Tender For Provision Of Hardstanding And Car Parking Space At Cna(Dp) Complex And Certain Sanctioned Work In Can(Dp), Ssqag And Dlrl Under Age B/R-I Hyderabad
Tender Value
47.80 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
21 days left
EMD
94600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Hardstanding And Car Parking Space At Cna(Dp) Complex And Certain Sanctioned Work In Can(Dp), Ssqag And Dlrl Under Age B/R-I Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soi incl removing out side Govt land minimum 4km away all complete all as directed. |
| 2 | Rolling and consolidation of formation surfaces in cutting with power roller exceeding 8 tones & not exceeding 12 tones. |
| 3 | M&L for 100 mm thick hard core of broken stone boulder of gauge not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick, watered and rammed,compaction with roller to a true surface. |
| 4 | M&L cement concrete Type C2 1:3:6 (40mm graded aggregate) in foundation, filling and mass concrete including necessary formwork. |
| 5 | M&L for PU coated machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment (approved by GE) confirming to IS 15658-2006 of 80 mm thickness, M-40 grade including laid over 50mm thick sand cushion bed and preparing the surface to uniform level to receive tiles complete all as specified and as directed. |
| 6 | Providing and fixing precast cement concrete in Type B1, 1:2:4 (20mm graded aggregate) for kerb stone, rounded or chamfered on edge all as specified |
| 7 | Rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 and finished fair and even complete all as directed. |
| 8 | M&L cement concrete Type B2 1:2:4 (40mm graded aggregate) in foundation, filling and mass concrete and necessary formwork. |
| 9 | M&L for PCC (1:4:8) type D2, 100 mm thick (using 40 mm graded stone aggregate ) as in sub base. |
| 10 | Taking down cement plaster/cement lime plasters of bk work on any description including racking out of joints and cleaning dust etc |
| 11 | Demolition of brick work or stone masonry built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as spd & directed |
| 12 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spd & directed |
| 13 | M&L for brick work with sub class B Brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 Complete |
| 14 | Taking down steel tubing and connections for 15mm bore of pipe |
| 15 | Supply and Laying of CPVC Pipes 16mm dia & fittings on walls/ceiling or laying in floors complete all fiitings as specified |
| 16 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 17 | S&F in 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed. |
| 18 | S&F in repairs PVC connection of 15mm size,450mm long with PTMT nuts complete all as directed. |
| 19 | S&F in repairs 15mm dia stop valves /angle cock / concealed stop cock, fancy type, cast copper alloy, chromium plated screwed down high pressure with crown or capstan head screwed both ends for iron pipe complete all as directed. |
| 20 | S&F for 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 21 | M & L in repairs rotational moulded polyethylene water storage tanks , white coloure ,tripple layers, capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 22 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick/conc surfaces face of wall, finished even & fair |
| 23 | M&L for rendering 5mm thick in CM 1:4 on fair faces of ceiling surfaces . |
| 24 | M&L for preparation of New plastered surface of wall by complete removal & preparation of surface and applying two coat of oil bond distemper incl preparation of surfaces with Birla putty (3mm in two layers) over one coat primer etc all as specified and directed by Engr-in-Charge |
| 25 | M&L for preparation of New plastered surface of ceiling by complete removal & preparation of surface and applying two coat of oil bond distemper incl preparation of surfaces with 3mm wall care putty over one coat primer etc all as specified and directed by Engr-in-Charge |
| 26 | S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement |
| 27 | S&F 10 litres capacity PVC flushing cistern high/low level with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as directed. |
| 28 | M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchs dark shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cm 1:6 , dismantling floor and hearth or wall tiling including cement mortar bedding, removing unserviceable tiles |
| 29 | M & L glazed Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with existing floor tiles 10mm thick screed bed in cm 1:4., dismantling floor and hearth or wall tiling including cement mortar bedding, removing unserviceable tiles |
| 30 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) |
| 31 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for for partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) |
| 32 | Providing and fixing glazing in door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) as directed by Engineer-in-charge. |
| 33 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. Pre-laminated particle board with decorative lamination on both sides complete as per architectural drawings and directions of Engineer-in-charge. |
| 34 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness complete all as directed. |
| 35 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. Complete all as directed. |
| 36 | Providing and fixing 125mm long aluminium handles, ISI marked, powder coated as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as directed. |
| 37 | Providing and fixing 250mm long aluminium tower bolts, ISI marked, powder coated as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as directed. |
| 38 | Providing and fixing 300mm long aluminium sliding door bolts, ISI marked powder coated as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as directed. |
| 39 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications. |
| 40 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification. |
| 41 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm all as directed. |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,complete Size of Tile 600x600 mm. |
| 43 | Providing and laying Polished Granite stone flooring Polished Granite stone slab of all colour and texture except , Cherry/Ruby Red in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 44 | Supply and fixing of high - performance 600mm x 600mm modular carpet tiles of any colour / design as approved by Engr-in-Charge, featuring a durable 100% solution - dyed polypropylene loop pile for superior stain and wear resistance. The installation uses a specialized releasable pressure - sensitive adhesive,allowing for easy individual tile replacement without damaging the subfloor.Scope of work includes surface preparation, precision perimeter cutting, and layout alignment in either monolithic or quarter - turn patterns.All complete as specified and as directed by the Engineer-in-Charge. |
| 45 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 46 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 47 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 48 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. Size of fastner 10 x 160 mm. |
| 49 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works incl preparation of surface. |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade of One or more coats on old work With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works incl preparation of surface. |
| 51 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2mm thick flat. |
| 52 | Providing and laying vitrified tile polished finish of size Size of Tile Size of Tile 600x600 mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 53 | Material & labour 2mm thick PVC flooring including fixing with adhesive complete all as specified and directed. |
| 54 | S&F Solid PVC Wall Lining(Wall paneling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and direction of Engineer-in-charge. |
| 55 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification.Note : S.NO.01 to 11 all works are carried out at 2nd storey (G+2) |
| 56 | Dismantling the exisitng switch board at site and refixing the switch board without disturbing the connections all as specified and directed by Engr-in-charge. |
| 57 | Supply and fix 30x15 mm casing and capping and reroute the existing cable/wires present in pvc through casing and capping all as specified and directed by Engr-in-charge. |
| 58 | Supply and fix modular plate along with cover up to 12 way. |
| 59 | Supply & Fixing Modular switch, one module, one way 6 Amp, 240V, complete all as specified and directed. |
| 60 | Supply & Fixing Modular switch 16A, one way, one module, 240 Volts, complete all as specified and directed. |
| 61 | Supply & Fixing Modular step type, electronic fan regulator, two module, 240 Volts, complete all as specified and directed. |
| 62 | Supply & Fixing modular socket one way 6 Amps, 2/3 pin combination 2 module, complete all as specified and directed. |
| 63 | Supply & Fixing modular socket, 6A/16A - 2 /3 pin combination 2 module, complete all as specified and directed. |
| 64 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete |
| 65 | M&L sub main wiring with PVC insulated FRLS grade cable LT 1100 Volts grade PVC insulated unsheathed, multistranded with stranded copper conductor drawn in & including concealed type medium grade PVC conduit not less than 20mm ISI marked with all accessories and incl cuttting and chasing of any type of wall and making good to match with the existing surfaces alongwith one contineous earth wire and connected to common earth complete all as specified for following sizes of cable :- |
| 66 | 2 x 2.5 sq mm with one continous earth wire of size 2.5 sq mmNote : 2 runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC conduit will be measured as one meter. |
| 67 | 2 x 4 sq mm with one continous earth wire of size 4.0 sq mmNote : 2 runs of 4 sq mm cable and one run of 4.0 sq mm earth wire and PVC conduit will be measured as one meter. |
| 68 | 2 x 6 sq mm with one continous earth wire of size 6.0 sq mmNote : 2 runs of 6 sq mm cable and one run of 6 sq mm earth wire and and PVC conduit will be measured as one meter. |
| 69 | 4 x 4 sq mm with two continous earth wire of size 4.0 sq mmNote : 4 runs of 4 sq mm cable and two runs of 4.0 sq mm earth wire and PVC conduit will be measured as one meter. |
| 70 | 4 x 6 sq mm with two continous earth wire of size 6.0 sq mmNote : 4 runs of 6 sq mm cable and two runs of 6.0 sq mm earth wire and PVC conduit will be measured as one meter. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender