Tender For Provision Of Water Pump With Pipe Line And Associated Fittings At C Site At Ina Ezhimala
Tender Value
10.28 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
21000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Water Pump With Pipe Line And Associated Fittings At C Site At Ina Ezhimala
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for laying pipes in trenches/removing of old pipes and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 3 | Removing excavated soil n exc 50M and depositing where directed at level n exc 1.5 M above the starting point complete all as specified and as directed. |
| 4 | Cutting the existing 80/50mm dia GI/CI pipe line for insertion and including of suitable tee, jointing material, excavation and earth work etc.all as specified and as directed. |
| 5 | Supply and lay CPVC pipes SDR-11 and with all plain CPVC SDR -11 fittings in trenches of the following sizes of pipes complete all as specified . |
| 6 | 25mm bore |
| 7 | 32mm bore |
| 8 | 50mm bore |
| 9 | Supply and lay CPVC pipes of CPVC Schedule 80 pipes & plain CPVC Schedule 80 fittings with all fittings in trenches of size 80 mm bore complete all as specified and as directed. |
| 10 | Material and Labour for cleaning of shallow well of 2 mtr dia by Drain out water from well by means of pumping out water up to bottom level approx 4 mtr depth from ground level , removing dirts, sediments ,silts and mud etc from bottom by using mechanical equipment/man power ,cleaning of bottom and side walls of inside with wire brush for cleaning the way of holes/porous for maintain natural spring including spraying required quantity of bleaching powder including clearing of vegetation inside well and up to 2 mtr distance and plastering inside surface complete all as specified and as directed. |
| 11 | Supply and Fix Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of wells top cover and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 12 | Material and Labour for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples not exceeding 4 kg/sqm supplied and fixed completed steel members as top cover on wells completeall as specified and as directed. |
| 13 | Material and Labour for painting of one coat of primer and two coats of epoxy paint of suitable colour on welded wire mesh/angle irons fitted on 3 mtr dia shallow Well complete all as specified and as directed. |
| 14 | Supply and Fix Nylon net as per the sample for covering top of SHALLOW well Complete all as specified and as directed. |
| 15 | Supply, Install,testing and commissioning of 5 HP centrifugal monoblock pumpset, suction size 80mm and delivery size 65mm, Discharge of 8.70 -LPS @ 17 -26 mtr, 2870 RPM, 415V,3 phase 50Hz , single stage, with bronze impeller, cast iron motor body, cast iron delivery casing, stainless steel pump shaft including necessary foundation and cover complete all as specified and as directed. Make : Kirlosker(KDI-527++) or equivalent in KSB, Crompton |
| 16 | Supply, Install,testing and commissioning of 1 HP centrifugal monoblock pumpset, suction size 25mm and delivery size 25mm, Discharge of 7 -64LPM @ 6 -45 mtr, 2800 RPM, 415V,3 phase 50Hz , single stage, with bronze impeller, aluminium die cast motor body, including necessary foundation and cover complete all as specified and as directed. Make : KSB aqua simba 1 or equivelent in Kirlosker, crompton |
| 17 | Supply & Fixing and connecting up complete MCB DB SPN 4 way, double door, 230 V, for MCB as incomer and DP/SP MCBs as out going, IP-56 protection, with copper bus bar ,neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides all as specified and as directed. |
| 18 | Supply and fixing , MCB SPN 16 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity all as specified and as directed. |
| 19 | Supply laying and testing cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and as directed. |
| 20 | Supply laying and testing cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and as directed. |
| 21 | Material and Labour bricks common burnt clay building bricks, sub-class ‘A’ designation 75 for cable protection complete all as specified and as directed. |
| 22 | Material and Labour for spreading of riddled earth on XLPE cable for cable cushioning complete all as specified and as directed. |
| 23 | Supply and Fix Rotational moulded polyethylene water storage tanks 3 layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 750 ltr complete all as specified and as directed. |
| 24 | Supply and Fix Rotational moulded polyethylene water storage tanks 3 layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 2000 ltr complete all as specified and as directed. |
| 25 | Supply and fix Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe |
| 26 | 25mm bore (minimum weight- 455 gram) |
| 27 | 40mm bore (minimum weight- 690 gram) |
| 28 | Supply, install, testing and commissioning of LT distribution panel, CPRI approved, weather/vermin proof, made out of 3 mm thick CRCA sheet, factory assembled cubicle pattern modular and compartmentalized construction, outdoor(IP56), with front and backside hinged double door with locking arrangement, floor mounted free standing type, duly powder coated, 3 phase and neutral 200 amps current carrying capacity aluminium bus bar with epoxy insulated coating with colour code and insulated support with aluminium earth bus of size 25x3mm with terminal switch, cable galleries, inter connecting bus bar connection/linkage, complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) bedding upto a height of 45 cm above gorund level, including dismantling and taking out old u/s LT Panel Board and remove from site reconnecting existing/new LT Cables with new panel board complete, comprising the following all as specified and as directed. |
| 29 | (a) MCCB, 415 Volt, 4 pole, of capacity 160 Amps, 36 KA - 1 No (Incommer). (b) MCCB, 415 Volt, 4 pole, of capacity 63 Amps, 25 KA - 1 No (c) MCB, 415 Volt, 4pole, of capacity 32 Amps, 10 KA - 2 Nos.(d) MCB, 415 Volt, 3pole, of capacity 16 Amps, 10 KA - 2 Nos.(e) MCB,SPN 230 Volt, of capacity 32 Amps, 10 KA - 4 Nos.(f) DOL Starter,complete with all accessories, 415 Volt, 50 Hz of capacity suitable for 5 HP, 3 Phase, motor – 01 No (g) Single phase preventer with reverse phase protection, 415 Volt, 3 Phase, 50 Hz of rating 25 Amps - 01 No (h)Volt Meter digital type 0-500 Volt with selector switches - 1 No (i) Ammeter digital type with CT for three Phase 0-200 Amps with selcetor switch - 1 Set (j) LED indication lamps with backup MCB for 3 phase supply –1 set.(k) Copper Internal Wiring (l) Locking arrangements |
| 30 | Material and labour of earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically in a pit not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below level connected to GI earth strip of size 32 x 6 mm by means of bolts, nuts and washers (earth plate covered with charcoal dust and common salt in alternate layers) GI earth wire protected by galvanized steel pipe light grade of 15 mm dia upto switch board and connected to main switch board, including provision of 20mm dia GI tubing light grade watering pipe with funnel and wire mesh PCC earth pit (1:3:6) type C-1 covered with CI cover hinged with frame including excavation and earth work complete all as specified and shown in electrical plate No 5 of SSR Part I, including taking out unserviceable earthing,all as specified and as directed. |
| 31 | Material and labour of earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically in a pit not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below level connected to GI earth wire 4mm dia by means of bolts, nuts and washers (earth plate covered with charcoal dust and common salt in alternate layers) GI earth wire protected by galvanized steel pipe light grade of 15 mm dia upto switch board and connected to main switch board, including provision of 20mm dia GI tubing light grade watering pipe with funnel and wire mesh PCC earth pit (1:3:6) type C-1 covered with CI cover hinged with frame including excavation and earth work complete all as specified and shown in electrical plate No 5 of SSR Part I including testing on completion,all as specified and as directed. |
| 32 | Supply and lay earth continuity conductor or main earthing lead of 8 SWG (4mm dia) in trenches/wall all as specified and as directed. |
| 33 | Material and Labour for construction of PCC valve chamber,inner size 30x30x30 cm with PCC(1:2:4) of wall thickness 10cm along with PCC foundation (1:3:6),100mm thick with offset of 100mm all-round including provision of 3mm thick MS cover, with angle iron 50x50x6 mm all-round embeded in concrete fixed with hold fast 35mm x3mm , 100mm all-round duly painted with 2 coats of synthetic enamel over a coat of red oxide primer,all as specified and as directed. |
| 34 | Supply and fix Gun metal gate valves with iron wheel head screwed both ends for iron pipe, confirming to IS specification all as specified including taking out the unserviceable of the following sizes |
| 35 | 25mm bore |
| 36 | 32mm bore |
| 37 | 50mm bore |
| 38 | Supply and fix Valve butterfly conforming to IS 13095 50 mm (2\\") dia suitable to fix on CPVC pipe of 50mm dia complete all as specified and as directed. |
| 39 | Supply and fix Non return butterfly valve 50 mm (2\\") dia suitable to fix on CPVC SCH- 40 pipe complete all as specified and as directed. |
| 40 | Supply and fix CI Foot Valve flanged end housing conforming to IS 4038 80 mm (3\\") dia suitable to fix on UPVC ASTM pipe complete all as specified and as directed. |
| 41 | Material and Labour for construction of valve chamber of internal size 600mmx600mm 600mm with foundation PCC 1:4:8 type D2 (100mm thick) laterite stone masonary 200 mm thick in CM 1:4 with 100mm offset allround, PCC 1:2:4 TYPE B1 for coping (75 mm thick) rendering in CM 1:4 15 mm thick on both internal and external surfaces (15cm below GL) including provision of MS sheet cover 3 mm thick and 40x6 mm flat iron frame, 50x6 mm Fl hold fast embedded in coping with two coat of synthetic enamel paint over a coat of red oxide primer with necessary 3 coats white wash to external surface earth work and excavation handle of 12mm dia MS rod etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender