Tender For Repairs And Maintenance Of Various Snow Machines Viz. Snow Cats 3Rd Sonalika, Snow Cat (2Nd, 5Th, 7Th, 9Th, 10Th, 13Th And 14Th) And Snow Machines (Mc 8, 10, 31, 35, 59 Unimog, Leyland 1St, Guru 2Nd And 3Th Of Sccr Pulwama Of Mechanical An
Tender Value
2.33 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
0 days left
EMD
4670
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance Of Various Snow Machines Viz. Snow Cats 3Rd Sonalika, Snow Cat (2Nd, 5Th, 7Th, 9Th, 10Th, 13Th And 14Th) And Snow Machines (Mc 8, 10, 31, 35, 59 Unimog, Leyland 1St, Guru 2Nd And 3Th Of Sccr Pulwama Of Mechanical And Hospital Sub-Division 2Nd Anantnag (Hq. Pulwama). (3)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Oct-2026 | Extension 1st | Date | 13-Oct-2026 |
| 2 | 13-Oct-2026 | Extension-III | Date | 16-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Snow Cat 3rd Sonalika:Repairs to the gear box assembly:The job includes disassembling of all electrical wires/connections hydraulic hoses steering column and other control linkages and liftng of cabin by way of engaging of crane and disassembling of chassis frame to access gear box and opening of the same and disassembling of various gear box parts by using necessary tools and tackles .The job also includes reassembling of the gear box along with chasis frame back to the machine. |
| 2 | Providing and fitting of primary shaft of the gear box |
| 3 | Providing and fitting of synchronizer kit |
| 4 | Providing and fitting of bering for the primary shaft |
| 5 | Providing and fitting of bearing for lay shaft |
| 6 | Providing and fitting of seal ring |
| 7 | Providing and fitting of needle cage kit |
| 8 | Providing and fitting of bearing for primary shaft |
| 9 | Providing and fitting of gear block of the primary shaft |
| 10 | Providing and fitting of primary hydraulic steel hose pipe along with fitting nut and collar on both sides |
| 11 | Providing and fitting of friction disc of the main clutch |
| 12 | Fixing of cutting edges to the fixed snow plough . The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 16 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 16 no. nuts bolts M18 of 80 mm long (Snow cat 2nd,5th,7th,9th,10th,13th,14th). |
| 13 | Repairs to the fixed plough assembly. The job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged/cracked spots..The job also includes alignment of the blade frame.(Snow cat ,5th,7th,9th,10th,13th,14th) inclusive of material. |
| 14 | providing and fitting of complete unit double clutch assembly.The job includes removing of any kind of welded joints of the supporting frame by suitable means so as to slide the engine assembly to proper position to replace the damaged clutch dresser by new one. (as recommended by oem) the tools and tackles required are to be provided by the executing agency. (CAT 5th.) |
| 15 | Repairs to the frame mount and fixed plough assembly The job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged /cracked spots.The job also includes straightening/repairing of the damaged front member and frame members.(Snow cat 2nd) |
| 16 | Fixing of cutting edges to the fixed snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 18 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nuts bolts M18 of 80 mm (M/C 10,18) |
| 17 | Fixing of cutting edges to the variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 18 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nut bolts M16 of 80 mm long.(M/C 31,M/C 35). |
| 18 | Fixing of cutting edges to the Variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 20 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 20 no. nuts bolts M18 of 80 mm. (Unimog )/Leyland 1st,M/C 59). |
| 19 | Fixing of cutting edges to the variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 24 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 24 no. nut bolts M16 of 80 mm long.(Guru 2nd,3rd,5th,6th) |
| 20 | Repairs to the fixed plough assembly. the job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged /cracked spots. The job also includes repairing to the hydraulic jack by way replacing jack kit and strengthening of base plate by way of welding and replacing wornout nuts and bolts.(M/C 10,18) |
| 21 | Reconditioning of Front Leaf SpringAssembly: Dismounting of leaf springassembly from the vehicle anddismantling the same, includes cleaning ofleaf springs, tempering of leaf springs byhammering/jacking devices upto theappropriate shape and tension,replacement of centre bolt with nut,spring clips, spring pins, leaf spring boltswith nuts, spacer, bush; greasing of leaves& fitting of complete assembly back to itsplace.The job includes replacement of two damaged/cracked leaves with new ones as per sample. The job further includes include consumables and all allied items requiredfor completion of the job. MC 59 |
| 22 | REPAIRS TO THE VARIABLE PLOUGH ASSEMBLY. THE JOB INCLUDES DISMOUNTING OF THE PLOUGH FROM THE MACHINE AND REMOVING OF BENDS BY HEATING, PRESSING, HAMMERING AND WELDING AT DAMAGED /CRACKED SPOTS. MC 31,MC35,MC59,MC LYELAND 1ST,Unimog Pul,Guru 2nd,Guru 3rd ,Guru 5TH ,Guru 6TH. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 16, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender