Tender For Repair To Certain Internal Roads, Side Berms And Road Furniture At Area-Iii Under Age B/R-Ii K Tee
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Internal Roads, Side Berms And Road Furniture At Area-Iii Under Age B/R-Ii K Tee
BOQ
| Sl. No. | Item Description |
| 1 | Preparing existing black top by brushing with wire brush, for removing caked mud, etc sweeping with broom & finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly tack coat of paving bitumen VG-10 @ 5Kg per 10 Sqm. Complete all as specified and directed.. |
| 2 | M&L for Premix bituminous, macadam (consolidated thickness 75mm or more consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required all as specified and directed. |
| 3 | M&L for Premix bituminous, macadam (consolidated thickness 75mm or less consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required all as specified and directed. |
| 4 | M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity complete all as specified and directed. |
| 5 | M&L for prepration of road surfces and applying thermoplastic reflective paint marking 2.5 mm thick single coat as in lines, dashes, arrows, letters, zebra crossing of 100/150 mm wide using HOT MARK thermoplastic modern propelled road marking machine incl all necessary ingredients such as binder, glass beads . titanium dioxide calcium carbonate inter fillers thermoplastic requiredments for glass beads shall be table No 8004 of MORTH speccification incl spraying of glass beads etc.th etc complete all as per manufactures instruction and as directed. NOTE: Application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint. |
| 6 | S&F in repair solar road studs of size 125mm x 125mm x 20mm, aluminium alloy & polycarbonate stud (Red/yellow LEDs) 3+3 LED's with shank in tough aluminium diecast body with MS zinc coated nails of size 12mm dia and 120mm long, complete as per MORTH/IRC specifications |
| 7 | S&Fin repair aluminium rod stud two way reflective dimension 110x128x30 mm aluminium alloy body reflective panel amber/ red or weight 530 gms complete aluminium coated of approved fixed with epoxy |
| 8 | Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft and loose soil. |
| 9 | M&L for150 mm ( compacted thickness) of Moorum spread rolled and consolidating by power roller to gradient and camber as required as in berms. |
| 10 | Demolition of cement concrete any description and in any position and removal of demolished material out side of defence land not otherwise specifically provided for complete all as specified and directed. |
| 11 | M&L hardcore of gauge n.exc. 63mm of broken stone boulders n exc 100 mm deposited, spread and levelled in layers watered and rammed to a true surface for hard standing |
| 12 | M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed. |
| 13 | M & L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15 cm thick complete including watering and consolidation complete all as specified and as directed. |
| 14 | M & L of Machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade ® with Grey cement and pigment complete all as specified and as directed. |
| 15 | M&L cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in coping complete all as specifed and directed. |
| 16 | M&L for providing precast kerb stone as specified and directed |
| 17 | Demolition of brick work built in cement mortar incl all quions, arches, pillar but excluding ashalar facing etc all as specified and directed |
| 18 | Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 19 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement complete all as specifed and directed. |
| 20 | M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specifed and directed. |
| 21 | S&F solar road delinator 6 LEDs of colour red/yellow housed in plastic body, LEDs,solar cells,battery and light sensorwell procted inside,polycarbonate sheet,device protected with powder coated wire mesh,cage , system mounted over 47mm dia steel tube ,powder coated of length 600mm having sheet foot for firm grip to ground. delinators to have additional reflective bands. system workable for 2-3 days(nights)after full chargr for 8-10 hours. NOTE: Delinators with extra height can also be made e.g. of height 750,900 or 1000mm |
| 22 | S&F plastic speed breaker 250 mm width including all accessories to fix properly on existing or new road surface of any tpye complete all as specified and directed. |
| 23 | M & L for preparation of new concrete surface and applyning two coats of cement paint complete all as specifed and directed. |
| 24 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 25 | M&L cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as in foundation/ filling complete all as specifed and directed. |
| 26 | M&L for sign board made of 2mm thick SS sheet followed by Aluminium composite reflective paint of specified colour/ tint on both faces of SS sheet duly marked with letters or numbers or signs marked/ written as per direction of GE including fixing of board at any height as directed incl necessary welding, bolting work complete all as specified and directed. |
| 27 | NOTE : SCHEDULE OF CREDIT (Amount on page No 27 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender