Tender For Provn Of Certain special Repair Work Of B/R And E/M At Mil Stn Jamnagar Under Ge(A) Jamnagar.
Tender Value
47.23 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
94500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain special Repair Work Of B/R And E/M At Mil Stn Jamnagar Under Ge(A) Jamnagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Oct-2026 | AMENDMENT TO BOQ | BOQ | 22-Oct-2026 |
| 2 | 22-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 2 | Dismentling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 3 | S&F Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:4 complete all as specified and as directed. |
| 4 | M&L18- 20mm thick Granite(of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:3 complete all as specified and as directed. |
| 5 | Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing complete all as specified and as directed. |
| 6 | M&L Machine cut & polished Kota stone slab 20-25mm thick laid over screed base ,laid & ,jointed with grey cement slurry mixed with pigment to match the shade of the slab steps, jambs, pillars, window- cills,flooring etc including 20mm thck screed bed in CM 1:3 complete all as specified and as directed. |
| 7 | S&F Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:4 complete all as specified and as directed. |
| 8 | S&F Ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:4 complete all as specified and as directed. |
| 9 | Demolition of concrete of any description and in any position not other wise specially provided for cement concete (unreinforced) and all as specified and directed. |
| 10 | M&L 75 mm thick Cement concrete type C-2, 1:3:6 ( using 40 mm graded aggregate) as in plinth protection complete all as specified and as directed. |
| 11 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed by Eng-Eng-Charge. |
| 12 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. Note - rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed. |
| 13 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site.Note - rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 complete all as specified and as directed. |
| 14 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 15 | M&L door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 16 | S&F Pressed steel frames for doors size 125 mm X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and as directed. |
| 17 | Providing cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as filling in Pressed steel hollow door section complete all as specified and as directed. |
| 18 | S&F 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (any number of Panel) with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces,. The size of rail and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 19 | S&F factory made 35mm thick 2nd class hard wood glzed & skeleton door shutters,open rebated and prepared to recive gauge etc(without sash bars) edgs of framing plain, chamfered or etc,size of members of shutters as specified in SSR Pt-I, Sec-8 Clause 8.20 (a) without sash bar etc complete all as specified and as directed. |
| 20 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings complete all as specified and as directed. |
| 21 | M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 22 | Supply and Fix in repair of 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 23 | M&L preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and as directed. |
| 24 | S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; ramed balusters; walk ways; railings; framework of water tanks and similar works complete all as specified and as directed. |
| 25 | S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 100mm long complete all as specified and as directed. |
| 26 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and as directed. |
| 27 | S&F aluminium handles, cast type, anodised 100mm long complete all as specified and as directed. |
| 28 | S&F floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 29 | S & F 100mm Butt hinges, extruded aluminiumalloy with galvanisedmild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 30 | Dismantling exc 500 & n exc 1000 ltrs water tanks and removing from site complete all as specified and as directed. |
| 31 | S & F 1000 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) , hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, complete as specified in SSR Part-I complete all as directed by Engr -in-charge. |
| 32 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia complete all as specified and as directed. |
| 33 | Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 34 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed. |
| 35 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittingsand cutting grooves, filled with CM1:6 complete all as specified and as directed. |
| 36 | Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key,scrubbing down with water to receive plasterincluding necessary all scaffolding complete all as specified and as directed. |
| 37 | M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces or surface other than fair faces of brick work or on one side of lathing, finished even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L for rendering 5 mm thick in CM 1:4 mixed with liquid water proofing compound3% of cement, over and including 10 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair faces of brick work or on one side of lathing. Note:- Liquid water proofing compound shall be measured and paid for separately as “Supply only” |
| 39 | M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement complete all as specified and as directed. |
| 40 | M&L prepration of newly plastered surface of wall by hand held sander / long handle sander including cornices, pilasters etc and appliying with Airless spray two or more coats of Anti fungal Weather proof grade exterior acrylic emulsion paint @ 0.2 lt (undiluted) /10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturers insttruction over prepared and primed surface of external wall over and including one coat of acrylic water based Exterior grade rpimer @0.9 ltr (undiluted)/10 sq mttr diluted with water in 1:1 ratio (minium) as per approved manufacturer's instructions to be applied on prerated and wall (external) surfaces. complete all as specified and directed. |
| 41 | M&L for Prepration of newly plastered on walls by hand held sander / long handle sander including cornices, pilasters etc complete all as specified directed and applying two coat of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted )/10sqm diluted with water in 1:1 ratio (Minmum ) or as per approved manufacturers instructions to be applied on prepared and wall (interior) surface, over a coat 1 mm thick wall care waterproof cement based putty on walls complete as specified Notes:-(i)Filling cracks in wall using crack seal compound Asian smart crack seal or equivalent.Notes:- (ii) make -BergerHomeshield waterproof putty ,Asain paint smartcare waterproof putty , Nerolac prema waterproof putty ,Berger Homeshield waterprrof putty ,(iii) Approved OEM equipment to be used as per technical & site requirement and as mentioned above. |
| 42 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 43 | M&L complete removal of existing tretment by hand held sander / long handle sander washing down with Jet washer and appliying Airless spray two or more coats of Anti fungal Weather proof grade exterior acrylic emulsion paint @ 0.2 lt (undiluted) /10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturers insttruction over prepared and primed surface of external wall over and including one coat of acrylic water based Exterior grade rpimer @0.9 ltr (undiluted)/10 sq mttr diluted with water in 1:1 ratio (minium) as per approved manufacturer's instructions to be applied on prerated and wall (external) surfaces. complete all as specified and directed. |
| 44 | Complete Removal of existing treatment on ceiling and applying two coats of white wash complete all as specified and as directed. |
| 45 | Complete removal of existing treatment of old surfaces of wall including preparation of surfaces by hand held sander / long handle sander including cornices, pilasters etc and applying two coats of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.7 ltr (undiluted) /10sqm diluted with water in 1:1 ratio (Minmum ) or as per approved manufacturers instructions to be applied on prepared and wall (interior) surface, over a coat 1 mm thick wall care waterproof cement based putty on walls complete all as specified and as directed. Notes:-(i)Filling cracks in wall using crack seal compound Asian smart crack seal or equivalent.Notes:- (ii) make -BergerHomeshield waterproof putty ,Asain paint smartcare waterproof putty , Nerolac prema waterproof putty ,Berger Homeshield waterprrof putty ,(iii) Approved OEM equipment to be used as per technical & site requirement and as mentioned above. |
| 46 | S&F in repair Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 47 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 48 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 49 | S&F in repairs PVC(SWR) bend any radius, 110 mm dia complete all as specified and as directed. |
| 50 | S&F in repairs PVC(SWR) bend any radius, 75 mm dia complete all as specified and as directed. |
| 51 | S&F CP in repairs Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and as directed. |
| 52 | S&F in repairs angle cock chromium plated with long shank and cup (concealed type) 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, complete all as specified and as directed. |
| 53 | S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 54 | S&F in repair CP Tubular towel rail 20mm dia.D Type 60 cm Long aluminium anodised complete all as specified |
| 55 | S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end complete all as specified and as directed. |
| 56 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 57 | S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 58 | S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and as directed. |
| 59 | S& F in repair Sinks made of stainless steel 1mm thick kitchen or aboratory with plugsm wasers and wastes pipe including bedding in cement mortar on to drarf wall or including fixing cantilever brackets sink coupling and connecting union to pipe overall size 495 mmx420mm boel size 410mmx330mmx160mm complete all as specified and as directed. |
| 60 | Taking down all existing roof treatment and demolition of cement concrete padding/levelling course incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and juntion of parapet complete all as specified and as directed. |
| 61 | M&L of cutting out cracks to V-section in existing roofs or terracing , cleaning out ,wetting ,grouting with cement and sand slurry 1:3 complete all as specified and as directed. |
| 62 | M&L average 25mm thk Cement concrete type B-0, 1:2:4 (Using 12.5mm graded stone aggregate) as in levelling course/padding/coving & pedastal of water tank with slope 1:40 all as directed |
| 63 | M&L 10 mm thick plaster in CM (1:3) mixed with waterproofing compound on padding layer for roof treatment all as directed and as specified by Engr-in- Charage. (Note :- WPC shall be measured and paid seperately on supply only.) |
| 64 | M & L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weight not less than 3.00 kg /sqm and reinforced with non-woven polyster reinforcement with thermal insulation with polythene finish on upper side of membrane ,laid by torch application method with overlaps 150mm on length side and100mm on the width side as per manufactures instructions over a coat of approved cold applied bituminous oil based primer @300gm/sqm and applying two coats of aluminium paint 0.20lit/sqm complete all as specified and as directed by Engineer -in-Charge.. |
| 65 | Supply only intigral waterproofing compound complete all as specified and as directed. |
| 66 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 67 | M&L Pre cast cement concrete block type C-1 1:3:6 Using 20 mm graded stone aggregate exc 10 CM in width and setting in CM 1;6 complete all as specified and as directed. |
| 68 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m depth for foundations, sewage lines etc and n.exc 10 Sqm on plan for manholes and getting out in soft/loose soil complete all as specified and directed. |
| 69 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exc. 25 cm depth as in any type of soil complete all as specified and directed. |
| 70 | Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point complete all as specified and as directed. |
| 71 | Demolition and breaking up any sewage/ drain pipe not exceeding 200mm bore dia set in cement mortar including bedding haunching as directed by EIC complete all as specified and as directed. |
| 72 | M&L for cement concrete bedding to pipes after they are laid to 150mm bore drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) laid to falls including packing under, and tested, complete all as specified and directed. NOTE :- Pipe shall be measured and paid separately).as in repairs. |
| 73 | M&L for RCC NP-2 drain pipe 150 mm internal dia, grade ‘A’ laid in trenches and Collar/push joint complete all as specified and as directed. |
| 74 | M &L for RCC pipes Class NP-2 of size 200mm internal dia, laid in trenches and jointed with collar/push joint complete all as specified and directed. |
| 75 | Demolition for reinforcement cement concrete of any description and in any position complete all as specified and as directed. |
| 76 | M&L for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate in cover slabs including necessary form work etc for manholes covers set in CM 1:4 (reinforcement measured seperately) complete all as specified and as directed. |
| 77 | M&L for TMT bars 10 mm dia and over cut to length bent to shape required including bending and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 78 | M & L for hardcore of broken stone or boulder of gauge n exc,63mm, deposited,spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 79 | M&L 75mm thick PCC 1:3:6 type C-2(40mm graded stone aggt) as in path, hard standing, parking floors, etc., complete all as specified and as directed. |
| 80 | M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified. |
| 81 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm ), including making drainage opening wherever required complete all as specified and directed. |
| 82 | Dismantling boarding, any description, fixed in any position with Screws complete all as specified and directed. |
| 83 | M & L 18/19mm thick Pre-laminated particle board, interior grade, prelamination one side with decorative choice lamination & other side balancing white lamination, fixed with nails as in cupboards / cabinets incl locking arrangement complete all as specified and directed. |
| 84 | S&F 18/19 mm wide 6 mm thick lipping on veneered particle as in cupboard shutter and shelves complete all as specified and directed. |
| 85 | S&F in Brass handles,febricated type polished 100mm long complete all as specified . |
| 86 | S&F magnetic catches for cabinets of size 50mm complete with striking plate &magnetic stud complete all as specified . |
| 87 | S&F in repairs 2nd class hardwood plain fillet square rectangular in section wrought sawn secured with screws exc 13 & n exc 25 sqcm in section all as specified and as directed by Engineer-In-Charge.. |
| 88 | S & F in repairs white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc complete all as specified and directed.(Make : Cera , prayag, hindware or equvallent) |
| 89 | S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and directed. |
| 90 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. all as specified and directed . |
| 91 | S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B weight of section frame 1.248 kg/m and shutter section weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness,aluminium wire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles etc including taking down old window in any size and make. complete all as specified and directed.Note : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc |
| 92 | S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and makecomplete all as specifiedNote : rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc |
| 93 | S&F in repair 25mm dia stainless steel curtain rail, cut in required length and size to fit with opening incl fixing on bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed by Engr-in-charge. |
| 94 | S&F in repairs curtain rod side brackets of stainless steel, angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge. |
| 95 | S&F in repairs Brass CP wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed.make and joint with adhesive , taflon tape complete all as specified and directed. |
| 96 | S&F in repairs corner glass self 300mm and as selected,specified and directed by Eng-in-charge. |
| 97 | S&F in repair decorative type Mirror of 5/6 mm thick with beveled /grind without beading and CP screw with plugs as specified and all as directed by Engineer-In-Chagre |
| 98 | Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls/chajja by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it. Applying eppoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formwork complete all as specified and directed. |
| 99 | S&F in Repairs Health Faucet with 1.50mtr tube & Hook any description including flexible attachment complete all as specified and directed. |
| 100 | S&F in Repairs Toilet paper holder fancy type . Cat No BA-08 and as selected,specified and directed by Eng-in-charge. |
| 101 | S&F bib tap 15 mm bore with crutch or , screwed down,with sink cock swing spout (W/M)with flange complete all as specified and directed.Make:-Prayag Cat No 6816 cera/prayag/jaguar |
| 102 | M&L for racking of cracks upto 5mm wide,preparation and crack filling with polymer modified/chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size (Make: Pidilite/dr fixit,fosroc, or equivalent) all as specified and directed |
| 103 | M&L for racking of cracks exc 5mm but n exc 10mm wide,preparation and crack filling with polymer modified/chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size (Make: Pidilite/dr fixit,fosroc, or equivalent) all as specified and directed |
| 104 | Removing the plant/growth of any description size, any location of external surfaces of walls shafts by cutting & remvoing the roots completely spraying the suitable chemical (each plant 100 ML) in the removed portion to avoid re-growth & making good damaged portion to match the existing surfaces by PCC type B0 (1:2:4) 12.5 mm graded aggregate complete all as directed by Engr In Charge (Chemical :- Gramzone/Roundup or equavalent suitable chemical to remove/destroy the plants/roots) |
| 105 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed by Engr in charge. |
| 106 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surfacecomplete all as specified and directed by Engr-in-Charge. |
| 107 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed by Engr-in-Charge. |
| 108 | Taking down ceiling fan/ Exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Jamnagarcomplete all as specified and directed by Engr-in-Charge. |
| 109 | M & L for One light point controlled by one, one way switch 5 Amps Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-Charge. |
| 110 | Description all as per item No 138 here in before but using One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed by Engr in charge. |
| 111 | Description all as per item No 138 here in before but using One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed by Engr in charge. |
| 112 | Description all as per item No 138 here in before but using One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad complete all as specified and directed by Engr in charge. |
| 113 | Description all as per item No 138 here in before but using OneOne bell point controlled by one, bell switch 5 Amps complete all as specified and directed by Engr in charge. |
| 114 | Description all as per item No 138 here in before but using One using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed by Engr in charge. (power point) |
| 115 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and,cutting chases for concealed water,tubing or concealed conduit wiring,,etc., and making good, cutting not,exc 10 cm girth ®(stone massonary) complete all as specified and directed by Engr in charge. |
| 116 | S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed by Engr in charge. |
| 117 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed by Engr in charge. |
| 118 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed by Engr in charge. |
| 119 | S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed by Engr in charge. |
| 120 | S & F for modular step type fan regulator (BLDC) 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed by Engr in charge. |
| 121 | S & F for Bell push modular 6 Amps single module complete all as specified and directed by Engr in charge. |
| 122 | M&L for Earth continuity conductor or main earthing lead fixed to wall on battenor recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed by Engr in charge. |
| 123 | S&F for Bell Electric Ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and directed by Engr in charge. |
| 124 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 125 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed by Engineer-in-Charge. |
| 126 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed by Engineer-in-Charge. |
| 127 | S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 128 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S & F for MCB Tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 130 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 131 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 132 | S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed. |
| 133 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer-in-Charge. |
| 134 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed by Engr-in-Charge. Make:-Make Bajaj Cat Part No BCLAB 20W WH LED P, Wipro Cat Part No LL20-281-xxx065-ALI or equvalent make in Phillips and Havells. |
| 135 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make:- Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge plus Series) or equivalent in Philips, Wipro |
| 136 | S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan basecomplete all as specified and directed by Engr-in-Charge. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 137 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted complete all as specified and directed by Engr-in-Charge. |
| 138 | S&F ceiling fan 230 Volts,1200mm sweep with air delivery 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blades, down rod and other necessaries with brushless direct current motor(BLDC) with out remote system and electrical connection from ceiling rose to fan terminal complete all as specified and as directed by Engineer-in-charge. |
| 139 | Supply, installation, testing and commissioning of surface/wall-mounted 4-way Vertical TPN Distribution Board, suitable for 415 V, 3-phase, 4-wire, 50 Hz AC supply, fabricated from minimum 1.6 mm thick CRCA sheet steel, powder coated, with double-door construction, suitable IP protection, detachable gland plate, cable entry arrangement, circuit identification labels, neutral link and earth bar. Complete with 100A TPN copper busbar, suitable rated 4-pole MCCB as incomer and 4-way outgoing arrangement with suitably rated SP/TP MCBs, insulated/shrouded busbars, FRLS copper internal wiring, copper lugs, ferrules, glands, hardware, earthing arrangement and all necessary accessories. The complete DB shall be suitable for the specified fault level and conform to relevant IS/IEC 61439 requirements, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 140 | Supply, installation, testing and commissioning of 63A, 4-Pole MCCB, suitable for 415V, 3-phase, 4-wire, 50Hz AC supply, thermal-magnetic adjustable/thermal-magnetic type, with suitable rated short-circuit breaking capacity of minimum 25kA at 415V, complete with trip mechanism, ON/OFF/TRIP indication, fixed mounting arrangement, terminals and all necessary accessories. The MCCB shall be suitable for protection against overload and short circuit and shall conform to IS/IEC 60947-2, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 141 | S&F PVC non metallic PVC conduit ISI marked heavy duty white/ivory colour and its accessories heavy duty ISI marked of size 20mm dia for LAN, telephone and TV connection including cutting, chasses and making good disturbed surfaces to match existing finish with plaster complete all as specified and directed. |
| 142 | M&L for filling dry and clean sand in trenches for cable cushioning 8cm below and 15 cm above complete all as specified and directed. |
| 143 | M&L for un reinforced precast concrete cable cover, LV low voltage type-I flat size 250mmx150mmx40mm complete all as specified and directed. |
| 144 | M & Lfor XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 Volts grade cross sectional area of 25 Sqmm 4 core laid in trenches under floor/road/hard standing, along poles etc complete all as specified and as directed by Engineer-in-charge. |
| 145 | S&F GI pipe light grade 40mm bore for cable protection fixed to poles/along wall/floor/under road/acrossthe drain or nallah including taking down old unservuceable GI pipe complete all as specified and as directed by Engineer-in-charge. |
| 146 | Taking up/down GI tubing and connections 25mm size of pipes including all fittings complete all as specified and directed. |
| 147 | Taking up/down GI tubing and connections 40mm size of pipes including all fittings complete all as specified and directed. |
| 148 | S&F tube GI medium grade 25mm dia with all fittings laid in trenches complete all as specified and directed. |
| 149 | S&F tube GI medium grade 40mm dia with all fittings laid in trenches complete all as specified and directed. |
| 150 | S&F gun metal valvs with iron wheel head ,screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender