Tender For Repairs To Drain, Plinth Protection Hardstanding And Associated Works At Phase-Iii (U And L Dahung, Dum Dum Nalla, Mh, Mes Offices And Messes) Of Age B/R Under Ge Tenga
Tender Value
44 Crore
Estimated cost
Bid Submission
21 Oct 2026
20 days left
EMD
88 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Drain, Plinth Protection Hardstanding And Associated Works At Phase-Iii (U And L Dahung, Dum Dum Nalla, Mh, Mes Offices And Messes) Of Age B/R Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description including (below or above ground level), not exc. 15 cm thickness, including removal of rubbish from site, complete all as specified and directed. |
| 2 | M&L for cement concrete type C-1, 1:3:6 (using 20mm graded agg) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement complete all as specified and directed. |
| 3 | Demolition of Stone slabs and tiles of any description or thicknesslaid bedded and pointed in any mortar in floors, aprons etc. |
| 4 | M&L for chequered cement concrete tile 20cmx20cmx25mm/30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed. |
| 5 | M&L for 75 mm thick PCC 1:4:8 type D-2 (40 mm graded aggregate) as in subbase to flooring complete all as specified and as diretcted. |
| 6 | M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as diretcted. |
| 7 | M&L for PCC 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates for hardstanding, mass concrete etc complete all as specified and directed. |
| 8 | M&L for Machine pressed precast concrete interlocking paver block any shape and size conferming to IS 15658-2006 of 80 mm thick M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 9 | M&L for sand filling under floors as in cushioning to interlocking paver block, complete all as specified and directed. |
| 10 | S&F for Non slip heavy duty outdoor parking tiles 300mm x 300mm x 08mm to 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 11 | M&L for cement concrete Type B-0 using 12.5mm graded stone aggregate (Nominal mix in 1:2:4) in copings, benching and the like including weathering slightly rounded or chamfered angles as directed including necessary form work and finishig all exposed surfaces complete all as specified and directed. |
| 12 | Demolition of brick work or stone, precast cement concrete block / boulder masonry, built in cement mortar 1:6 including all quoined, arches, pillars & for ashlar facings.dressed stone work complete all as specified and directed. |
| 13 | Allas per srl item No. 12 here- in-before but pre-cast concrete block walling complete all as specified and as directed. |
| 14 | M&L PCC 1:3:6 type C-1 (using 20mm graded aggr) as in surface channels & drains, benching of manholes complete all as spd and directed. |
| 15 | M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stop ends all as specified and directed. |
| 16 | As per item no 15, Add or deduct for 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete complete as specified and directed |
| 17 | M&L for Providing precast cement concrete solid building blocks exc 10cm in width of type C1 (1:3:6) (20mm graded stone aggregates) and setting in cement mortar 1:6, in walls, complete all as specified and directed. |
| 18 | M&L for walling Random Rubble stone masonary uncoursed in CM 1:6 complete all as specified and directed. |
| 19 | All as per item No. 18 hereinbefore but except stone all as specified and directed. Note:- stone obtained from item No.12 shall be reused. |
| 20 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 21 | M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 22 | M&L for Rendering 20 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even (without using extra lime or cement) complete all as specified and directed. |
| 23 | M&L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 24 | M&L for Hardcore of gauge n exc. 63 mm broken stone or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all specified and directed |
| 25 | Dismantling of cast iron or reinforced concrete drain pipes of 300mm dia, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 26 | Dismantling of cast iron or reinforced concrete drain pipes of 450mm dia, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 27 | M&L for Reinforced concrete pipes, class NP2, 300mm dia laid and jointed complete with collars complete all specified and directed. |
| 28 | M&L for Reinforced concrete pipes, class NP2, 450mm dia laid and jointed complete with collars complete all specified and directed. |
| 29 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 300 mm bore pipe complete all as specified and directed |
| 30 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 450 mm bore pipe complete all as specified and directed |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 32 | S&F Mild steel framed work such as grills, gratings, as for ornamental and intricate design gates side hung, including pintle hinges, stops, hand-made sliding bolts, etc confirming to Fe-290, Gde-E-165, complete all as specified and directed. . |
| 33 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including rendering 10mm thick in CM (1:4) etc complete all as specified and directed. |
| 34 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate demolitions) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 35 | M&L for Reinforced cement concrete type B1, 1:2:4 using 20 mm graded aggregate as in foundation, including rafts, footings,foundation beams, base for columns etc, basement slabs, under-reamed piles and mass concrete complete, all as specified and directed. |
| 36 | M&L for Reinforced cement concrete type B1, 1:2:4 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete, all as specified and directed. |
| 37 | M&L for RCC 1:2:4 type B-1 (20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 38 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) in foundation, plinth beams and similar work vertical or to batter for rough finished surfaces on flat surfaces of concrete all as specified and directed. |
| 39 | Use and waste of Form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete all as specified and directed. |
| 40 | Use and waste of form work to sides and soffits of beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves etc in fair finished surface complete all as specified and as directed. |
| 41 | Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as directed. |
| 42 | M & L for Mild steel TMT steel bar 10mm dia & over cut to length bent to shape required and binding wire with and including MS wire annealed not less than 0.9mm dia as in reinforcement all as specified and directed. |
| 43 | M&L for MS TMT bars 05mm and over, upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender