Tender For Repairs To Doors/ Windows, Roof Treatment, Tiles, Plumbing, Sanitary Fittings, Roof Sheet And Certain B/R Works In Domestic Area At Afs Yelahanka.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Doors/ Windows, Roof Treatment, Tiles, Plumbing, Sanitary Fittings, Roof Sheet And Certain B/R Works In Domestic Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Material & Labour for non skid coloured ceramic tiles 7 & 8 mm thick area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as specified and directed. |
| 3 | Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of ech tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc,laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as specified and directed. |
| 4 | Material & Labour for Glazed coloued Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry incl matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished complete all as specified and directed. |
| 5 | Material & Labour for Granite(of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishingtypes over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 7 | Material & Labour for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection and paving finishing surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | Demolition of brick work or stone masonry built in CM incl all quions complete all as specified and directed. |
| 9 | Taking down cement plaster from walls of any description complete all as specified and directed. |
| 10 | Material & Labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 type C1 1:3:6 (20 mm grared aggregate) complete all as specified and directed. |
| 11 | Material & Labour for 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 12 | Material & Labour for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. |
| 13 | Material & Labour for applying two coats of distemper (OBD) over primer including Preparation to the new surfaces of wall, complete all as specified and directed. |
| 14 | Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 15 | Material & Labour for Complete removal of existing wall surface finish and applying two coat of oil bound distember over primer complete all as specified and directed. |
| 16 | Material & Labour for existing wall surface finish and applying one coat of oil bound distember complete all as specified and directed. |
| 17 | Material & Labour for Complete removal of existing surface finish and applying 1-2 mm thick wall care putty at wall and ceiling surfaces complete all as specified and directed. |
| 18 | Material & Labour for preparation of surface and applying two coat of White wash on old wall surface complete all as specified and directed. |
| 19 | Material & Labour for Preparing old painted wooden surface and applying one coat of Synthetic enamel Paint complete all as specified and directed. |
| 20 | Material & Labour for Preparing old painted steel surface and applying one coat of Synthetic enamel Paint all as specified and directed. |
| 21 | Material & Labour for for one coat of exterior emulsion paint to old decorated surfaces of wall incl preparation of surfaces complete all as specified and directed. |
| 22 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 23 | Taking down door chowkats or frames exceeding 1.5 sqm but not exceeding with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 24 | Taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, complete all as specified and directed. |
| 25 | Taking down shuttes of any description exc 2.00 sqm each and refixing in the same opening after necessary easing and cutting complete all as specified and directed. |
| 26 | Material & Labour for Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 )( using 12.5 mm graded aggregate) ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. |
| 27 | Supply & Fixing for powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed. |
| 28 | Supply & Fixing for Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement , glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. |
| 29 | Supply & Fixing for powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges powder coated aluminium snap beading screws etc complete all as specified and directed. |
| 30 | Supply & Fixing for sheet black tinted glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket complete all as specified and directed. |
| 31 | Supply & Fix Door closer hydraulically regulated, alluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified. |
| 32 | Supply & Fixing for Mortice lock, alluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified and directed. |
| 33 | Supply & Fixing for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 34 | Supply & Fixing for Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete all as specified and directed. |
| 35 | Supply & Fixing for II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 36 | Supply & Fixing for Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap complete all as specified and directed. |
| 37 | Material & Labour for Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work as in repairs complete all as specified and directed. |
| 38 | Material & Labour for 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs complete all as specified and directed. |
| 39 | Supply & Fixing for 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete. |
| 40 | Supply & Fixing for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 41 | Supply & Fixing for 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats all as specified and directed. |
| 42 | Material & Labour for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 43 | Supply & Fixing for Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 complete all as specified and directed. |
| 44 | Supply & Fixing for aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section complete all as specified and directed. |
| 45 | Supply & Fixing for aluminium anodised, barrel tower bolt 150mm of extruded section complete all as specified and directed. |
| 46 | Supply & Fixing for aluminium handle 150mm cast type anodised complete all as specified and directed. |
| 47 | Supply & Fixing for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds complete all as specified and directed. |
| 49 | Supply & Fixing for sheet glass ordinary quality 4mm thick and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 50 | Supply & Fixing for figured glass pin headed type 4mm thick and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 51 | Supply & Fixing for sheet glass ordinary quality 4.00 mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket complete all as specified and directed. |
| 52 | Supply & Fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm complete all as specified and directed. |
| 53 | Supply & Fixing for in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 54 | Supply & Fixing for framed work as grills conforming to Fe 290 Gde E-165 all as specified and directed. |
| 55 | Material & Labour for Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide zinc chrome to steel surface all as specified and directed. |
| 56 | Supply & Fixing in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia complete all as specified and directed. |
| 57 | Supply & Fixing for decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as specified and directed. |
| 58 | Taking up or down 15mm steel tubing and connections complete all as specified and directed. |
| 59 | Taking up or down 25mm steel tubing and connections complete all as specified and directed. |
| 60 | Supply & Fixing for 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 61 | Supply & Fixing in repair CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make : FLR-5169NB of make \\"JAQUAR\\" or Equvalent make specified in List of Manufactures . |
| 62 | Supply & Fixing in repair CP Brass 3-in-1 wall Mixer with over head and hand shower for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make : FLR-CHR-5281N of make \\"JAQUAR\\" or Equvalent make specified in List of Manufactures . |
| 63 | Supply & Fixing for CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified and as directed |
| 64 | Supply & Fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 65 | Supply & Fixing in repair plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device complete all as specified and directed. |
| 66 | Supply & Fixing in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including p'trap and provision of cement concrete for good making surface complete all as specified & directed .Makle Cera.or Equvalent make specified in List of Manufactures . |
| 67 | Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair complete all as specified and directed. |
| 68 | Supply and Fixing in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets complete all as specified and directed. |
| 69 | Supply & Fixing in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190x550x430mm including fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, complete all as specified and directed. |
| 70 | Supply & Fixing in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold”complete all as specified and directed. |
| 71 | Supply & Fixing in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 72 | Supply & Fixing in repair bib tap of PTMT any colour 15mm dia complete all as specified and directed. |
| 73 | Supply & Fixing in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. |
| 74 | Supply & Fixing for sink cock in repairs fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302 or Equvalent make specified in List of Manufactures . |
| 75 | Supply & Fixing in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed Cera Model F2002161 or Equvalent make specified in List of Manufactures . |
| 76 | Supply & Fixing in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 77 | Supply & Fixing for 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.Make : Modiguard/Atul/Govind |
| 78 | Supply & Fixing for PVC bathroom Cabinet mirror of size 500x400mm complete all as specified and directed. Make- Prayag Cat No-556 or Equvalent make specified in List of Manufactures . |
| 79 | Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed . |
| 80 | Supply and Fixing of 32mm waste pipe for wash hand basin complete all as specified and directed. |
| 81 | Supply & Fixing in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 82 | Supply & Fixing in repaiers CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange complete all as specified and directed. |
| 83 | Supply & Fixing for CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs complete all as specified and directed. |
| 84 | Supply & Fixing in repairs of CP health fauccet of Cera make including neccessary holding arrangements with screws etc complete all as specified and directed.Cera Make-F-8030103 or Equvalent make specified in List of Manufactures . |
| 85 | Supply & Fixing in repairs corner Glass shelf of cera make including neccessary holding arrangements with screws etc all as specified and directedCera Model F-5005102or Equvalent make specified in List of Manufactures . |
| 86 | Supply & Fixing for PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 87 | Supply & Fixing PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement complete all as specified and directed. |
| 88 | Demolition and breaking up drain pipes ( salt glazed ware , AC, PVC or reinforced conc ) set in cement mortar of internal dia 75-110mm incl any earth work and demolition of PCC, complete all as specified and directed. |
| 89 | Supply & Fixing in repairs PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 90 | Supply & Fixing in repairs PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed. |
| 91 | Supply & Fixing in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 92 | Supply & Fixing for PVC (SWR) bends 75 mm dia in any radius with access etc complete all as specified and directed. |
| 93 | Supply & Fixing for PVC (SWR) bends 110 mm dia in any radius with access etc complete all as specified and directed. |
| 94 | Supply & Fixing for PVC (SWR) branch piece single 110mm Dia (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc complete all as specified and directed. |
| 95 | Supply & Fixing in repairs CP grating size 100mm complete all as specified and directed. |
| 96 | Supply & Fixing in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed.Make :NIRALI,Blue star,Nilkhant or Equvalent make specified in List of Manufactures . |
| 97 | Supply & Fixing for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® omplete all as specified and directed. |
| 98 | Supply & Fixing in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm complete all as specified and directed. |
| 99 | Supply & Fixing for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of derlin with rope guide mounted on channel pair of length 24\\"(diatance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyster braided undyed of 3.5+0.50 mm dia complete all as specified and directed. |
| 100 | Supply & Fixing for Wall mounted stand consisting of four anodized, Aluminum pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30 x 30x3 mm , Model- Mount it 20-4 pipes, 5 ft each complete all as specified and directed. |
| 101 | Material & Labour for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and tne prelaminated side with different design and other side plain wihte of density not less than 600kg/cum the 18mm board should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity including all fitings complete all as specified and directed.(Make - BLACK COBRA /SMP IMPEX or Equvalent). |
| 102 | Supply & Fixing for Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. |
| 103 | Supply & Fixing for Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. |
| 104 | Supply & Fixing for Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. |
| 105 | Removing existing unserviceable tar felt or any type of any description from roof slab alongwith screed bed, cleaning the surface & removing the debries to a distance exc 250m and n.exc 500m from the starting point all as specified and as directed. |
| 106 | Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement.Note:- supply only of water proofing compound will be measured and paid seperately under relevant item |
| 107 | Supply only approved integral water proofing compound complete all as specified and directed.Make : conplast x 421 IC of M/s Fosroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd. |
| 108 | Material & Labour for Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 3mm thick APP modified water proofing membrane weighing not less then 3.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane. |
| 109 | Dismantling of plain or corrrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 110 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 111 | Supply & Fixing for steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all complete all as specified and directed. |
| 112 | Supply & Fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 113 | Supply & Fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender