Tender For E8 Tender Id-2026_Mes_Name Of Work: Repair / Replacement Of Chequered Tile Flooring/ Hardstanding, Plain Cement Concrete Paving Etc In Certain Qtrs Of Ora At Ina Ezhimala
Tender Value
35 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
21 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E8 Tender Id-2026_Mes_Name Of Work: Repair / Replacement Of Chequered Tile Flooring/ Hardstanding, Plain Cement Concrete Paving Etc In Certain Qtrs Of Ora At Ina Ezhimala
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar including disposal of debris at locations earmarked within the INA premises complete all a specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) including disposal of debris to a location earmarked within the INA complete all as specified and as directed. |
| 3 | Material & labour for 75 mm thick Cement concrete (1:4:8) mix Type D- 2 using 40mm graded stone aggregate as in sub floors. Sub bases, surfaces finished even and rough to receive the topping layer base of floors complete all as specified and as directed. |
| 4 | Material & labour for chequered cement concrete tiles 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 5 | Material & labour for Providing, cement concrete Type B1 1:2:4 (20mm graded aggregates) in flooring / kerbs or mud stops, rounded or chamfered on edges including use and waste of necessary formwork complete all as specified and as directed. |
| 6 | Material & labour for 100 mm thick PCC 1:2:4 mix Type B-1 using 20 mm graded stone aggregate as in floors and paving etc surface finished even and fair without using extra cement including use and waste of form work / screed strips and to divide the area in panels wherever required and finishing exposed edges fair or rounding or chamfering where directed complete all as specified and as directed. |
| 7 | Material & labour for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed. |
| 8 | Material & labour for 75 mm thick PCC 1:3:6 mix Type C-1 using 20 mm graded stone aggregate as in plinth protection surface finished even and smooth without using extra cement including use and waste of form work / screed strips and to divide the area in panels wherever required and finishing exposed edges fair or rounding or chamfering where directed complete including providing construction joints 10 mm wide filled with mixture of bitumen and sand in the proportion of (1:3) by weight complete all as specified and as directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed. |
| 10 | Supply & fix Mild steel Framed work such as grills, gratings, gates, railings etc. Using rolled steel sections or tubular sections of any description with ends of bars shouldered and / or riveted or welded, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, and similar work all as specified and as directed. |
| 11 | Material & labour for Preparation of new steel surface and applying two coats of Apcolite Rust Shield PU enamel paint over two coats of True care yellow metal primer of Asian paints or equivalent in Berger, Nerolac Paint Ltd as approved as per manufacturers instructions complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender