinted complete all as specified & directed. |
| 2 | M&L for preparation of old plastered surfaces of walls by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush incl removing all nails & washing with clean water down and applying two coats of washable distemper white or tinted complete all as specified & directed. |
| 3 | M&L for prepration of old steel surfaces of any description, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 4 | M&L for prepration of old steel surfaces of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 5 | M&L for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl cornices washing down etc and applying one coat of Exterior Weather paint, white or tinted complete all as specified and directed. |
| 6 | M&L for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl cornices washing down etc and applying two coats of Exterior Weather paint, white or tinted complete all as specified and directed. |
| 7 | M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed. |
| 8 | Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 9 | M&L for brickwork with fly ash bricksas per IS-13757 old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete as specified and directed |
| 10 | All as per description of serial item No. 9.00 here-in-before but except bricks.Note :- Old serviceable bricks retrieved by demolition of brickwork shall be re-used. |
| 11 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 12 | M&L for rendering 15 mm thick plaster in cement mortar 1:4 mixed with liquid WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed. |
| 13 | M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified & directed. |
| 14 | M&L for rendering plaster 10mm thick in cement mortar 1:3 on fascia, edging of Chajjas, ceiling, roof projections etc, including taking out peeled off plaster / concrete and roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified & directed. |
| 15 | M&L preparation of new plastered surfaces of walls, applying 1mm thick wall care cement based putty to make the surface even & smooth and applying two coats of oil emulsion distemper complete all as specified & directed. |
| 16 | M&L for preparation of new plastered surfaces of Walls, applying 1mm thick wall care cement based putty to make the surface even and smooth and applying two coat of Exterior Weather paint, white or tinted complete all as specified & directed. |
| 17 | M&L for preparation of newly plastered external surfaces of walls and applying two coats of cement based paint, white or tinted including curing of surfaces before and after paint complete all as specified and directed. |
| 18 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding (but not backing) and removing serviceable tiles to stores and rubish off the premises complete all as specified and directed. |
| 20 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) in floor etc., area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 21 | M&L for glazed ceramic coloured tiles 450x350x7mm thick in different colour combination as approved by GE, on vertical surfaces such as skirting, dados and riser of steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering 10mm thick in cement mortar 1:4 on brick or concrete surfaces complete all as specified & directed. |
| 22 | M&L for vitrified ceramic tiles 8 to 10 mm thick (Square or rectangular) polished, light shade, of size 1200 x 600 mm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including screed bed or bedding layers 15 mm thick in cement mortar 1:6 complete all as specified and directed. |
| 23 | M&L for Vitrified ceremic tiles 8 to 9mm thick (Square/rectangular), light shade, polished area of each tile not exceeding 0.36 Sqm in floors etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed. |
| 24 | M&L for Vitrified ceremic tiles 8 to 9mm thick (Square/rectangular) polished, light shade, area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 10 mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 25 | S&F in repairs 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls / floor / ceiling including taking down unserviceable tubing etc complete all all as specified. |
| 26 | S&F in repairs 20mm bore tubes medium grade galvanized with all fittings short pieces and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all as specified. |
| 27 | S&F in repair floor mounting single piece Vitreous china wash down water closet pan, light colour, complete including fixing to trap, alongwith PP soft close seat cover, hinges and accessories complete all as specified and directed. |
| 28 | S&F in repairs looking mirror of size 1200mm x 600mm, bevelled edges, with selected quality glass, mounted on 6 mm thick AC bldg board or commercial plywood & fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 29 | S&F in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing there of), including making connections to trap, and to flush pipe incl plastic seat cover closed pattern with stainless steel or aluminised hinging device complete all as specified and directed. |
| 30 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 31 | S & F in repairs Vitreous china wash hand basin, white flat back, size 550 x 400 mm including CP waste coupling 32mm size full thread, 32 mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand complete all as specified & directed. |
| 32 | S&F in repair Viterous china white, urinal, half stall type, incl sprader, CP coupling, GI 50 mm bore waste pipe and all necessary fittings, complete all as specified and directed. |
| 33 | Supply & Fixing in repair chromium plated brass central hole single lever WHB Mixture for mixing hot and cold water, with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe 15 mm bore complete all as specified and directed. |
| 34 | S&F in repair fancy type angular Stop cock 15mm bore pipe, chromium plated cast copper alloy complete all as specified and directed. |
| 35 | S&F in repair folding towel rack, high grade stainless steel, of size 50.2cm x 36.6cm x 5.8 cm with 4 double cross towel hook and swivel towel bar for bathroom fixed to wall with PVC plugs & SS screws complete all as specified and directed. |
| 36 | S&F in repair Bib tap cast copper alloy, chromium plated, fancy type suitable for and fixed for 15 mm bore pipe or union, complete all as specified and directed. |
| 37 | S&F in repair health faucet with hand shower, chromium plated, 8mm dia 1.00 mtr long flexible pipe, hook and wall hook complete all as specified and directed. |
| 38 | S&F in repair PVC connection , 450mm long, with PTMT nuts for 15mm bore pipe, complete all as specified and directed. |
| 39 | S & F in repairs stack clamps for 100 mm dia bore pipe , made out of 50 x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 40 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, fixed to walls or laid in floors complete all as specified and directed.Note:- The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting. Fittings and accessories such as bends, branches, sockets etc.; shall be enumerated afterwards and measured separately. Rates include for all necessary extra joints, cutting and waste. |
| 41 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, fixed to walls or laid in floors complete all as specified and directed.Note:- The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting. Fittings and accessories such as bends, branches, sockets etc.; shall be enumerated afterwards and measured separately. Rates include for all necessary extra joints, cutting and waste. |
| 42 | S&F in repair 75mm bore PVC (SWR) floor trap, plain with CP grating, fixed in cement concrete 1:2:4 type B-1 including jointing to waste pipe complete all as specified & directed. |
| 43 | S&F in repair 110mm dia PVC (SWR) bend any radius complete all as specified and directed. |
| 44 | S&F in repair 75mm dia PVC (SWR) bend any radius complete all as specified and directed. |
| 45 | Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and directed. |
| 46 | M&L for rendering 10 mm thick in cement mortar 1:3 on brick or concrete surfaces of sunken floor & walls finished even and smooth using liquid WPC conforming to relevant IS and as per manufacturer's instructions @ 0.200 ltr in 50 Kg of cement complete all as specified & directed. |
| 47 | M&L for two coats of bitumen blown any grade, applied hot to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed. |
| 48 | Supply only liquid water proofing compound conforming to relevant IS complete all as specified and directed. |
| 49 | M & L for 25 mm thick cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in sub floors, surface finished even and rough to receive floor finish complete all as specified and directed. |
| 50 | M&L for plain cement concrete 1:5:10, type E-2 using 40mm graded stone aggregate as in mass concrete and in sunken floors complete all as specified and directed. |
| 51 | M & L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair incl making joints at every 2.5 m and at corner, joins filled with bitumen 85/25 & sand in ratio 1:2 by weight complete all as specified and directed. |
| 52 | S&F in repair Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall of hanger upto 10 m height, fixed with self tapping screws incl taking down existing sheeting complete all as specified and directed. |
| 53 | S&F Rolled sections as in framing for cladding, glazing and the like using angles/ channels as per site requirement fixed with using butt welded joints etc incl necessary welding work and dismantling of existing iron work completed all as specified and directed. |
| 54 | Taking down existing aluminium doors/windows shutter and refixing to same opening after repairing, easing and adjusting incl replacement of damaged hinges, brass mortise lock, sheet glass, door closer, Elco panel 4 mm thick, floor spring, rubber neoprene packing, aluminium beading, glazing clips and SS screws etc. complete all as specified Note- Mortise lock, sheet glass, hydraulic door closer, floor spring and composit panel shall be measured and paid separately as 'Supply only'). |
| 55 | Supply only Brass mortice lock 4-lever vertical type of 100 mm size complete all as specified etc complete all as specified. |
| 56 | Supply only 4.80 mm thick sheet glass, ordinary quality in square or rectangular covered with solar control film 25 micron reflective type sicked to glass pans fitted with aluminium beading and rubber gasket area exc 0.5 Sqm in each pane complete all as specified and directed. |
| 57 | Supply only 10mm thick Toughned glass as in hinged doors, partitions autometic doors and similar work covered with solar control film 25 micron reflective type sicked to glass pans including cutting to shape, drilling holes required.ns fitted with aluminium beading and rubber gasket area exc 0.5 Sqm in each pane complete all as directed. |
| 58 | Supply only Aluminium (extruded aluminium section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 kg complete all as specified and as directed. |
| 59 | S&F 4.00 mm thick aluminium composit pannel for fixing to aluminium shutter and the like squares with aluminium beading and rubber gasket complete all as specified and directed. |
| 60 | Supply & Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 61 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm each and removing from site complete all as specified and directed. |
| 62 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc. 4.00 Sqm each and removing from site complete all as specified and directed. |
| 63 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 6 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hingesand one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made. ®. (Note: The unit rate shall includes all connected accessories.) Please Enable Macros to View BoQ information |
| 64 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 6 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hingesand one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made. ®. (Note: The unit rate shall includes all connected accessories.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender