Tender For Repair / Replacement Gi/Ms With Seamless High Carbon Steel Pipes Of Various Sizes, All Types Of Valves, Valve Pits, Chambers/Water Tanks And Other Misc Connected Work For Rcc, North Spring And South Spring Area At Kasauli Under Ge Kasauli
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Gi/Ms With Seamless High Carbon Steel Pipes Of Various Sizes, All Types Of Valves, Valve Pits, Chambers/Water Tanks And Other Misc Connected Work For Rcc, North Spring And South Spring Area At Kasauli Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in hard dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed. |
| 2 | Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed. |
| 3 | Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed. |
| 4 | Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 150 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed. Note:- New pipes shall be laid first at spring area and old ones to be taken out later. |
| 5 | Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.11 mm and weight 28.26 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed.(iii) Any other expenses including permision from state authorities are included under this item. |
| 6 | Material and labour for MS Flange of inner dia 150 mm (outer dia 164.22mm) and 280 mm outer dia of thickness 25.3 mm having 8 drilled holes conforming for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed. |
| 7 | Supply and fixing of joint for 150 mm nominal bore pipes, comprising one 5.0 mm thick steel-reinforced compressed asbestos fibre gasket, including 8 Nos. M38 nuts and bolts (each bolt not less than 25 mm in diameter and 125 mm in length), and 2 Nos. 5 mm thick washers per joint, suitable for pipes/fittings/bends, complete all as specified and directed by the Engineer-in-Charge. |
| 8 | Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 100 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed. Note:- New pipes shall be laid first at spring area and old ones to be taken out later. |
| 9 | Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-100 mm, outer dia 112.04 mm, with nominal wall thickness 6.02 mm and weight 16.08 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed.(iii) Any other expenses including permision from state authorities are included under this item. |
| 10 | Material and labour for MS Flange of inner dia 100 mm and 228.6mm outer dia of thickness 24 mm having 8 drilled holes for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed. |
| 11 | Supply and Fixing joint for 100mm nominal size pipes comprising of one 5.0 mm steel reinforced compressed asbestos fibre gasket and incl 8 Nos 19.05mm dia ,125mm long Nut ,bolts, 2 nos washer for each joint pipe /fittings/bends etc complete all as specified and directed. |
| 12 | Supply and Fixing in replacement of Air release valve DI Single Chamber, Tripple Action with Ss floating And working parts & Fb Expoxy coating in PN1.6 of size 150mm confoming to IS 14845 incl 8 Nos holes,19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed. |
| 13 | Supplying, laying, jointing and in replacement testing of Tees, suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed. |
| 14 | Supplying, laying, jointing in replacement of MS Seamless bend OF 150MM , suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed. |
| 15 | Supplying, laying, jointing in replacement of MS Seamless bend of 100mm suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-100 mm, outer dia 112.4 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed. |
| 16 | Supply and Fixing in replacement and testing of high pressure, heavy duty type cast steel Non Return,valve/ check valve, nominal size 150mm, PN 25 conforming to BS 1868, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item |
| 17 | Supply and Fixing in replacement and testing of high pressure, heavy duty cast steel sluice valve, nominal size 150mm, conforming to API 600, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected by Engr-in-charge. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item |
| 18 | M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate for anchorage blocks for pipe line/making good the cut portion of roads/paths/hard standings etc including necessary from work where required , to support the pipe line complete all as specified and as directed by Engineer-in-charge. |
| 19 | Amount of credit of Rs.349030.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender