Tender For Providing Of Certain Revenue And Minor Works (Part - Iii) At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
35.75 Crore
Estimated cost
Bid Submission
19 Oct 2026
15 days left
EMD
71600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Certain Revenue And Minor Works (Part - Iii) At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing Kota Stone Flooring including careful removal of slabs without undue breakage, cleaning of adhered mortar from underside, sorting of serviceable and unserviceable slabs, stacking of serviceable materials at site as directed, and disposal of unserviceable materials outside Defence land up to 50 m lead complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed. |
| 3 | M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in factory manufactured ready-mix cement mortar (polymer modified dry mortar) set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed. |
| 4 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in factory manufactured ready-mix cement mortar (polymer modified dry mortar) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in factory manufactured ready-mix cement mortar (polymer modified dry mortar) complete all as specified and directed. |
| 5 | Rounding off edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed |
| 6 | M & L for Mirror polishing on exiting marble/granite/Kota stone/Stone work where ever required to give high gloss finish complete all as specified and as directed by engineer-in-Charge. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge. |
| 8 | M&L for providing and laying joint free premium quality double charged vitrified tiles 10 to 12 mm thick (rectangular/square), of approved make (Kajaria/Somany/Johnson or equivalent), of size as approved, on floor surfaces, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, laid with high performance polymer modified cement based tile adhesive conforming to IS 15477 (Type-2), over and including 15 mm thick screed/bedding layer in factory manufactured ready-mix cement mortar (polymer modified dry mortar) , finished true to line, level and slope as required, with proper alignment and uniform joints, joints filled and pointed with high quality epoxy grout of approved shade, including cutting, surface preparation, curing, wastage, all leads and lifts complete, all as specified and directed by Engineer-in-Charge. |
| 9 | All as per Item no 8 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in factory manufactured ready-mix cement mortar (polymer modified dry mortar) complete all as specified & directed by Engr-in-charge. |
| 10 | M&L for joint free high glossy premium quality colour glazed ceramic wall tiles 8 to 10 mm thick chamfred edges (rectangular/square) of approved make (Kajaria/Somany/Johnson or equivalent), of size as approved, on vertical surfaces such as dado, skirting and walls etc., area of each tile exceeding 0.18 sqm but not exceeding 0.42 sqm, fixed with high strength polymer modified cement based tile adhesive conforming to IS 15477 (Type-2), suitable for heavy duty tiles, over and including 10 mm thick backing coat infactory manufactured ready-mix cement mortar (polymer modified dry mortar) , finished true to line, level and plumb with proper alignment and uniform joints, joints filled and pointed with high performance epoxy grout of approved shade to match the colour of tiles, including necessary mechanical support wherever required for heavier tiles, surface preparation, curing, cutting, wastage, all leads and lifts complete, all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for repair to damage RCC coloumns/Beam/Slab/Chajja by using micro mortar and concrete in Following Stages :-(a) Removing the mortar and loose concrete from RCC elements.(b) Cleaning the rusted reinforcements and applying rust removal.(c) Inserting the addl reinforcements in case the coves sectional area reduction is more than 20 percent by welding the reinforcement with existing bars and supporting adequate on walls if reqiurd with grout.(d) Providing micro morter and concrete over bond coat to cover the reinforcements and slet surface.(e) Providing adequate formwork and scaffolding if required.(f) Curing the surface. Note :- (i) Rust removal, bonding agent, grout, micro mortar and concrete and related chemicals shall be of Dr Fixit/BASF and STP(ii) Work is to be got executed from authorised applicator of the company.(iii) Steel reinforment shall be measured and paid separately |
| 12 | Material and labour for brick work with Fly Ash bricks (old size) straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 13 | S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufaturers all as specified and directed. |
| 14 | S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed. |
| 16 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compa ction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charge. |
| 17 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 18 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 290 (Gde- E- 165) quality- A complete all as specified and directed |
| 19 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position not otherwise specifically provided and removal of rubbish outside MOD land complete all as directed by Engineer-in-Charge. |
| 20 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed. |
| 21 | Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge. |
| 22 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed |
| 23 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVCmulti-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 24 | Supply and fixing factory made uPVC white colour three track three panel sliding window with top fixed glazed portion and bottom sliding shutters comprising two nos. glazed sliding shutters and one no. fly proof stainless steel wire mesh sliding shutter, made out of big series uPVC multi-chambered extruded profiles having outer frame size 116 × 45 mm and sash size 46 × 62 mm or suitable equivalent section, both having wall thickness of 2.3 ± 0.2 mm and glazing bead of appropriate dimension, complete with top fixed glass panel as shown in approved drawing.The window shall comprise uPVC multi-chambered outer frame with inbuilt roller track, sliding sash profiles, interlocks and mullions duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel reinforcement sections manufactured through roll forming process of required shape and size as per uPVC profile. The lower portion shall consist of three sliding shutters, out of which two shutters shall be glazed sliding shutters and one shutter shall be provided with fly proof stainless steel wire mesh.The item includes uPVC glazing beads, interlocks, EPDM gasket, wool pile, zinc alloy / stainless steel touch locks with hook, suitable handles, sliding rollers of approved quality, G.I. fasteners 100 × 8 mm, screws, cleats and all necessary hardware fittings complete. Frame and sash profiles shall be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and proper drainage arrangement for rain water.The frame shall be fixed to finished wall with suitable G.I. fasteners, plastic packers, caps and stainless steel screws complete. The gap between frame and adjacent finished wall shall be filled with approved weather proof silicon sealant over backer rod of approved quality. The item also includes providing and fixing clear / frosted glass of approved thickness in fixed and sliding glazed shutters and stainless steel wire mesh in mesh shutter complete in all respects as per approved drawing, manufacturer’s specification and direction of Engineer-in-Charge.Note:uPVC profiles shall be of approved make, colour and shade.Glass and S.S. wire mesh shall be included in the item rate unless specified separately. Variation in profile dimension on higher side shall be acceptable; however no extra payment shall be made on this account.Measurement shall be taken in sqm of finished window area. |
| 25 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | Supply and fixing factory made uPVC white colour glazed ventilator comprising half portion fixed glazed panel and half portion openable glazed shutter with external uPVC grill, made out of small series extruded uPVC multi-chambered profiles conforming to relevant standards, having outer frame of size 47 × 50 mm, mullion 47 × 68 mm and sash profile of suitable dimension with wall thickness of 1.9 ± 0.2 mm, duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel reinforcement sections manufactured through roll forming process as per required shape and size according to uPVC profile.The ventilator shall consist of one fixed glazed portion and one side/top hung openable shutter as approved by Engineer-in-Charge, complete with glazing bead of appropriate dimension, EPDM gasket, zinc coated / stainless steel friction hinges, handles, locking arrangement, fasteners, screws and all necessary hardware fittings. External side shall be provided with decorative / safety type uPVC grill integrated / fixed with suitable reinforcing members complete in all respects.The profile corners of frame and sash shall be mitred cut and fusion welded at all corners. Mullion (wherever required) shall also be fusion welded including drilling of holes for fixing hardware, drainage arrangement for rain water and ventilation system etc. Frame shall be fixed to finished wall with suitable size G.I. fasteners 100 × 8 mm, plastic packers, anchor fasteners, caps and screws complete. The gap between frame and adjacent finished wall shall be filled with approved weather proof silicon sealant over backer rod of approved quality.The item includes supply and fixing of clear / frosted toughened or float glass of approved thickness in fixed and shutter portions, complete with all fittings, accessories and finishing, all complete as per approved drawing, manufacturer’s specification and direction of Engineer-in-Charge.Note:uPVC extruded profiles for frame, sash, mullion and grill shall be of approved make and colour.Variation in profile dimension on higher side shall be acceptable; however no extra payment shall be made on this account.Measurement shall be taken in sqm of finished ventilator area. |
| 27 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 28 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 29 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge. |
| 30 | M & L for factory made single extruded WPC (Wood Polymer Composite) Glazed/Gauged Skelton door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge. |
| 31 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge. |
| 32 | S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised stainless steel hinge pin, type B-21 complete all as specified & directed by Engr-in-charge. |
| 33 | S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed by Engr-in-charge. |
| 34 | S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified & directed by Engr-in-charge. |
| 35 | S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engr-in-charge. |
| 36 | S&F in repair Stainless Steel curtain roads, standard quality, not less than 19/25 mm dia with heads, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixed on wall for doors and windows curtains, cutting as required length and fixing at site including fixing arrangements, rawl pluig, screws etc (size and dia of rods are directed by Engr-in-charge ) including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engr-in-charge. |
| 37 | Providing, fixing, repairing and replacement of overhead rotational moulded polythene water storage tank 1000 litre capacity, vertical type with closed top, ISI marked, including dismantling of existing water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing from site, hoisting and fixing in position complete.The item shall also include providing and fixing 20 mm bore PTMT float valve with connection nipples (02 Nos), repair/replacement of 20 mm dia gun metal globe/gate valve with iron wheel head screwed both ends, repair/replacement of 20 mm dia high pressure brass ball valve with polythene float and fly nut, all connected GI/iron pipe connections, tightening, jointing with Teflon tape/hemp, testing for leakage, commissioning and making good the disturbed surfaces (including minor civil work, clamps, nuts, bolts, cutting and refixing pipe connections etc.) complete all as specified and directed by Engineer-in-Charge. |
| 38 | Material & Labour for mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works complete all as directed by Engineer-in- charge |
| 39 | M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of new or previously untreated surfaces priming with one coat of read oxide & finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed by Engr-in-Charge. |
| 40 | S & F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm with chromium plated bracket guard and railing 60 cm long all as specified and directed |
| 41 | S & F in repair aluminium hat peg, solid body 125 mm to 175 mm (4 Legs) complete all as specified and as directed by Engineer-in-charge. |
| 42 | S&F in repair towel rails 20mm dia 600mm long brass chromium plated complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in repair chromium plated fancy type soap dish approximate size 160x160x90mm complete all as specified and directed by Engineer-in-Charge |
| 44 | S&F in repair white vitreous china squatting pan Orissa pattern size 580×440 mm with integral foot rests including 100 mm dia P-trap, set in cement concrete 1:5:10 bedding, jointing with cement mortar 1:3, including cutting and making good the floor. Providing and fixing PVC valveless, syphonic action type flushing cistern (10 litre capacity) with 32 mm dia PVC flush pipe and fittings, 15 mm C.P. brass angle stop valve, connection pipe, health faucet (trigger jet spray) with 1.2 m flexible tube, wall hook, C.P. fittings and connecting to water supply line and soil pipe, testing and commissioning complete in all respects.complete all as specified and directed by Engineer-in-Charge.Note: 1. Pan must be ISI marked vitreous china2. Trap size 100 mm dia water seal min 50 mm3. Cistern should be 10 litre low level PVC syphonic type4. Health faucet should be CP brass trigger gun5. Include connection to existing water supply and soil pipe6. Measurement counted as per complete installation (each set) |
| 45 | S&F in repair approved make white vitreous china wash hand basin counter top (bowl type/oval shape) size approx 550×400 mm including C.P. brass single lever mixer tap fancy type (hot & cold), 32 mm C.P. brass waste coupling, 32 mm C.P. bottle trap, two 15 mm C.P. brass angle stop valves, 450 mm long flexible connection pipes (hot & cold), PVC waste pipe connection to floor trap, pair of R.S. or C.I. brackets, fixing with rawl plugs and screws, soap dish, towel ring and making good the wall/tiles, testing and commissioning complete in all respects and directed by Engr-in-charge. Note: 1. Mixer tap/angle valve/stop valve should be CP brass heavy quality (minimum 650 gm).2. Basin must be ISI marked vitreous china.3. Bottle trap should be CP brass (not PVC).4. Include connection to existing water supply & waste line.5. Measurement counted as per each complete set installed. |
| 46 | S&F in repair heavy quality chromium plated brass wall mixer (hot & cold) conforming to IS standards with provision for overhead shower including C.P. brass operating lever, non-return valves, wall flanges, connecting nipples, 15 mm dia C.P. brass shower arm (approx 300 mm long) with shower rose, hand shower (telephonic type) with 1.5 m long flexible tube, wall hook, C.P. spout, connection to existing hot and cold water supply lines, cutting and making good the wall/tiles, testing and commissioning complete in all respects and directed by Engr-in-charge.Notes: 1. Mixer should be heavy CP brass (minimum 1.8–2.2 kg weight)2. Cartridge/diverter type suitable for overhead & hand shower3. Include connection with both hot & cold line4. All fittings must be chromium plated brass5. Measurement: Per complete set installed |
| 47 | Providing and fixing 8 mm thick superior quality mirror glass of approved make, cut to required size and shape, with machine polished/ground edges, fixed to wall over tile/plaster surface using hard wood/PVC cleats, C.P. brass screws and washers including drilling holes in masonry/RCC wall and providing suitable packing, rubber washers and approved quality adhesive/sealant to prevent vibration and moisture entry. The work shall include proper alignment, leveling, making good the disturbed surface and cleaning of mirror surface after fixing complete in all respects as directed by Engineer-in-Charge. |
| 48 | S&F in repair long bib taps 15mm bore cast coper alloy CP long body fancy type, with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engr-in-charge. |
| 49 | S&F Supplying and laying of 15 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 50 | Supplying and laying of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 51 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories) complete all as specified & directed by Engr-in-charge. |
| 52 | Supply & fixing 110mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.Note:-UPVC PIPE AND FITTING / FIXTURE- (i) The testing for leakage of pipe shall be done before connecting the pipes (ii) All pipes shall be minimum 4\\" away from walls fixed with GI bracket (iii) The gully trap shall be minimum 90 cm away from wall.(iv) Seperate pipes for each floor should be provided (v) Sewage and drain system shall be seperate. |
| 53 | Supply & fixing 75 mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge. Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. Note:-UPVC PIPE AND FITTING / FIXTURE- (i) The testing for leakage of pipe shall be done before connecting the pipes (ii) All pipes shall be minimum 4\\" away from walls fixed with GI bracket (iii) The gully trap shall be minim um 90 cm awasy from wall.(iv) Seperate pipes for each floor should be provided (v) Sewage and drain system shall be seperate. |
| 54 | S & F 110mm dia PVC (SWR) bends complete all as specified & directed by Engr-in-charge. |
| 55 | S & F 75 mm dia PVC (SWR) bends complete all as specified & directed by Engr-in-charge. |
| 56 | S & F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified & directed by Engr-in-charge. |
| 57 | S & F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed by Engr-in-charge. |
| 58 | S&F in repair PVC (SWR) floor trap of 75 mm dia outlet plain with grating including CP grating jointing with solvent cement complete all as specified & directed by Engr-in-charge. |
| 59 | Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed |
| 60 | Providing and applying factory manufactured ready-mix cement plaster (polymer modified dry mortar) of average thickness 15 mm on internal / external brick or 5mm on ceiling concrete surface, including surface preparation, hacking of RCC surface, raking of joints of brick masonry, cleaning, wetting, scaffolding, applying plaster in two coats, finishing smooth with trowel, curing for minimum 7 days complete in all respects as directed by Engineer-in-Charge.The rate shall include cost of all materials, labour, water, tools & plants, mixing with potable water only, transportation, loading-unloading and all incidental charges complete.Note : 1. The ready-mix plaster shall be factory manufactured dry mortar produced by an approved reputed manufacturer having ISO certification (ISO 9001 Quality Management).2. Material shall be supplied in original sealed manufacturer packing with batch number, date of manufacturing, shelf life and technical specifications clearly printed on each bag.3. The plaster material shall conform to relevant Indian Standards: (i) IS 1661 (Cement plaster application) (ii) IS 2645 (Integral waterproofing compounds, where applicable) (iii) IS 4031 (Test for cement properties)4. The contractor shall submit the following before use at site: (i) Manufacturer’s test certificate (ii) Product technical data sheet (TDS) (iii) Method statement for application5. No hand-mix proportioning of cement and sand will be permitted in place of ready-mix plaster.6. Each lot of material brought to site shall be subject to approval by Engineer-in-Charge before application.7. Bags older than 3 months from date of manufacture or damaged / moisture affected bags shall be rejected and immediately removed from site.8. The contractor shall store the material: (i) In dry covered shed (ii) On wooden planks (minimum 150 mm above ground) (iii) Away from water, dampness and direct sunlight |
| 61 | 9. Water used for mixing shall be clean potable water only. Use of bore well saline water / contaminated water is strictly prohibited.10. Mixing shall be done only as per manufacturer recommendation using mechanical mixer or pan mixer.11. Hand mixing on floor shall not be allowed. (i) Surface preparation: (ii) Brick joints shall be raked 10 mm deep (iii) RCC surface shall be hacked or bonding agent applied (iv) Surface must be cleaned and pre-wetted before plaster12. The plaster shall be applied in recommended thickness (generally 10–15 mm).Over-thick single coat application shall not be permitted.13. Proper curing shall be carried out for minimum 7 days after application.14. The contractor shall provide manufacturer’s guarantee / warranty certificate (minimum 5 years against debonding and cracks) wherever applicable.15. Any crack, peeling, hollowness or debonding observed during defect liability period shall be rectified by the contractor at his own cost including removal and re-plastering.16. Engineer-in-Charge reserves the right to: (i) Draw random samples from site (ii) Send for laboratory testing (iii) Reject the material if found sub-standard17. Measurement shall be taken for finished plastered surface only. No extra payment for wastage, thickness variation, scaffolding, curing or surface preparation shall be admissible.18. The material shall be of any one of the following approved makes or equivalent approved: Ultratech Readiplast / JK WallMaxX / Magicrete Ready-Mix Plaster / Weber Saint-Gobain / Birla Aeroco |
| 62 | M&L for preparation by suraface with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of premium intetrior acrylic emulsion paint by using brush roller over and including one coat of primer complete all as specified & directed by Engr-in-charge. |
| 63 | M&L for two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on newly plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 64 | M&L for 2 coats of acrylic distemper on newly plastered surfaces on ceiling incl preparation etc. complete all as specified and directed. |
| 65 | M&L for complete removal of existing treament mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of premium intetrior acrylic emulsion paint by using brush roller complete all as specified & directed by Engr-in-charge. |
| 66 | M&L for complete removal of existing surface finishes and treating with two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on old plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 67 | M&L for preparation of old plastered surfaces and appying two coats of acrylic distemper on ceiling complete all as specified & directed by Engr-in-charge. |
| 68 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified directed by Engr-in-charge. |
| 69 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, laying pipe line, laying of cables or fixing poles and stays and struts etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge. |
| 70 | Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge. |
| 71 | Material and labour for Reinforced Ready Mixed Cement Concrete (Design Mix) M-25 as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. |
| 72 | M & L Reinforced Ready Mixed Cement Concrete (Design Mix) M-25 as in Beams, cantilevers,lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs,balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level complete all as specified and directed by Engineer - in – Charge.Note :- Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. |
| 73 | M & L for Form work to sides of concrete foundations, footings, basis of columns sides and soffits of foundation and plinth beams and similar work vertical or to better rough finished flat complete all as specified & directed by Engineer-in- charge. |
| 74 | M & L for Form work to sides of pillars , posts, struts piers, columns and stanchions and similar works rough finished complete all as specified & directed by Engineer-in- charge. |
| 75 | M & L for Form work to sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs etc and similar works rough finished complete all as specified & directed by Engineer-in- charge. |
| 76 | M & L for Formwork to fair finished surfaces soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed by Engineer-in-charge. |
| 77 | M & L for Formwork to sides and soffits of chajjas, troughs and similar items (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge. |
| 78 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 79 | Material and labour for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 80 | Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose) |
| 81 | Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge. |
| 82 | Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. |
| 83 | Material and labour for brick work with Fly Ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 84 | Providing and applying factory manufactured ready-mix cement plaster (polymer modified dry mortar) of average thickness 15 mm on internal / external brick or concrete and 5 mm thick ceiling surface, including surface preparation, hacking of RCC surface, raking of joints of brick masonry, cleaning, wetting, scaffolding, applying plaster in two coats, finishing smooth with trowel, curing for minimum 7 days complete in all respects as directed by Engineer-in-Charge.The rate shall include cost of all materials, labour, water, tools & plants, mixing with potable water only, transportation, loading-unloading and all incidental charges complete.Note : 1. The ready-mix plaster shall be factory manufactured dry mortar produced by an approved reputed manufacturer having ISO certification (ISO 9001 Quality Management).2. Material shall be supplied in original sealed manufacturer packing with batch number, date of manufacturing, shelf life and technical specifications clearly printed on each bag.3. The plaster material shall conform to relevant Indian Standards: (i) IS 1661 (Cement plaster application) (ii) IS 2645 (Integral waterproofing compounds, where applicable) (iii) IS 4031 (Test for cement properties)4. The contractor shall submit the following before use at site: (i) Manufacturer’s test certificate (ii) Product technical data sheet (TDS) (iii) Method statement for application5. No hand-mix proportioning of cement and sand will be permitted in place of ready-mix plaster.6. Each lot of material brought to site shall be subject to approval by Engineer-in-Charge before application.7. Bags older than 3 months from date of manufacture or damaged / moisture affected bags shall be rejected and immediately removed from site.8. The contractor shall store the material: (i) In dry covered shed (ii) On wooden planks (minimum 150 mm above ground) (iii) Away from water, dampness and direct sunlight |
| 85 | 9. Water used for mixing shall be clean potable water only. Use of bore well saline water / contaminated water is strictly prohibited.10. Mixing shall be done only as per manufacturer recommendation using mechanical mixer or pan mixer.11. Hand mixing on floor shall not be allowed. (i) Surface preparation: (ii) Brick joints shall be raked 10 mm deep (iii) RCC surface shall be hacked or bonding agent applied (iv) Surface must be cleaned and pre-wetted before plaster12. The plaster shall be applied in recommended thickness (generally 10–15 mm).Over-thick single coat application shall not be permitted.13. Proper curing shall be carried out for minimum 7 days after application.14. The contractor shall provide manufacturer’s guarantee / warranty certificate (minimum 5 years against debonding and cracks) wherever applicable.15. Any crack, peeling, hollowness or debonding observed during defect liability period shall be rectified by the contractor at his own cost including removal and re-plastering.16. Engineer-in-Charge reserves the right to: (i) Draw random samples from site (ii) Send for laboratory testing (iii) Reject the material if found sub-standard17. Measurement shall be taken for finished plastered surface only. No extra payment for wastage, thickness variation, scaffolding, curing or surface preparation shall be admissible.18. The material shall be of any one of the following approved makes or equivalent approved: Ultratech Readiplast / JK WallMaxX / Magicrete Ready-Mix Plaster / Weber Saint-Gobain / Birla Aeroco |
| 86 | M&L for preparation by suraface with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of premium intetrior acrylic emulsion paint by using brush roller over and including one coat of primer complete all as specified & directed by Engr-in-charge. |
| 87 | M&L for applying two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on newly plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 88 | M&L for applying three coats of white wash on newly plastered surface as on wall incl preparation etc. complete all as specified & directed by Engr-in-charge. |
| 89 | S & F framed work as in chowkhats of doors windows of angle iron, gates or other section with gusset plates, rails, braces etc confirming to Gde Fe 290-0 complete all as specified and directed by Engineer-in- Charge |
| 90 | S&F for 0.80 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required sheeting is welded to frame complete all as specified & directed. |
| 91 | S&F for powder coated aluminium frame for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. |
| 92 | S&F for powder coated anodised aluminium door shutters,, aluminium sections weighing exc 0.55 Kg/m including necessary necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges (03 Nos), anodised aluminium snap beading, screws, complete all as specified and directed by Engineer-in-Charge |
| 93 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 94 | S&F in repair drapery stainless steel curtain roads, standard quality, not less than 19/25 mm dia with heads, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixed on wall for doors and windows curtains, cutting as required length and fixing at site including fixing arrangements, rawl pluig, screws etc (size and dia of rods are directed by Engr-in-charge ) |
| 95 | S&F steel windows and ventilator double shutters one for gauzeing (Wiremesh) and one for glazing with side hung shutters including projecting / box / friction type hinges with as required steel handles and steel peg stays complete with gauzing and glazing bars including guard bars in between gauzing and glazing shutters dovetailed or weldwed etc and making good to disturbed portion match with existing surface drawing and design as specified and aproved by Engg -in-Charge. |
| 96 | Material and labour 20 mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required including dismantling old stone slab including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed by Engineer-in- charge. |
| 97 | M&L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 100mm thick, including watering and ramming to a true surface complete all as specified and directed by Engineer-in-Charge.NOTE :- Volume of hard core after consolidation will be measured and paid. |
| 98 | Material and labour for 100 mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor over rammed earth etc complete all as specified and as directed by Engineer-in-charge. |
| 99 | Material and labour for Machine cut kota stone slab flooring 20-25mm thick overcement screed base 15 mm thick in CM (1: 6 ) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-charge. |
| 100 | Material and labour for Machine cut kota stone slab flooring 20-25mm thick on vertical surfaces laid over and including 10 mm thick backing coat in cement morter (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-charge. |
| 101 | Material and labour for Non Skid ceramic Double charges coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement over and including 15mm thick screed base in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 102 | Material and labour for Non Skid ceramic Double charges coloured tiles (jointless) 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 103 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection/path finished even and smooth without using extra cement with and including 10 mm wide, 30 mm deep joints @ 3 m center to center, every turning point and filling the joints with bitumen and sand mixer complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | 4. M&L for 75 mm thick cement concrete type D-2 1:4:8 as in sub base for tiles all as Specified directed by Engr-in charge |
| 105 | 6. S&F Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and as directed. |
| 106 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified. directed by Engr-in-charge. |
| 107 | Providing and fixing aluminium framework for WPC wall panelling consisting of extruded aluminium sections of approved make and quality (minimum 1.2–1.6 mm thick), forming a rigid grid of vertical and horizontal members placed at 400–600 mm c/c spacing, including cutting, drilling, notching, and fixing in position. The framework shall be securely anchored to existing puff shelter wall/structure using suitable dash fasteners, anchor fasteners, self-tapping screws, etc., complete with necessary cleats, brackets, supports and accessories to ensure proper alignment, level, plumb, and rigidity of the framework.The work includes:All labour, material, T&P required for complete installationProvision of necessary supports and alignment adjustmentsMaking good of minor damages to adjoining surfacesEnsuring proper spacing and line for fixing of WPC panelsAll incidental works complete as directed by Engineer-in-ChargeMeasurement:The item shall be measured in kilograms (kg) based on actual weight of aluminium sections fixed at site.Rate shall include:Supply of aluminium sectionsFabrication and fixing in positionAll fasteners, brackets, cleats, and accessoriesTransportation, loading/unloadingComplete in all respects |
| 108 | Providing and fixing back support board for WPC wall panelling using approved quality WPC board of thickness 12 mm, fixed over aluminium framework to form a true, even, and rigid base surface for subsequent fixing of WPC panels, complete all as specified and as directed. The board shall be cut to required size and shape, and fixed with approved self-drilling/self-tapping screws at spacing not exceeding 300 mm c/c in both directions, including provision of suitable adhesives wherever required to ensure firm bonding and resistance against vibration in puff type shelters.The work includesCutting, drilling, notching, and fitting boards to suit site conditionsMaking necessary openings for electrical boxes, conduits, fixtures, etc.Proper alignment of joints, ensuring flush and even surface finishTight fixing to framework to avoid any deflection, warping, or vibrationFinishing edges neatly and making good disturbed surfacesCleaning of complete surface after installationComplete all as specified and as directed by Engineer-in-Charge.MeasurementThe item shall be measured in square metres (Sqm) of the actual area of back support board fixed in position.Rate shall includeSupply of WPC/PVC boards of specified thicknessAll cutting, handling, and wastageAll fasteners, screws, adhesives, and fixing accessoriesLabour, scaffolding, tools & plantsMaking cut-outs and finishingComplete installation in all respects |
| 109 | Providing and fixing premium quality WPC fluted wall panels of approved make, manufactured from wood polymer composite (WPC) material, having uniform fluted (grooved) surface texture, of size as per manufacturer’s standard (generally 150–200 mm width and up to 2.4–3.0 m length), and thickness not less than 25 mm , Panels shall be fixed using a combination of concealed clips, stainless steel screws, and high-strength adhesive, ensuring proper interlocking through tongue-and-groove system, maintaining uniform alignment, level, and plumb. The panels shall be of high-density, UV-stabilized, waterproof, termite-resistant, borer-proof and fire-retardant grade, with factory-finished surface such as wood grain / matte / laminated finish of approved shade and pattern.The work includes:Cutting panels to required size and shapeFixing panels in true line, level, and alignmentProper jointing with tongue & groove interlocking systemProviding uniform grooves/flutes without visible defectsMaking necessary cut-outs for electrical boxes, AC points, etc.Providing and fixing matching edge trims, corner profiles, end caps in WPC/PVC/aluminium as requiredFilling minor gaps and finishing edges neatlyCleaning and finishing complete surface after installationComplete all as specified and as directed by Engineer-in-Charge.MeasurementThe item shall be measured in square metres (Sqm) of finished surface area of WPC fluted panelling.💰 Rate shall includeSupply of premium WPC fluted panels All cutting, wastage, and handlingAll fixing accessories (clips, screws, adhesives, etc.) Edge trims, corner profiles, and finishing accessories Labour, scaffolding, tools & plantsMaking cut-outs and finishing Complete installation in all respects |
| 110 | S&F for powder coated aluminium frame for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of powder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. |
| 111 | Supply & fixing HDHMR Board , 18/19mm thick both side decorative laminated, density over 850kg/cum, having a class A fire rating, grade 2 quality, interior grade, including fixed with screws , L bend or necessary fittings to mount on wall or to frame work as in Kitchen cup board Shutter / shelves / cabinet etc complete all as per direction of Engineer- in-Charge |
| 112 | M & L for Mirror polishing on exiting marble/granite/Kota stone/Stone work where ever required to give high gloss finish complete all as specified and as directed by engineer-in-Charge. |
| 113 | S&F in repair Stainless Steel curtain roads, standard quality, not less than 19/25 mm dia with heads, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixed on wall for doors and windows curtains, cutting as required length and fixing at site including fixing arrangements, rawl pluig, screws etc (size and dia of rods are directed by Engr-in-charge ) including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engr-in-charge. |
| 114 | S&F in repair sheet glass 4 mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane including taking hacking out old broken glass from metal frame complete all as specified & directed by Engr-in-charge. |
| 115 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed by Engr-in-charge. |
| 116 | Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified & directed by Engr-in-charge.Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. |
| 117 | M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not other wise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge |
| 118 | M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge |
| 119 | Dismantling of existing Kota Stone Flooring including careful removal of slabs without undue breakage, cleaning of adhered mortar from underside, sorting of serviceable and unserviceable slabs, stacking of serviceable materials at site as directed, and disposal of unserviceable materials outside Defence land up to 50 m lead complete all as specified and directed by Engineer-in-Charge. |
| 120 | Re-fixing of serviceable Kota Stone Flooring slabs over a properly prepared base in cement mortar 1:4 (1 cement : 4 coarse sand) laid on average 20 mm thick screed bed, including necessary dressing, cutting, and laying to required line, level, camber and slope. Joints shall be finished with white/grey cement slurry mixed with approved pigment to match the shade of stone. The work further includes machine grinding (three-stage), honing, and mirror polishing using approved abrasive stones of progressively finer grades, including final buff polishing to achieve a smooth, even, and reflective finish. The rate shall include all labour, materials, T&P, curing, protection, and all leads & lifts complete in all respects as specified and directed by Engineer-in-Charge. |
| 121 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed. |
| 122 | M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed. |
| 123 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 124 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge. |
| 125 | M&L for providing and laying joint free premium quality double charged vitrified tiles 10 to 12 mm thick (rectangular/square), of approved make (Kajaria/Somany/Johnson or equivalent), of size as approved, on floor surfaces, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, laid with high performance polymer modified cement based tile adhesive conforming to IS 15477 (Type-2), over and including 15 mm thick screed/bedding layer in cement mortar 1:4, finished true to line, level and slope as required, with proper alignment and uniform joints, joints filled and pointed with high quality epoxy grout of approved shade, including cutting, surface preparation, curing, wastage, all leads and lifts complete, all as specified and directed by Engineer-in-Charge. |
| 126 | All as per Item no 123 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified & directed by Engr-in-charge. |
| 127 | M&L for joint free premium quality colour glazed ceramic wall tiles 8 to 10 mm thick (rectangular/square) of approved make (Kajaria/Somany/Johnson or equivalent), of size as approved, on vertical surfaces such as dado, skirting and walls etc., area of each tile exceeding 0.18 sqm but not exceeding 0.42 sqm, fixed with high strength polymer modified cement based tile adhesive conforming to IS 15477 (Type-2), suitable for heavy duty tiles, over and including 10 mm thick backing coat in cement mortar 1:4, finished true to line, level and plumb with proper alignment and uniform joints, joints filled and pointed with high performance epoxy grout of approved shade to match the colour of tiles, including necessary mechanical support wherever required for heavier tiles, surface preparation, curing, cutting, wastage, all leads and lifts complete, all as specified and directed by Engineer-in-Charge. |
| 128 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, laying pipe line, laying of cables or fixing poles and stays and struts etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge. |
| 129 | M&L PCC 1:3:6 type C2 nominal mix by using 40mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 130 | Material and labour for brick work with burnt bricks old size sub class \\"B\\" straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge. |
| 131 | M & L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) in coping for drain complete all as specified and as directed by Engr-in-Charge. |
| 132 | M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair even and smooth without using extra cemnt all as specified and directed. |
| 133 | M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge. |
| 134 | Providing and fixing 100 mm dia heavy duty PVC pipe (Class-4/SWR or approved equivalent) as weep holes through RCC/stone masonry toe wall/retaining wall, including cutting the pipe to required length, providing a slope of approximately 1(V):20(H) towards the exposed face, embedding and sealing the pipe in concrete/masonry, wrapping the inlet end with approved non-woven geotextile filter fabric to prevent clogging, providing 300 mm thick graded filter media (40 mm coarse aggregate) around the inlet where shown on drawing, making good the disturbed concrete/masonry surface complete in all respects as directed by Engineer-in-Charge. |
| 135 | Taking down and submitting old retrived material to AGE E/M Store yard carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces. |
| 136 | Taking down and submitting old retrived material to AGE E/M Store yard MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces. |
| 137 | Taking down and submitting old retrived material to AGE E/M Store yard sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces Please Enable Macros to View BoQ information |
| 138 | Taking down and submitting old retrived material to AGE E/M Store yard sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender