Tender For Repairs To Toilet, Bathroom, Sanitary Fittings & Other Connected B/R Works Of Md & Otm Accn At Mil Stn Kasauli Under Ge Kasauli.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
16 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Toilet, Bathroom, Sanitary Fittings & Other Connected B/R Works Of Md & Otm Accn At Mil Stn Kasauli Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 3 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 4 | Supply and fixing 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs, walls etc. with grade of zink coating 275, complete all as specified and directed. |
| 5 | S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing fixed with self tapping screws as specified. |
| 6 | S&F for Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed. |
| 7 | Dismantling timber scantlings in unframed works 40sq. cm and over in section, in any position complete all as specified. |
| 8 | M & L 2nd class HW clean Sawn timber as in scantling/posts complete all as specified. |
| 9 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified. |
| 10 | M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed |
| 11 | Material and labour for walling of random rubble, uncoursed stone masonry,well bonded, bedded and solidly hearted, built in cement mortar 1:4 but except stone complete all as specified and as directed. Note- The serviceable stones obtained from Serial item No- 09 will be used after removing motar, cleaning with water, etc.) |
| 12 | Material and labour for brick work with sub class ‘B’ bricks burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified |
| 13 | M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of new brick work or concrete surfaces incl finishing surface even and fair without using extra cement complete all as specified and directed |
| 14 | M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 15 | S & F coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified. |
| 16 | M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and as directed . |
| 17 | M&L Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed. |
| 18 | Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed. |
| 19 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified. |
| 20 | Dismantling of stone slabs and PCC tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar and removing the rubbish outside of MoD land, complete all as specified and directed as specified and directed. |
| 21 | M & L Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified. |
| 22 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade and incl laid over 50 mm thick sand cushioning .all as specified and as directed |
| 23 | Demolition of Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified. |
| 24 | M&L PCC 100 mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed. |
| 25 | M&L 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement all as specified. |
| 26 | Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified. |
| 27 | Material and Labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, all as specified. Note : (Reinforce bar paid and measured separately) |
| 28 | Providing pre cast cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match all as specified . |
| 29 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete. |
| 30 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed . |
| 31 | Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 32 | M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed . |
| 33 | M&L for two coat cement plaster (up to 12m height including necessary scaffolding) ,on brick/concrete surace of wall first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement. (WPC will be paid seperately under respective item) |
| 34 | Supply only WPC |
| 35 | Material and Labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified |
| 36 | M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed. |
| 37 | M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer. |
| 38 | Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 39 | Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified. |
| 40 | Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified. |
| 41 | Taking down shutter of any description n. exc 1.0 sq.m each complete all as specified. |
| 42 | Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed . |
| 43 | Supplied and Fixed IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 44 | Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed . |
| 45 | S&F Flush shutters 30 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 46 | Supply and Fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified. |
| 47 | Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed . |
| 48 | Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 49 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification. |
| 50 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge. |
| 51 | Anodised aluminium frame powder coated(50micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 52 | S & F anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges anodised aluminum snap beading screws etc, complete all as specified. (Note : S&F of Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately under this Sch). |
| 53 | S&F anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately ) |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified |
| 55 | S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 56 | S & F in repair Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed |
| 57 | Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified |
| 58 | M&L for 9mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination ,fixed with aluminium frame work |
| 59 | S&F sheet glass 5.5 mm thick glass plain sheet ordinary quality in square exc 0.5 sq. m in each pane to be fixed in aluminum frame all as specified. |
| 60 | S&F in repair 3mm Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified. |
| 61 | S & F Mortice lock, 4 levers, brass, vertical type of size 100mm, fixed in repair all as specifieed and directed. |
| 62 | Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 63 | Supply and fixing for stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed. |
| 64 | Supply and Fixing 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 and as directed . |
| 65 | Supply and Fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed . |
| 66 | S&F 100mm Aluminium handles, cast type, anodised, fixed complete all as specified. |
| 67 | Supply and Fixing 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 and as directed . |
| 68 | S & F 4 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified. |
| 69 | Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets, complete all as specified and directed. |
| 70 | S&F Plywood 6mm thick, grade BWR, type BB, fixed with screws to timber frame work in ceiling complete all as specified and as directed. |
| 71 | M&L for Plain fillets 2nd class hard wood exe 13 sqcm and not exe. 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads fixed in repair including dismantling timber scantlings 40 sqcm and under in section, in ceiling complete all as specified and directed. |
| 72 | M&L for Plain fillets 2nd class hard wood exe 6 sqcm and not exe. 13 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads fixed in repair complete all as specified and directed. |
| 73 | Supply and Fixing galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed . |
| 74 | S&F of 18/19 mm thick block boards / veneered particle boards, grade 1 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work. |
| 75 | S & F in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified. |
| 76 | M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified |
| 77 | M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified |
| 78 | S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed . |
| 79 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified |
| 80 | S & F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed . |
| 81 | S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 82 | M&L Cutting holes into or through walls built in stone walls built in cement mortar or cement lime mortar and walls of cement concrete.Superficial area n.exc 150 Sqcm,complete all as specified. |
| 83 | S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch orCapsten headed screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms). |
| 84 | S&F in repair 15mm bore angle cock CP fancy type with Capsten headed, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms). |
| 85 | S & F in repairs Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified. |
| 86 | S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed . |
| 87 | S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed . |
| 88 | Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed. |
| 89 | Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed. |
| 90 | M&L for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed. |
| 91 | M&L for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed. |
| 92 | S & F 15 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified. |
| 93 | Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified. |
| 94 | Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified. |
| 95 | M & L for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as specified and directed . |
| 96 | Refixing15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified. |
| 97 | M & L for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed . |
| 98 | M & L in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified |
| 99 | S & F in repair sheet glass self asembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail complete all as specified. |
| 100 | S & F 600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified. |
| 101 | S & F as in repair Vitreous China wash basin, white, flat back, size 630x450mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed . |
| 102 | S&F in repair of Mixer 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 103 | S&F in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 104 | S & F in repair of 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified. |
| 105 | Supply and fixing in repair vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding fixing bolts, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 106 | S&F of Vitreous china squatting pan, \\"Orissa pattern\\" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified |
| 107 | S & F as in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed . |
| 108 | S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). Complete all as specified and directed. |
| 109 | S & F 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
| 110 | M&L for preparation of old plastered or unplastered surfaces of walls and applying two coat of oil bond distemper of any approved tint after complete removal of existing surface complete all as specified. |
| 111 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two coat of cement base paint of any approved tint after complete removal of existing surface complete all as specified. |
| 112 | M&L 3mm thick wall care putty on wall complete all as specified & directed. |
| 113 | M & L for preparation of old painted wooden surfaces of any description position and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) all as specified and as directed. |
| 114 | M&L for toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 115 | Amount of credit of Rs.232638.25 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender