Tender For Certain Misc B/R Repair To Mh And annual maintenance contract Unit Under Age B/R-I Of Ge (East) Jrc (Tender Id No 2026_Mes_791774_1)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Misc B/R Repair To Mh And annual maintenance contract Unit Under Age B/R-I Of Ge (East) Jrc (Tender Id No 2026_Mes_791774_1)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos Cement (Corrugated, semi corrugated, etc) sheets/PVC sheets or any type in roof covering, complete all as specified and as directed. |
| 2 | M&L for pre-painted galvalume aluminium zinc cating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strenght of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screwa, complete all, complete all as specified and as directed |
| 3 | M&L for pre-painted galvalume aluminium zinc cating GI based Plain steel sheet 0.50mm thick of an colour having tensil strength of 550Mpa as in Roof ridge, fixed with self tapping screws, complete all, complete all as specified and as directed |
| 4 | Dismantling wall and ceiling boards fibre, pulp, insulations etc or insulation boards/slabs/blankets any thickness incl cover fillets, complete all as specified and as directed. |
| 5 | S & F of Providing and fixing HPSC PVC laminated one side Board 6mm thick in ceiling fixed with as per manufacturers instructions purpose, 60 X 60 cm size fixed with powder coated Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including necessary GI wire hangers 2 mm dia for securing frame work to ceiling, and also including necessary notching, complete all as specified and as directed. |
| 6 | M&L for providing and fixing 12mm thick Gypsum board in ceilling fixed with screw as per manufacturer's instructions complete all specified and as directed. |
| 7 | M&L for PVC solid wall panelling of 5mm thick any colour/design approved by engr in charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site, complete all as specified and as directed. |
| 8 | M&L for PVC solid ceiling panelling of 5mm thick any colour/design approved by engr in charge, inclusive of fixing on to ceiling with frame incl moulding end caps fixed with PVC sleeves and screws as required at site, complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc., complete all as directed. |
| 10 | M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement complete all specified and as directed. |
| 11 | M&L Rendering 12 mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even and Smooth,without using extra cement, complete all as specified and as directed. |
| 12 | M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 13 | Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) all as specified |
| 14 | M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer, complete all as specified and as directed. |
| 15 | M&L for Sand filling under floors in layers not exceeding 30cmin each layer or in foundations including watering and consolidation complete |
| 16 | M&L 60 mm thick machine pressed precast concrete interlocking paver block coloured PVC coard, glossy finish, vibrator casted any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment, complete all as specified and as directed. |
| 17 | Ditto all as per items no 16 but except tile , complete all as specified and as directed. |
| 18 | M&L for rubber molded coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4, complete all as specified and as directed. |
| 19 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and as directed. |
| 20 | M&L Non skid coloured ceramic tiles (premium quality) 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 21 | M&L Glazed ceramic coloured tiles (premium quality) in vertical surface such as skirting/ dado etc of size 450x300x7mm thick set and jointed in cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick plaster in CM 1:4 to receive the tiles, complete all as specified and as directed. |
| 22 | Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bedding layer in cement mortar 1:6 , complete all as specified and as directed. |
| 23 | Virified Ceramic tiles light shade 10 mm thick Double charged (square/rectangular) polished, area of each tiles Not exceeding 0.36 sqm, on Vertical Surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick screed bedding layer in cement mortar 1:4 walls, finished even and rough to receive the top layer , complete all as specified and as directed. |
| 24 | S&F 18-20 mm thick makrana white marble work (table rubbed and polished) as in steps, jambs, cills, pillars, cooking platform and like in set cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work incl rounding of exposed edges of marble, complete all as specified and as directed. |
| 25 | M&L for pre polished green marble as in cooking platform 16 to 18 mm thick over cement screed bed with pre griding and mirror polishing/granite polishing including making of hole for LPG pipe and chamfering the corners to the entire satisfaction of the Engr in Charge.. |
| 26 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.. |
| 27 | M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete . |
| 28 | Ditto all as per serial item No 27 above, but except bricks , complete all as specified and as directed. |
| 29 | M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 , complete all as specified and as directed. |
| 30 | M & L for Cutting holes in brick walls exc half brick but n exc. One brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed. |
| 31 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer , complete all as specified and as directed. |
| 32 | M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of oil ound distemper over a coat of primer , complete all as specified and as directed. |
| 33 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming, complete all as specified and as directed new surface of walls |
| 34 | Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area not exc 1.5 sqm each and removal to store , complete all as specified and as directed. |
| 35 | Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area exc 1.5 sqm but not exc 4.0 sqm each and removal to store , complete all as specified and as directed. |
| 36 | Refixing of shutters including taking down of any description exc 1.00 and n exc 2 Sqm each in same opening, complete all as specified and as directed. |
| 37 | Refixing of shutters including taking down of any description exc 2 Sqm each in same opening, complete all as specified and as directed. |
| 38 | S&F Pressed steel door frame double rebates of size 125mm x 60mm with including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed. |
| 39 | M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work as in filling of pressed steel door frame, complete all as specified and as directed. |
| 40 | S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated , complete all as specified and as directed. |
| 41 | S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.24 (a) of SSR part-I, complete all as specified and as directed. |
| 42 | S&F 35mm thick factory made flush shutter solid core construction with block board core and plywood face panel one face is covered with decorative veneer with lipping/frame, complete all as specified and as directed. |
| 43 | S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification complete all as specified and as directed. |
| 44 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain, colour PVC sheet reinforced with MS square tube, suppling and fixinging opening as per specification and drawing, complete all as specified and as directed. |
| 45 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed. |
| 46 | S&F in repair for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed. |
| 47 | Dismantling boarding, any description, fixed in any position with nails complete all as directed. |
| 48 | M&L for 18/19 mm thick prelaminated particle board exterior grade,prelaminated both sides with decorative choice laminaions fixed with screw to aluminium frame, complete all as specified and as directed and as directed |
| 49 | M&L in repairs 18/19mm thick block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame work including two coats of synthetic enamel paint over a coat of pink primer and teak wood 6mm thick liping all around the edges complete all as specified and as directed. |
| 50 | S&F in repairs 100 mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and as directed. |
| 51 | S&F in repairs 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame, complete all as specified and as directed. |
| 52 | S&F in repair aluminum anodised barrel tower bolt 150 mm long of extructed section,ISI marked, complete all as specified and as directed. |
| 53 | S&F in repair 200mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 54 | S&F in reapair aluminum anodised handle cast type 150 mm, anodised, ISI marked, complete all as specified and as directed. |
| 55 | S&F in reapir aluminum alloys anodised sliding door bolt with hasp, staples 300mm (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed, complete all as specified and as directed. |
| 56 | S & F 40mm Width of flaps (when open) Continuous (piano) hinges,mild steel, bright finish or elec troga complete all as specified and as directed. |
| 57 | Hasp and staple 100mm, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 58 | S&F 100 mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed for PVC Doors, complete all as specified and as directed. |
| 59 | S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame, complete all as specified and as directed. |
| 60 | S&F aluminum anodised barrel tower bolt 150 mm long of extructed section,ISI marked, complete all as specified and as directed. |
| 61 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 62 | S&F aluminum anodised handle cast type 150 mm, anodised, ISI marked, complete all as specified and as directed. |
| 63 | S&F aluminum alloys anodised sliding door bolt with hasp, staples 300mm (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed |
| 64 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 75mm, complete all as specified and as directed. |
| 65 | Supply and fixing cast iron door closer hydraulically regulated designation No 3 universal type suitable for door shutte averaging weight between 61 kg to 80 kg and fixed, complete all as specified and as directed and as directed. |
| 66 | S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws , complete all as specified and as directed. |
| 67 | M&L for 25 mm dia stainless steel pipe curtain rod fixed with & including SS powder coated hooks/brackets , shade as approved by GE, complete all as specified and as directed includng fixing of long size rawl plugs in wall , complete all as specified and as directed. |
| 68 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 450 x 600 mm, PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and as directed and as directed |
| 69 | Dismantling wroght iron or mild steel work of any description not otherwise provide for complete all as directed by Engr-in-charge. |
| 70 | Dismantling timber scantlings 40 sq. cm and over in section for unframed work, in any position, complete all as directed by Engr-in-charge. |
| 71 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and as directed. |
| 72 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250), complete all as specified and as directed. |
| 73 | Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 74 | S & F steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises glazed skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: glass pans and painting shall be measured & paid separately under respective item of schedule. |
| 75 | Ditto all as per ser item No-74 above, but window with glazing bars but with out sash bars . Note wire gauge and painted shall be measured and paid separately under respective item of schedule. |
| 76 | M & L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 77 | Ditto all as per Srl Item No 76 above, but one coat on old surfaces complete all as specified and as directed. |
| 78 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint with red oxide zinc chrome primer, complete all as specified and as directed. |
| 79 | Ditto all as per Srl Item 78 above, but one coat on old surfaces, complete all as specified and as directed. |
| 80 | Hacking out old broken glass (any thickness, size qauality or description) from wooden or steel framed glazed with putty or fixed with beads , complete all as specified and as directed. |
| 81 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and as directed. |
| 82 | S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane, complete all as specified and as directed. |
| 83 | S&F for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm each panes , complete all as specified and as directed. |
| 84 | Taking down old GI tubing and connection including fittings 15mm bore pipe, complete all as specified and as directed. |
| 85 | Taking down old GI tubing and connection including fittings 20mm bore pipe, complete all as specified and as directed. |
| 86 | Cutting chases, pinning in making good to facing where required for concealed water tubing or concealed conduit wiring and making good in CM 1:3, cutting not exc 10cm girth etc on brick walls, complete all as specified and as directed. |
| 87 | S&F 15mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and as directed. |
| 88 | S&F 20mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and as directed. |
| 89 | Refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and as directed. |
| 90 | Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and as directed and as directed. |
| 91 | S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated fancy type screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore, complete all as specified and as directed. |
| 92 | S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs, complete all as specified and as directed. |
| 93 | S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long Handle Minimum 300mm long fancy type (for Hospital) with capstan headed, screwed down, screwed for iron pipe in repairs for, complete all as specified and as directed. |
| 94 | S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). , complete all as specified and as directed. (Make : PRAYAG) |
| 95 | S&F in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding incl breaking up of existing damaged WC seat and connecting flush pipe etc , complete all as specified and as directed. |
| 96 | S& F in repairs WHB mixer chromium plated brass, size 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe , complete all as specified and as directed and directed. |
| 97 | S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed 15 mm pipe , complete all as specified and as directed. |
| 98 | S& F in repairs Vitreous China wash down water closet (pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device fixed, complete all as specified and as directed. |
| 99 | S& F in repairs PVC 10 litre syphonic action type flushing cistern, low level with inlet, ball valve, float and handle (ISI Marked) including brackets, flush pipe PVC 32mm bore and connection to WC, complete all as specified and as directed. |
| 100 | PVC connection 450mm long suitable for 15mm bore pipe n repairs including PTMT nuts, complete all as specified and as directed. |
| 101 | S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and as directed. |
| 102 | S & F in repairs Vitreous china urinal half stall type ,white including connection to flushing pipe and outgoing pipe, complete all as specified and as directed. |
| 103 | S& F in repairs Chromium plated brass shower rose, swivel type of size 125mm fixed to pipe complete all, complete all as specified and as directed . |
| 104 | S&F in repair Stainless steel sink with draining board (ISI marked), made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm all as , complete all as specified and as directed. |
| 105 | S&F Soap dish, stainless steel approx size 160mm x 160mm x 90mm, complete all as specified and as directed. |
| 106 | S&F in repair 32 mm dia PVC waste pipe for WHB , complete all as specified and as directed. |
| 107 | Dismantling of water tanks any type of capacity exc 500 ltrs n-exc 1000ltrs and removing to store , complete all as specified and as directed. |
| 108 | S&F 1000 ltr rotational moulded polyethylene water storage tank antimicrobial white triple layer (cylindrical vertical with closed top) hoisted and fixed in position any description , complete all as specified and as directed. |
| 109 | Dismantaling of water storage tanks any type of capacity exc 250 ltrsand not exc 500 ltrs and removing to store , complete all as specified and as directed. |
| 110 | S&F 500 ltr rotational moulded polyethylene water storage tank antimicrobial white triple layer (cylindrical vertical with closed top) hoisted and fixed in position any description complete all as specified and as directed. |
| 111 | S & F 20mm bore brass ball valve high pressure with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified and as directed. |
| 112 | S&F in repair 20mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 113 | S&F Powder coated aluminium work (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as directed by Engineer-in-Charge. |
| 114 | S&F Powder coated aluminium (minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaske etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically herever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as directed by Engineer-in-Charge. |
| 115 | 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq m in each pane, complete all as specified and as directed. |
| 116 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 117 | S&F 110 mm dia PVC (SWR) pipes Single socketed in any length with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 118 | S&F 110 mm dia PVC (SWR) bends any radius, complete all as specified and as directed. |
| 119 | S&F PVC (SWR) 75 mm . floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed |
| 120 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition, complete all as specified and as directed. |
| 121 | M&L Precast cement concrete Type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) set in CM 1:6 graded stone aggregate as in Cover slab for Drain, lintels, beams, in floors, roofs, landing, balconies, canopies, and shelves and the like, complete all as specified and as directed and as directed, Including necessary Form Work, complete all as specified and as directed. |
| 122 | S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 123 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected inposition and securing runners with holdfasts and brackets, complete all as specified and as directed. |
| 124 | S&F 0.56mm thick Aluminium corrugated sheeting Alloy 31000 H4, STUCCO Embossed finish with two corrugations side lap fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart, complete all as specified and as directed. |
| 125 | S&F in repairs Self-closing sensor taps, cast copper alloy, chromium plated,screwed for iron pipe and fixed in 15mm bore pipe, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender