Tender For Provn Of 02 X Aluminium Partitioning And Construction Of Generator Shed At Comn Complex At Sila Grn And Provn Of Hard Standing Shed For Generators (26X13 Feet) At Field Repair Increment Of 63 repair renovation Bn Kalakot Under Ge Nagrota
Tender Value
8.90 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
19 days left
EMD
17800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 02 X Aluminium Partitioning And Construction Of Generator Shed At Comn Complex At Sila Grn And Provn Of Hard Standing Shed For Generators (26X13 Feet) At Field Repair Increment Of 63 repair renovation Bn Kalakot Under Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8 Type D2( using 40mm graded crushed stone aggregate), as in fdn filling and mass concrete complete all as specified and directed. |
| 3 | S&F for Rolled sections as in post, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde- E-250 quality-B) complete all as specified and directed. |
| 4 | S&F for Roof trusses (framed) trussed, purlin, crane gantries, plate, rail and fastening and heavy brackets framing ( Beams, Tee, angle, channel or flat section) including distance pieces, cleat etc. confirming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed. |
| 5 | M&L for two coat of synthetic enamel paint to steel surfaces over a coat of red oxide primer including preparation of surfaces over 10 CM width or girth, not other wise described complete all as specified and directed. |
| 6 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 7 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | Supply & Fixing Powder coated Anodised aluminium frame (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 9 | Supply & Fixing Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 10 | Supply & Fixing 5.5mm thick plain sheet glass as in window and door shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 11 | Supply & Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 12 | Supply & Fixing 12 mm Veneered decorative plywood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and directed. |
| 13 | S & F in repairs cast aluminium (extruded section body) door closer by hydraulically regulated, designation No.3 universal type, suitable for door shutters up to 851mm to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as specified and directed. |
| 14 | Excavation in trenches n exc. 1.5m wide and n exc 1.5m wide and n exc 1.5m deep and getting out in any type of soil complete all as specified and directed. |
| 15 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks (best quality) built in CM 1:6 complete all as specified and directed. |
| 16 | M&L for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement with integral water proofing compound and two coats of cement base paint over one coat primer complete all as specified and directed. |
| 17 | M&L for Hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surface complete all as specified and directed. |
| 18 | M&L Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate, 100mm thick as in sub base of floors complete all as specified and directed. |
| 19 | M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) 40mm thick as in concrete floor finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 20 | Removing excavated material (soil) not exceeding 50m and spreading where directed at level of n exc. 1.5m above the starting point complete all as specified and directed. |
| 21 | Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed. |
| 22 | Surface excavation n exc. (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 23 | Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed. |
| 24 | M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed. |
| 25 | M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, kerbs including necessary formwork etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender