Tender For General-Rm 2026-27-Rc 2, One Year Running Contract For Various Pwd Roads Under Roads Section Mattancherry In Ernakulam District 12 Roads Stretches For A Length Of 36.180 Km-Rc Work-General Civil Work-General Civil Work
Tender Value
42.10 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Rm 2026-27-Rc 2, One Year Running Contract For Various Pwd Roads Under Roads Section Mattancherry In Ernakulam District 12 Roads Stretches For A Length Of 36.180 Km-Rc Work-General Civil Work-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Reactive maintenance (Initial Rectification) |
| 2 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 3 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 4 | 10.5.1b:Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting trimming and finishing the surface to from a smooth continuous surface, all as per clause 3004. 2 Filling Port holes and Patch Repairs with Bituminous concrete For grading II- 13 mm (Nominal size) Material |
| 5 | Pre Monsoon Work |
| 6 | OD26592/2026-2027:Filling up potholes with readymixed bituminous compound (25kg bag) and compacting by ramming to get a compact surface including cost of material, laying charges, transportation to site etc. complete (rate is arrived for a bag of 25kg) |
| 7 | OD26591/2026-2027:Engaging mazdoor for lowering side berms, clearing side berms, clearing side drains, removing silt from culverts, cutting earth drains, diverting blocked water, removing the branches of trees laned towards the road threatening pedestrians and traffic and removal of fallen trees or branches on road clearing traffic blockage , stack the wood at suitable place and various works as directed by engineer in charge etc. |
| 8 | OD26597/2026-2027:Engaging wood cutter for removing dangerously standing trees and dangerously overhanging branches of trees etc. |
| 9 | OD26595/2026-2027:Hiring chainsaw with motor for wood cutting |
| 10 | OD26593/2026-2027:Engaging mobile crane with all accessories |
| 11 | OD26596/2026-2027:Hire charges of front end loader for removing debris and unwanted materials from roadway |
| 12 | OD26594/2026-2027:Arranging Tipper truck for transportation of Timber for disposing at dumping yard |
| 13 | 8.4.2:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 60 cm equilateral triangle |
| 14 | 8.4.3:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 60 cm circular |
| 15 | 8.4.4:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 80 mm x 60 mm rectangular |
| 16 | 8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. |
| 17 | 8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes. |
| 18 | 8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :- |
| 19 | Proactive/Preventive Maintenance |
| 20 | OD26587/2026-2027:Conduction and reporting routine inspection for the entire length of the project road at a frequency of 7 days through out the agreement period of the running contract as directed by the deptl. officers at site. Additional RI may be required in response to reports, or complaints from police, other authorities and the public as result of major incidents, typhoon or flooding damages, etc, and are not measurable/payable. A proportion of RI should be carried out either during or immediately following a period of wet weather. |
| 21 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 22 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 23 | OD26586/2026-2027:Engaging wood cutter for cutting trees and branches standing in dangerous condition |
| 24 | OD26589/2026-2027:Engaging mazdoor for lowering side berms, clearing side berms, clearing side drains, removing silt from culverts, cutting earth drains, diverting blocked water, removing the branches of trees laned towards the road threatening pedestrians and traffic and removal of fallen trees or branches on road clearing traffic blockage , stack the wood at suitable place and various works as directed by engineer in charge etc. |
| 25 | OD26585/2026-2027:Engaging mobile crane with all accessories |
| 26 | OD26583/2026-2027:Hire charges of Front end loader for removing debris and unwanted materials from roadway |
| 27 | OD26584/2026-2027:Hiring chainsaw with motor for wood cutting |
| 28 | OD26590/2026-2027:Arranging Tipper truck for transportation of Timber for disposing at dumping yard |
| 29 | 12.1.B.1:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means |
| 30 | 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 31 | 12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer |
| 32 | 12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications |
| 33 | 55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete |
| 34 | 10.5.1b:Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting trimming and finishing the surface to from a smooth continuous surface, all as per clause 3004. 2 Filling Port holes and Patch Repairs with Bituminous concrete For grading II- 13 mm (Nominal size) Material |
| 35 | Emergency Works |
| 36 | OD26599/2026-2027:Engaging mazdoor for lowering side berms, clearing side berms, clearing side drains, removing silt from culverts, cutting earth drains, diverting blocked water, removing the branches of trees laned towards the road threatening pedestrians and traffic and removal of fallen trees or branches on road clearing traffic blockage , stack the wood at suitable place and various works as directed by engineer in charge etc. |
| 37 | OD26602/2026-2027:Engaging wood cutter for cutting trees and branches standing in dangerous condition |
| 38 | OD26600/2026-2027:Hiring chainsaw with motor for wood cutting |
| 39 | OD26601/2026-2027:Hire charges of Front End loader for removing debris and unwanted materials from roadway |
| 40 | OD26598/2026-2027:Arranging Tipper truck for transportation of Timber for disposing at dumping yard Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender