Tender For Providing,Laying,Testing & Commissioning Of 500 Mm Dia Di ( K- 9 ) Pipeline From Reservoir 1 To Reservoir 2 At Tata Sez Gopalpur Industrial Park, Ganjam, Odisha
Tender Value
2.17 Crore
Estimated cost
Bid Submission
12 Oct 2026
11 days left
EMD
2.17 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing,Laying,Testing & Commissioning Of 500 Mm Dia Di ( K- 9 ) Pipeline From Reservoir 1 To Reservoir 2 At Tata Sez Gopalpur Industrial Park, Ganjam, Odisha
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in all kind of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge. |
| 2 | Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, royalty, loading & unloading as per specification & direction of EIC. |
| 3 | Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC. |
| 4 | Providing all materials, labour, T&P for laying of centrifugally cast (Spun) Ductile Iron pressure pipes for water works purpose with socket & spigot ends confirming to IS-8329/2000 with 3rd revision in standard lengths for classification K-9 suitable for push on joints (Rubber Gasket 'D' jointing) with outside zinc coating as per IS-8329/2000 including aligning the pipes inside trench as per IS-12288/1987 including testing the pipe line with required water pressure as per IS-8329/2000 amendment 1st, Sep. 2011 etc. All complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, rubber gasket & fittings which shall be paid separately). |
| 5 | 500mm dia (NB) S/S pipe K-9 suitable for push-on joint |
| 6 | Providing all labour, T&P and making push-on joint with rubber gasket ring as per IS-5382/1985 1st Revision suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure (The cost is inclusive of cost of ring) and all complete as per specification & direction of E.I.C. |
| 7 | Labour only for Pipes |
| 8 | Rubber Gasket (EPDM/SBR) suitable for 500mm dia D.I pipes & fittings with ISI mark. |
| 9 | Material with labour (For fittings) |
| 10 | 500mm Dia D.I K-9 Pipe |
| 11 | Providing all materials, labour, T&P and laying in trenches following D.I fittings & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. confirming to IS-9523:2000, 1st revision with pressure rating PN-1.0 of following nominal diameter, all complete including test the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket) |
| 12 | 500mm x 90º D/S Bend |
| 13 | 500mm x 45º D/S Bend |
| 14 | 500mm x 22.5º D/S Bend |
| 15 | 500mm x 11.25º D/S Bend |
| 16 | 500 Flanged Socket |
| 17 | 500mm Flanged Spigot |
| 18 | 500x500x500mm A/F Tee |
| 19 | 500x80x500mm D/S with Flange Tee |
| 20 | 500mm CI MJ Collar |
| 21 | 500mm Blank Flange |
| 22 | Providing, fitting & fixing of following size Ductile Iron valves as per IS 9523/2000 specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. |
| 23 | 500mm dia DI Sluice valve (Non rising spindle) of PN-1.60 as per IS-14846/2000 . (Make:Kirloskar/Vag/Audco) |
| 24 | 80mm dia DI Sluice valve (Non rising spindle) of PN-1.60 as per IS-14846/2000. (Make:Kirloskar/Vag/Audco) |
| 25 | 80mm dia Kinetic Air Valve without Isolating Sluice Valve As per IS-14845(P.N.-1.6)(Make:Kirloskar/Vag/Audco) |
| 26 | 250 mm Dia scour valve |
| 27 | Providing all materials, labour and T&P required for construction of RCC M-25 valve chamber of following minimum size having minimum cube strength 250Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, the minimum thickness of RCC base slab, all side walls and roof slab shall be not less than 200mm, 150mm and 125mm respectively,Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed. PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing and fixing pre-cast factory made RCC man hole cover with frame of clear opening of 600mmx450mm and providing and fixing of Polypropylene Steel Reinforced Man Hole stps of approved quality and size in two parallel lines of 300mm spacing in vertical walls with center to center 375mm(staggered).Painting the chamber with 2 (two) or more coats of approved water proofing cement paint over a coat of cement wash. Printing and writing the wall sign board of approved size and specification including cost of all materials, labour, T&P, royalties, all and hire & running charges of machineries with POL etc. all complete as per specification & direction of EIC. |
| 28 | Inner size 1500mm x 1200mm x 2000mm height valve chambers |
| 29 | Construction of RCC M-25 thrust block of following minimum size having minimum cube strength 200Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, alignment & size for all kinds of RCC work with steel centring materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed, PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing etc. all complete as per specification & direction of EIC. |
| 30 | RCC Thrust block of size 1500mm x 1500mm x 1500mm height |
| 31 | Providing all materials , labour, T&P for making flange joints with the pipes & fittings including supply of required & approved size of M.S. nuts & bolts, washer & rubber insertion & paints etc. including testing the joints with required water pressure etc. all complete as per specification & direction of EIC. |
| 32 | 500mm dia Flange Joint |
| 33 | 80mm dia Flange Joint |
| 34 | Providing all materials, labour T&P for laying of following dia MS pipes with required size of fittings, like off set, bend, tapper etc. as per site condition for water works purpose, including gas cutting by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after \\"V\\" grove cutting including cost of hire and running charges of welding generator set etc,(The pipes shall be painted with two or more coats of approved anti corrosive Epoxy paint of approved shade ) and aligning the pipes below/ above the ground level as per site condition. Earth work excavation in all kinds of soil/ rock of required depth and width, back filling, dewatering wherever necessary, shoring and shutting etc. for the work The cost inclusive of all , duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables etc. including testing the joint with required water pressure etc all complete as per specification and direction of EIC. |
| 35 | Laying of 500mm dia MS Pipe 8mm thick as per IS:3589 Gr.330 MS pipes (Fe-450 grade) conforming to IS 3589-2001 |
| 36 | Providing all materials, labour, T&P for fixing MS flanges suitable for following dia MS pipe including cutting the pipes by oxygen and acetylene gas flames as per the required size and slope and electric welding the same with the pipes as per IS specification including cost for hire and running charges of all machine with POL. (The flanges shall be made out of following thickness plate after cutting as per required size and shape, drilling of bolt holes as per IS specification, painting the same with two or more coats of anti corrosive paint (Epoxy), the cost inclusive of hire & running charges of machineries, POL, To & Fro charges with all consumables, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC. |
| 37 | MS Flange suitable for 500mm dia (NB) 20 mm thick MS plate 450 mm dia |
| 38 | Providing all materials, labour T&P for gas cutting of 8mm thick MS Pipe by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after \\"V\\" grove cutting including cost of hire and running charges of generator set etc |
| 39 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at Workshop by using welding generator including testing of joints, as per specification complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender