Housing Urban and Rular Development Government Departments Closing in 3 days TDR #57797412

Tender For Road Safety Work On Accident-Prone Locations Identified Under Pd Pwd Budaun By District Road Safety Committee In District Budaun.

Issued by Government Departments · Budaun, Uttar Pradesh
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
3 days left
EMD
25000
Bank guarantee accepted
Document Fee
679
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Budaun → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Road Safety Work On Accident-Prone Locations Identified Under Pd Pwd Budaun By District Road Safety Committee In District Budaun.

BOQ

Name of Work:- Road Safety Work on accident-prone locations identified under PD PWD Budaun by District Road Safety Committee in district Budaun.
Sl. No. Item Description
1Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type- IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for three year out door weathering test in Indian condition as per IRC 67-2012 and proof of the same in form of Govt. report shal be uploaded while quoting tender. (iii- 60 cm circular with diffinitation plate size (20cm.x60 cm.) .Speed Limit
2Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type- IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for three year out door weathering test in Indian condition as per IRC 67-2012 and proof of the same in form of Govt. report shal be uploaded while quoting tender. (X- 30cm.x90cm. left/Right Object Hazard) .
3Linear delineator system / Supply and fixing of linear delineator system (LDS) panels made of micro prismatic retro reflective sheeting type eleven duty laminated on thin aluminium foil to a unique corrugated safe to provide retro reflection across wide range of observations and external angle each LDC panels should be of nominal length of 33 inches and each ridge shall be approximately 0.34 inch high, each LDC panels is to be firmimg fixed on exciting concrete / brick work with 16 no fastener / screw( as per SOR LKO serial no 9 irc 79-2019)
4Providing and erection direction and indentifican retro-reflectorised sign as per IRC:67- 2012 made of high intensity grade sheeting . the retro reflective sheeting shall be forertificate of having the sheeting tested for coefficient of retro reflection daytime colour and luminanace shrinkage , flexibility, liner removal adhesion , impact resistance specular gloss and fungus resistance 3year outdoor wethering and its having passed these tests shall be obtained from international /Government laboratory institute by the manufacture of the sheeting nd in case the certificate is obtained from international condition its should also be obtained from indian condition within 3 years of launching from indian condition within 3 years of launching of product by the manufacture in broad Alternatively a certificate confirming to ASTM Specification ( D4956-09) on artificial accelerated weathering requirements from reputed laboratory in india can be accepted provisionaly in such a situation the Employer /client if so desire could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three yearss outdoor weathering of the sheeting s per IRC 67-2012 Legends , letters , numerals and borders etc should be s per MoRTH specification no- vide clause 801.3, Sheet Fixed over aluminum sheeting 2 mm thick with area not exceeding 0.90Sqm supported on a mild Steel Single angle iron post 75x75x6mm firmly fixed to the ground by means of property designed foundation with with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Complete (Direction and place Identification sign with size up to 0.90sqm size board) .(SCH LKO CH 29)
5Reflective raised pavement marker providing and Fixing of raised pavement marker (cat eye) type x-ASTMD -4956-04 avery dennision /3M (USA MAKE)having Moulded body of polycarbonate,ASA HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirements mentioned in MORT& H circular its reflective lens made of micro prismetic lens(capable of providing total internal reflection of light),electronically welded to the body the length , height and width of the body shall not exceed 130 mm, 20 mm and 105mm respectively, the area of each reflected surfaceshall not be less than 13 sqcm on each side stopping at the angle of 35+/-5 degree to the base to ensure maximum reflectively , it shall comply to specification of catagory A MORTH circular No. RW/NH/33023/10-97-DO III dt. 11.06.1997.lenses shall be moulded of methyl methecrylate confirming to ASTMD 788 or equvalent with 7 years warranty, (Sor 2018 Chapter 27 S no. 8 New Item Meerut )
6Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqmtr area thicness of 2.5.. In exclusive of surface applied glass beads as per IRC:35. The finish surface to be level, Uniform and free from streaks and holes. As per SOR Lucknow Chp. 26 SN 2 (Morth 803 (8.13) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57797412
AUTHORITY Government Departments
TENDER VALUE 2.50 Lakhs
LAST DATE 08-10-2026
Authority
Authority Name Public Works Department
Work Description Tender for Road Safety Work On Accident-Prone Locations Identified Under Pd Pwd Budaun By District Road Safety Committee In District Budaun.
Basic Detail
Tender No 2848(2)/Nivida/2026-27 Dt 15/09/2026
Bidding Type Tender
Location
City Budaun
State Uttar Pradesh
Key Dates
Publish Date 30 Sep 2026
Submission Date 08 Oct 2026
Open Date 08 Oct 2026
Finance
Tender Value 2.50 Lakhs
Tender Fee 679
EMD 25000
Exemption Available
Document List
BOQ_2247718.xls
fc1f7b14-3320-4eac-985a-06b8d6c9d2d0.html
T1.pdf
Tendernotice_1 (79).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Oct 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2247718.xls

html

fc1f7b14-3320-4eac-985a-06b8d6c9d2d0.html

pdf

T1.pdf

pdf

Tendernotice_1 (79).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders