Tender For Repair / Replacement Roof Sheets, False Celing, Roof Treatment, Joinery, Flooring, Sanitary Fittings And Other Connected Work At Dgnp Office Complex, Eqpt Area, Central Store, Mandir Complex , Md Offr Accn And Certain Other Places Under Dg
Tender Value
10 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
21 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Roof Sheets, False Celing, Roof Treatment, Joinery, Flooring, Sanitary Fittings And Other Connected Work At Dgnp Office Complex, Eqpt Area, Central Store, Mandir Complex , Md Offr Accn And Certain Other Places Under Dgnp(V).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fiber, pulp, insulations etc) or insulation boards/slabs/ ceiling of any thickness, including cover fillets and frame complete all as specified and as directed. |
| 2 | S&F Powder coated aluminium snap grid frame work for false ceiling with grid size 605mm x 605mm complete all as specified and as directed. |
| 3 | S&F Hangers 6mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia., 40mm long complete all as specified and as directed. |
| 4 | M&L for Gypsum Board of 12mm thick of size 605mm x 605mm ceiling boards to be fixed in aluminium grid frame work as per manufacturers instructions complete all as specified and as directed. |
| 5 | M&L for 10 mm thick seam less ceiling gypsum board fixed with screws as per manufacturers instructions with and including GI frame work, with any sunk or raised moulding as required at site with smooth finishing and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed. |
| 6 | Dismantling timber scantling 40 sq cm and over in section in any position in unframed work complete all as specified and as directed. |
| 7 | Dismantling asbestos cement (corrugated, semi corrugated etc,) sheets in roof coverings complete all as specified and as directed. |
| 8 | S&F 0.50 mm thick pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet of any colour on exterior side having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws and cyclone resistant washers etc., complete all as specified and as directed. |
| 9 | S&F 0.50 mm thick pre painted Galvalume aluminium zinc coating GI based plain steel sheet of any colour on exterior side having tensile strength of 550 Mpa as in roof ridges, fixed with self tapping screws and cyclone resistant washers etc., complete all as specified and as directed. |
| 10 | M&L for 2mm thick self adhesive bituminous felt for roof treatment as in patches including necessary accessories and scaffolding with safety precautions including taking down of old treatment complete all as specified and as directed. |
| 11 | M&L for self driven screws with bituminous washers including necessary accessories and scaffolding with safety precuations including taking down old screws complete all as specified and as directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 13 | S&F steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St-240 complete all as specified and as directed. |
| 14 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirm to Fe 410-W (Gde -E-250), Quality A complete all as specified and as directed. |
| 15 | M&L for 1mm thickness plain, black mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and as directed. |
| 16 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and as directed. |
| 17 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 18 | M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:6 complete all as specified and as directed. |
| 19 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed. |
| 20 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L for rendering 10mm thick in CM 1:3 on fair faces of brick or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion white or tint over a coat of primer on platered and other surfaces including 3 mm thick wall care putty on plastered surface complete all as specified and as directed. |
| 24 | M&L for prepartaion of newly plastered surfaces of walls and finishing with Acrylic Smooth exterior paint of required shade : New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 25 | M&L for preparation for surfaces plastered or unplastered new surfaces of ceilings and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 26 | Taking down existing water proofing treatment any type and thickness from top surface of roof slab including backing layer of mortar and removing the materials from the site to a distance not exceeding 50m complete all as specified and as directed. |
| 27 | M&L for 40mm thick cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in slab flooring surfaces finished even and smooth using extra cement complete all as specified and as directed. |
| 28 | M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 on concrete surfaces for laying floor finishes/roof treatment complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 29 | M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 on concrete surfaces for laying floor finishes/roof treatment complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender