Tender For Addition/Alteration And Special Repairs To The Entrance Lobby At Dmde Main Buildiung
Tender Value
47.80 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
8 days left
EMD
95600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration And Special Repairs To The Entrance Lobby At Dmde Main Buildiung
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells,cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil and removing excavtaed material outside MOD land complete all as specified and as directed. |
| 2 | Material and labour providing cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete etc all as specified and as directed. |
| 3 | Material and labour providing reinforced Cement Concrete M-30 (20mm graded curshed stone aggregate) as in foundations, footings, foundation beams; plinth beams; Beam, coloums, Pillers and bases for columns, etc complete all as specified and as directed. |
| 4 | Material and labour providing reinforced Cement Concrete Type M-30 (using 20 mm graded stone aggregate) as in slabs supported on walls, roofs, landings, waste slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 5 | Material and labour for use & waste of form work to Formwork to sides of concrete foundations, footings, bases of columns, and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed |
| 6 | Material and labour for use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. for rough finished surfaces of concrete, complete all as specified and as directed |
| 7 | Material and labour for use & waste of form work to soffits of suspended slabs such as roof slab,floor slab for rough finished surfaces of concrete complete all as specified and as directed. |
| 8 | Supply and fixing Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed. |
| 9 | M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified. |
| 10 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 11 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering |
| 12 | Supply and Laying natural grass carpet (Selection Number 1 Grass) including good and fine red earch/soil layer of 100 mm thick and watering and maintenance of Lawn for 03 Months or more till the grass forms a thick lown free from weeds and fit for mowing and Including (Coco pet, Neem cake & DDT powder) as per requirment as directed. |
| 13 | M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth. |
| 14 | M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of Premium emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Note:- (i)The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage.. |
| 15 | M&L for light/Dark coloured full body double vitrified tiles (Large Slab) of any design and pattern, area of each tiles exceeding 0.64 sqm but not exceeding 1.62 sqm, 9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed |
| 16 | Ditto as item no 15 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 and including dismantling existing tile work with plaster complete all as specified and directed. |
| 17 | Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick tinted float glass |
| 18 | Providing and fixing Material & Labor (M&L) for a multi-tiered false ceiling system, integrated fixtures, and surface finishes, executedstrictly as follows: (i) Gypsum Board False Ceiling: Main central false ceiling and drop-panels fabricated using minimum 12.5mm thick premium tapered-edge Gypsum Boards conforming to IS 2095, securely screwed to an independent, rigid galvanized iron (GI) metal framework consisting of perimeter channels, ceiling sections, and intermediate channels suspended via anchor fasteners. (ii) PVC Wooden Ceiling Section: Premium PVC false ceiling planks in a textured wooden finish, fixed to an independent GI metal framework, complete with interlocking joints, level alignment, and edge trims flanking the main central gypsum zone. (iii) Ceiling Jointing & Finishes: All gypsum board joints to be seamlessly taped and finished with specialized jointing compound and fiber tape, followed by a uniform application of Texture Putty Finish over the central zone, and smooth Matt Finish Paint over the surrounding perimeter drop borders. (iv) Electrical & Lighting Fixtures: Providing and fixing recessed COB (Chip-on-Board) downlights in designated layouts across both the wooden PVC sections and the central gypsum zone, including all concealed conduits, fire-retardant wiring, junction boxes, and micro-switches. (v) Mechanical & AC Integration: Incorporating precise cutouts, structural reinforcing frames, and edge finishing for the central Air Conditioning (AC) cassette or vent unit without compromising the structural integrity of the ceiling grid. Note : All work to be executed complete in all respects including precise leveling, framework suspension, cutout routing for AC/lighting, joint masking, finishing, and cleanup, as per architectural layouts and engineer instructions. |
| 19 | S&F Stainless steel railing made out of 304 grade steel with following specifications : |
| 20 | (a) Stainless steel hand rail of 50mm dia including bending at turns,welding and polishing complete(b) Stainless steel cross bars three nos 20mm dia fixed parallel to hand rail with balusters by welding.The ends of cross bars fixed with round bar spherical end cap including welding and polishing complete.(c) Stainless steel balusters of 900mm height and 38mm diameter pipes fixed at 90cm c/c.One end welded with hand rail and other fixed with step using anchorage clamps and dash fasteners etc as required at site to fix in position complete.(d) Stainless steel newel post 75mm dia with spherical cap fixed at starting and terminal point of railing.Newel post shall be fixed with brackets and dash fasteners etc complete.(e) Fixing of toughened glass 8mm thick clear/Day&Night glass using SS studs(f) Taking down old mild steel railing and making good the disturbed surfaces matching with existing surfaces. |
| 21 | S&F Multicolour double layered black out fabric roller zebra blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed .Make: Vista/Amar |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in excavated soil |
| 23 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed |
| 24 | M&L 18 mm thick granite work as in pillars, display boards, wall cladding and like incl 15 mm thick screed bedding in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges complete, all as specified and directed. |
| 25 | S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab, beam or parapet etc and making good with cement mortar 1:4 complete all as specified. |
| 26 | S&F 150mm PVC (SWR) bends any radius complete all as directed |
| 27 | Providing and fixing Material & Labor (M&L) for a high-strength, heavy-duty Automatic Glass Sensor Door with an 2400 mm opening a double-leaf sliding toughened glass Door and two fixed panels an mehanical highend overhead infrared motion sensor system with micro-processor controlled German/Japanese gear motor and Weight Capacity Supports up to 90 kg to 140 kg per active leaf and Opening/Closing Speed Adjustable from 100 to 500 mm/sec and Hold-open Time 1 to 20 seconds (adjustable) and Sensor Type Active infrared motion and presence sensors Safety Reversal Automatic open-back/reversal mechanism upon detecting an obstacle or resistance.Modes Automatic, permanent open, partial opening (for climate control), and locked mode and architectural toughened glass panel system featuring custom logo engraving, executed strictly as follows:Toughened Glass Panel: Minimum 12mm thick clear, distortion-free architectural toughened (tempered) safety glass, manufactured to comply with international safety standards, featuring fully polished, chamfered, and blunt edges.Custom Logo Engraving: Execution of a precision-crafted company logo onto the designated face of the glass panel using high-fidelity computer-controlled (CNC) deep mechanical sandblasting or chemical frosting techniques, ensuring crisp lines, uniform depth, and exact adherence to approved vector graphics.Hardware & Structural Fixing: Heavy-duty, anti-corrosive stainless steel (Grade SS 304/316) hardware accessories Gaskets & Shock Absorption: High-durability, weather-resistant translucent silicone or EPDM rubber gaskets inserted at all glass-to-metal and glass-to-glass contact interfaces to ensure acoustic isolation, shock absorption, and structural stability.All work to be executed complete in all respects including precise site measurements, template routing for hardware, professional handling and lifting, flawless alignment, and final residue-free surface cleaning, as per architectural details and directions of the Engineer-in-Charge.Make : Dorma or Equivalent |
| 28 | Providing and fixing Material & Labor (M&L) for interior decorative wall paneling, framing, and finishes across Sectional Elevations Wall BB', Wall CC', and Wall DD' (as per drawings) at the entrance lobby, strictly adhering to the following structural and decorative layers: (i) Substructure & Paneling Base: 18mm thick Plywood, 9-layer grade BWR (Boiling Water Resistant) type BB, and 30mm thick Plywood / Wooden paneling bases, securely fixed with screws to a robust, treated timber framework backend where required for overlapping, structural framing, and projection layouts (ii) Laminate Finishes: M&L 0.90mm thick decorative laminates fixed with approved high-strength adhesive as per manufacturer's instructions, including premium Marble Finish Laminate, Dark Italian Marble Finish Laminate, and matching approved decorative surface finishes, colors, and veiningpatterns. (iii) Feature Wooden Louvers & Grooves: Fabricating and fixing ½\\" Vertical Wooden Louvers and custom MDF vertical panels detailed with precise 2\\" spacing grooves, finished seamlessly as specified. (iv) Wall Substrates & Texture Putty: Preparing wall surfaces to receive multi-layer applications including Texture Putty Wall Finish for distinct architectural zoning, and premium, smooth Matt Finish Wall Paint over required undercoats. (v) Integration with Existing Openings: Executing all paneling and painting work flush and complete around existing structural borders, integrated Screen Displays, and designated Clear Glass and Board Panel openings as per site measurements. Note : All work to be executed complete inall respects including joints, alignment and cleaning, as per drawings and direction of the consultant (Architect)/Engineer-in-Charge. |
| 29 | Providing and fixing Material & Labor (M&L) for exterior-grade, heavy-duty, weatherproof architectural paneling to 4 structural columns and 3 horizontal beams faces on the outside of the building, executed strictly as follows: (i) ACP Panels: Minimum 4.0mm thick exterior-grade Aluminium Composite Panels (ACP) with a 0.50mm thick non-toxic, fire-retardant LDPE/mineral core and structural skin, coated with a high-durability PVDF (Fluorocarbon) finish resistant to severe weather, UV radiation, chalking, and environmental fading. (ii) Texture & Aesthetic Matching: The surface finish, gloss level, pattern, and color selection of the ACP panels must precisely match the existing building's structural texture and surrounding architecturalfacades, to be approved by the Engineer-in-Charge before installation.Substructure Framework: Heavyduty, anti-corrosive galvanized iron (GI) or structural aluminium alloy framework runners, brackets, and cleats, securely anchored to the concrete/masonry column and beam faces using stainless steelexpansion fasteners and anchor bolts. (iii) Weatherproofing & Sealing: All panel joints, grooves, and junctions to be sealed and made completely watertight using structuralgrade, non-staining, weatherproofing silicone sealant over approved closed-cell PE backing rods, applied as per the manufacturer's specialized instructions. (iv) Execution & Completion: Work includes structural grid alignment, precise V-groove routing, neat folding of panel edges, corner fabrication, scaffolding/cradle hoisting, protection film removal, and final surface cleanup.Note : All work to be executed complete in all respects, fully leveled, plumb, and structurally sound, asper architectural drawings and engineering directions. |
| 30 | Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 31 | S&F in repairs mechamically oparated steel rolling shutters 1.25mm thickness of laths , without ball bearing as specified including top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete |
| 32 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 33 | M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- |
| 34 | One light/ Fan/ Bell point controlled by one way modular switch 6 Amps |
| 35 | One 3 pin 6 Amps switch socket outlet point on independent board |
| 36 | One 3 pin socket outlet 6 Amps on the same board with other switches. |
| 37 | M&L for point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/Ceiling and Terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. |
| 38 | S/F modular switch one way 6 amps 1 module |
| 39 | S/F modular switch one way 16 amps 1 module |
| 40 | S/F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as directed by Engineer-in-Charge. |
| 41 | S/F modular socket out let 6A/16A - 2/3 pin combined 2 module, multipurpose type complete all as directed by Engineer-in-Charge. |
| 42 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete |
| 43 | Supply and fixing LED lights fitting 1x 20W, 220V,AC batten type fittings with extruded aluminium housing PC diffuser and integrated electronic driver connector block etc and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 44 | S & F moveble COB light, recessed LED ceiling light for indoor lighting, warm white colour aluminium body 12 W with all connected items required as per site and all as specified & directed by Engr-in-Charge |
| 45 | S & F LED 10W flex spot light black,warm white 3000k adjustable spot light, indoor focus light with all connected items required as per site and all as specified & directed by Engr-in-Charge |
| 46 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete |
| 47 | Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 48 | S&F MCB single pole 5 Amp to 40 Amps complete all as directed by Engr-in-charge |
| 49 | S&F MCB SPN 240 Volts 63 Amps complete |
| 50 | M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete all as directed by Eng-in-charge |
| 51 | S&F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) |
| 52 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. |
| 53 | Supply and fixing wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as directed by Engineer - in - charge. Make:- Bajaj/Havells/Crompton/Usha |
| 54 | M&L for fabrication, supply, fixing of remote control motor for existing roller shutter with automatic lele stopping switch button, I phase and also provision of power chain crank in absence of power with lifting capacity of motor is 1Mton with electric connection complete |
| 55 | Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.Make :Philips, Cat No : 30575 (Comet) or equivalent in Havells, Cat No : LHDL06160099 (CITY 3). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender