Tender For Special Repair To Bldg No P-71 (04 X Type-Ii Md Accn) And Bldg No. P-72 (04 X Type-Ii Md Accn) In Mes Colony Under Ge K Tee.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
90960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-71 (04 X Type-Ii Md Accn) And Bldg No. P-72 (04 X Type-Ii Md Accn) In Mes Colony Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutter from the frames) of any size n.exc 1.5 Sqm and removing from site complete all as specified and as directed. |
| 2 | All as per item No. 01 above but exc 1.5 Sqm and n.exc 4.0 Sqm each complete all as specified and as directed. |
| 3 | Taking down of shutters of any description n.exc 1.0 Sqm each leaf and removing from site complete all as specified and as directed. |
| 4 | All as per Sl item above but exc 1.0 Sqm but n.exc 2.0 Sqm each leaf. |
| 5 | S & F factory made prelam solid PVC door frame of size 50 mm x 47 mm made out of 5 mm both side prelam PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing and complete all as specified and as directed. |
| 6 | S & F factory made solid panel both side prelam PVC door shutter with feathered edge 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded prelam coloured PVC ‘C’ channel having a PVC sheet strip of 30mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and complete all as specified and as directed. |
| 7 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and as directed. |
| 8 | S&F 35mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and as directed. |
| 9 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specified and as directed. |
| 10 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specified and as directed. |
| 11 | S & F PVC factory made solid, PVC moulded prelam sheet on the front face & 2mm prelam PVC sheet on back face for door & cupboard shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing, including with matching PVC door frame, fancy type stainless steel handle hinge, ball catcher and as required necessary fittings as per site requirement complete all as specified and as directed. |
| 12 | S&F mild steel 150 mm helical door spring including roller and roller plate complete all as specified and as directed. |
| 13 | S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 14 | S & F powder coated Anodised aluminium window shutters, side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, roller, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 15 | S&F powder coated Anodised aluminium ventilator shutters, fixed type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 16 | S&F of 4 mm thick plain sheet glass, ordinary quality and glazing or fixed with aluminium windows complete all as specified and as directed. |
| 17 | S&F of 4 mm thick figured glass, fixed to aluminium Ventilator etc complete all as specified and as directed. |
| 18 | Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 19 | S&F mild steel work as in bands, straps, hold fasts, clamps and similar small articles conforming to Fe-290 grade -E-165 complete all as specified and as directed. |
| 20 | S&F in repair of 20mm dia stainless steel drapery rod, fancy type, including SS knobs and SS brackets, fixed in any length complete all as specified and directed. |
| 21 | S&F 20 mm dia brass chromium plated tubular towel rail 'D' type 600mm long and fixed in position with stainless steel screws and plugs complete all as specified and as directed. |
| 22 | S&F 100 mm long stainless steel butt hinges medium weight , welded to steel frame or fixed to chowkat complete all as specified and as directed. |
| 23 | S&F 75 mm long stainless steel butt hinges medium weight , welded to steel frame or fixed to chowkat complete all as specified and as directed. |
| 24 | S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in door complete all as specified and as directed. |
| 25 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 26 | S&F aluminium anodized sliding door bolt 250mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified. |
| 27 | S&F aluminium anodized handle casted type150mm long and fixed complete all as specified. |
| 28 | M&L for for cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in cills, copings, bed blocks, benching, kerbs, filling hollow of pressed steel frame and the like including necessary form work complete all as specified and directed. |
| 29 | M&L for preparation of wood surfaces or wood based materials of any description not otherwise described over 10cm width or girth apply one coat of synthetic enamel paint on old painted wooden surfaces complete all as specified and as directed. |
| 30 | M&L for preparation of steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxed primer complete all as specified. |
| 31 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed. |
| 32 | M&L for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement incl demolition of cement concrete complete all as specified and directed |
| 33 | S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed |
| 34 | M&L for 75 mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and rough to receive tile etc incl demolition of cement conc 75 mm thick as in plinth complete all as specified and as directed. |
| 35 | M&L for Vitrified ultra /double charged Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and as directed |
| 36 | M&L for Vitrified ultra /double charged Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in flooring, set and jointed in neat grey cement slurry and pointed in white or coloured cement to match the shade of the tile incl roughening surface of old concrete/terrazo floor by peecking sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed. |
| 37 | M&L for Vitrified ultra /double charged Ceramic tiles10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. |
| 38 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed |
| 39 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250 x7mm / 450 x 350x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed |
| 40 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and as directed. |
| 41 | M & L for brick work with sub class \\"B\\" old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete incl demolition of brick work built in cement mortar complete all as specified and as directed. |
| 42 | M & L for 15 mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster /Dado of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 43 | M & L for 15 mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster /Dado of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 44 | M & L for 10 mm thick plaster in ceiling of CM (1:4) on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified and as directed. |
| 45 | M&L for preparation of old/new plastered surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 46 | M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over two coats of white putty even and smooth complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered surfaces of walls and applying two coat of weather proof paint (Apex) over a coat of primer in any tint complete all as specified and directed . |
| 48 | M&L for preparation of old/new plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 49 | M&L for complete removal of existing treatment, nails etc of walls and applying two coats of oil bound distemper over two coats of white putty even and smooth complete all as specified and directed. |
| 50 | M&L for complete removal of existing treatment, nails etc of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 51 | M&L for complete removal of existing treatment on old /new plastered surface and applying two coat of weather proof paint (Apex) over 1 mm external wall care putty and a coat of primer in any tint complete all as specified and directed . |
| 52 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed. |
| 53 | M&L precast RCC (1:2:4) type B-1 (using 20mm graded stone aggreagate) as in landings, cover slabs, shelves and similar articles and set in cement mortar (1:4) complete all as specified and as directed. |
| 54 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls incl demolition of reinforeced cement concrete of any description and in any position complete all as specified and as directed. |
| 55 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 56 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 57 | S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified. |
| 58 | S&F in repair valve less syphonic action 10 ltrs capacity PVC low level flushing cistern, white, with inlet, foat valve, handle, brackets, 32mm dia PVC flush pipe etc including fixing and connecting to flushing rim with rubber cone complete all as specified and directed. |
| 59 | Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down 15 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete all as specified and as directed. |
| 60 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete in all respect as specified |
| 61 | S&F in repair 15mm bore angle stop valve brass chromium plated fancy type screwed both ends for iron pipe complete all as specified and as directed. |
| 62 | S&F in repair 15mm bore long body brass bib tap chromium plated fancy type screwed for iron pipe complete all as specified and as directed. |
| 63 | S&F mirror cabinet 400x500mm size complete all as specified and directed. |
| 64 | S&F PVC shelf 450mm size complete all as specified and as directed. |
| 65 | S&F in repair 200mm overhead shower alongwith shower arm, complete all as specified and as directed. |
| 66 | S&F in repair 15mm size PVC connection 450mm long with PTMT nuts and washers at both ends and fixed to iron pipe or brass ferrule complete all as specified and as directed. |
| 67 | S&F in repair 150x150 PTMT grating with waste hole complete all as specified and as directed. |
| 68 | S&F S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm complete all as specified and as directed. |
| 69 | S&F Stainless steel Kitchen plate rack of size 24x30x10 Inch complete all as specified and as directed. |
| 70 | S&F in repair wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange complete all as specified and as directed. |
| 71 | S&F in repair tumbler holder complete all as specified and as directed. |
| 72 | S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 73 | S&F in repair soap dish, brass, chromium plated of size 100mmX100mmX60mm fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed |
| 74 | S&F in repair vitreous china wash hand basin, white, flat back size 550x400mm including cast iron bracket, PVC waste pipe 32mm dia and chromium plated brass waste coupling and 15mm dia brass chromium plated pillar tap and fixed in position complete all as specified and directed. |
| 75 | S&F in repair 20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 76 | S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 77 | S&F in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 110mm dia, jointed with approved adhesive complete all as specified and directed |
| 78 | S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 79 | S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 80 | S&F in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 81 | S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 82 | M&L for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 20mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 incl demolition of 100mm thick PCC complete all as specified and directed |
| 83 | M&L for 50 mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as specified and as directed. |
| 84 | M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc complete all as directed. |
| 85 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 86 | M&L Black granite (of any type) work (table rubbed and polished) 20 mm thick as in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 87 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc of Fe-410-W(Gde E-250) quality, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified and as directed. |
| 88 | S&F mild steel framed work such as monkey protection cage, grills, door frame, gratings with ends of bars shouldered and / or reveted or forged into spikes, framed guard bars and similar work conformig Fe-290 grade -E-165 complete all as specified and as directed. |
| 89 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to end or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing etc and making good, cutting n.exc 10 cm width or girth complete all as specified and as directed. |
| 90 | M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed. |
| 91 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 92 | M&L PCC 1:5:10 type E-2 using 40 mm graded aggregates as in sunken filling and mass concrete incl demolition of cement concrete complete all as specified and as directed. |
| 93 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces over a coat of cement plaster in CM 1:3, 10mm thick with water proofing compound to make leak proof of sunken floors complete all as specified and as directed.Note - WPC shall be measured separately |
| 94 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiselling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance complete all as specified and as directed. |
| 95 | M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof padding finish surface even and smooth without using extra cement including mixed with water proofing compound @ 3% by wt of cement incl demolition of PCC in any description complete all as specified and directed (Note : Water proofing compound will be measured and paid separately) |
| 96 | M&L for rendering 10 mm thick in cm 1:4 in horizontal / vertical surface of brick or concrete surfaces using water proofing liquid compound and finishing surfaces even & fair without using extra cement. complete all as specified and directed. Note: water proofing liquid will be measured and paid separately. |
| 97 | Material & labour for provision of water proofing treatment by using APP torch on mineral/plain finished membrane over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectably complete all as per manufacturers compound complete all as specified and as directed. |
| 98 | Supply only liquid integral water proofing admixture of make pidilite or its equivalent complete all as directed. |
| 99 | S&F in repair rotational moulded PVC water storage tank two layers cylinderical, vertical with closed top of 1000ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete all as specified and directed . |
| 100 | S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 101 | M&L post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 102 | M&L post construction anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 103 | M&L post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 104 | Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of accn including supply & fixing steel wardrobe including chowkhat of same size at the same position of accn all as directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845mm (approximate) having 2 shutter, 06 Nos of 75mm long, medium weight, MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet / welds for storing clothes etc in wardrobe. 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motar 1:3 properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60m approx) 7mm thick glazed tile exc 0.06 sqm and not exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM 1:6 including filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88 m approx) 350x450x7mm thick glazed tile of approved colour and shade shall be fixed over and including backing coat of 10mm thick in CM 1:4 including filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size 1.00x0.60m approx) shall be finished with two coats of OBD over a coat of birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable rawl plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour by spray painting over one coat of red oxide primer including preparation of surfaces. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed. |
| 105 | Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed. |
| 106 | Taking down sheet metal enclosure, DB & MCBs main switch etc and making good disturbed sufaces to match with exisiting surfaces, complete all as specified and directed. |
| 107 | Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed. |
| 108 | Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed.Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 109 | All as per item No 108 but one light point controlled by two, two way switch complete all as specified and directed. |
| 110 | All as per item No 108 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed. |
| 111 | All as per item No 108 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed. |
| 112 | All as per item No 108 above but One 3 pin 5 amps socket out let point on independent board, with 1.5 sqmm multi stranded cable and earth wire with copper conductor of size 1.5 sqmm complete all as specified and directed. |
| 113 | All as per item No 108 above but One bell/buzzer point controlled by one bell push, complete all as specified and directed. |
| 114 | All as per item No 108 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed. |
| 115 | Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed.PVC Conduit.Note:- one run of 3 x 4.0 sqmm and conduit will be measured as one unit. |
| 116 | Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 117 | S & F switch modular 2 way single pole 6 Amp 1 module complete all as specified and directed. |
| 118 | Supply and fixing for socket modular type single pole one way 6 amp 2 module 3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. |
| 119 | Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 120 | Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed |
| 121 | Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed. |
| 122 | Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed. |
| 123 | Supply and fixing bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and directed. |
| 124 | Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed. |
| 125 | Supplying and fixing 20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 220 to 240 V , 50 Hz, CCT 6500K, THD<10% connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. |
| 126 | Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed. |
| 127 | Supply and fixing LED light fitting 10W bulk head luminaries made of diecast alumnium housing with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 220 to 240V, 50Hz, THD<10%, lumen 100 lm /watt, 6500 K complete all as specified and directed. |
| 128 | Supplying and fixing 10 Watt LED Tube light fittings complete with pvc body including tube rod, driver with not less than 1000 Lumen O/P and I/p rated voltage 220 to 240 V , 50 Hz, CCT 6500K, THD<10% connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. |
| 129 | Supply and fix building security light LED 35 W with Lumen O/P 3500 with driver with rated voltage 220 to 240 V, 50Hz, IP 66 including mounting GI (made out of light grade GI pipe of suitable dia) 0.8 m bent two shape including clamps nut bolts etc. complete all as specified and directed. |
| 130 | Supply and Fix ceiling fan 1200 mm sweep complete with 3 blades controllable by regulator min 225 CFM air delivery BEE 5 star rated copper wound Brushless Direct Current(BLDC) motor including all accessories like down rod, electronic circuit board |
| 131 | Supply and fixing Exhaust fan metallic body 300 mm sweep, 1400 RPM single phase, 3 blades 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes for exhaust fan in wall complete all as specified and directed.Note :- Wire mesh shall be fixed outside the opening to prevent insect/flies at no extra cost |
| 132 | Supply and fixing Exhaust fan PVC body 250 mm sweep, 1200 RPM single phase, 230 Volts, 50Hz, 5 blades with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes in window frame of suitable size complete all as specified and directed. |
| 133 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and as directed |
| 134 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. |
| 135 | Supply and fix MCB single pole & neutral 240 volt 32 amps 10 KA, \\"C\\" curve complete all as specified and directed. |
| 136 | Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA, \\"B\\" curve complete all as specified and directed. |
| 137 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 55,422.00] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender