Tender For Construction Of Mahila Hut/ Kiosks Under R Scheme, Sri Muktsar Sahib
Tender Value
12.41 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
7 days left
EMD
24825
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sri Muktsar Sahib → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mahila Hut/ Kiosks Under R Scheme, Sri Muktsar Sahib
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in Charge. |
| 3 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 4 | Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type. |
| 5 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. |
| 6 | Reinforced cement concrete M-20 mechanically volumetric mixed using volumetric type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 7 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). |
| 8 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 9 | Reinforced cement concrete M-20 mechanically Volume mixed using volumetric type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 10 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 11 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 12 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. |
| 13 | 12.5 mm thick cement plaster 1:4 |
| 14 | 20mm thick cement plaster 1:4 in two coat work |
| 15 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm. |
| 16 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm. |
| 17 | Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 18 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) |
| 20 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. |
| 21 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 22 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 23 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend. |
| 24 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16. |
| 25 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats |
| 26 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required. |
| 27 | Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. |
| 28 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. |
| 29 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect. 8.0mm thick Plate glass(weight not less than 20 kg/ sqm). |
| 30 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). For shutter area above 0.50 sqm. |
| 31 | Providing and Fixing ceiling at height upto 4 mtr consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. |
| 32 | Providing and fixing mineral fibre false ceiling tiles at height upto 4 mtr of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm. |
| 33 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats). |
| 34 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm. |
| 35 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. |
| 36 | Providing and Fixing PVC Panelling complete in all apsect. |
| 37 | Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed). |
| 38 | Providing and fixing ball bearing for push and pull type rolling shutters, from 9.20 to 12 sqm area. |
| 39 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres. |
| 40 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. IS Code:15658 (2006). |
| 41 | Providing and fixing Wall Mounted Display Racks: 3' X 8' Mild Steel Rack type: Free Standing unit with PVC Bidding or Metal ( Load Capacity 50- 60kg per shelves complete in all aspect. |
| 42 | Extra Pillar (Channel) for Racks. |
| 43 | Stainless Steel Four Way stand for Clothes complete in all aspect. |
| 44 | Provision for Branding Complete in all aspect. |
| 45 | Internal Electrical Installations |
| 46 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 47 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 48 | Wiring fan point (With fan box) |
| 49 | Wiring light point |
| 50 | Wiring 6Amp. wall socket point |
| 51 | Wiring 6Amp. Plug control comprising wall socket point |
| 52 | Wiring 16Amp. power plug control point |
| 53 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 54 | Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 55 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 56 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 57 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 58 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 59 | Overall size 1.5sq.mm (Un-sheathed) |
| 60 | Overall size 2.5sq.mm (Un-sheathed) |
| 61 | Overall size 4sq.mm (Un-sheathed) |
| 62 | Overall size 10sq.mm (Un-sheathed) |
| 63 | Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 64 | Supply and erection of BEE 3-Star rating AC Ceiling Fan 1200mm (48\\") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 210 CMM (approx.). The rated speed of the the product must be minimum of 300 revolutions per minute and 5Nos. of speeds. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. |
| 65 | Supply and erection of Receesed Mounted 36Watt LED Panel (including constant LED driver) with CRCA sheet efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 66 | Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 67 | Supply and erection of 500 Litre Capacity Double Door Deep Freezer with 4 Year Complete Warranty complete in all respect as approved and desired by the Engineer in-charges at site. |
| 68 | Supply & erection of Single phase Pure Sine Wave Inverter, Output Power- 900 Watts. Rated Capacity- 1125 VA; Efficiency (Battery Mode) > 80% ,Frequency: 50 Hz x 50 Hz, input voltage (standard range) 100 v - 300 v; Charging Current (Standard) : 10 Amps ± 1 Amps,Protection- OverVoltage, OverCurrent, ShortCircuit and Narrow Voltage Range from 180V~260V, intergrated cooling- Fan, operted with 1 no. Battery ( included) 200Ah suitable for charging 12 Volts DC power backup including petty material cables, connection & testing charge etc. with 2 year warranty period complete in all respect as desired by the Engineer In Charge. |
| 69 | Providing CCTV System |
| 70 | Supply, Installation, Testing & Commissioning of 4-Channel Network Video Recorder (NVR) Support up to 4 channels IP video input, H.265+/H.265 compression, Max 4K/8MP resolution recording, 1 SATA interface (up to 4TB, 1 HDMI & 1 VGA simultaneous output, 10/100 Mbps Self-adaptive Ethernet interface. complete in all respect as desired by the engineer in charge at site. |
| 71 | Supply, Installation, Testing & Commissioning of 4MP IP Network Dome Camera, Lens 2.8mm. complete in all respect as desired by the engineer in charge at site. |
| 72 | Supply, Installation, Testing and commissioning of 4MP IP CCTV Bullet Camera. complete in all respect as desired by the engineer in charge at site. |
| 73 | Supply, Installation, Testing and commissioning of 4+2 Port PoE Switch (10/100 Mbps) 4 × 10/100 Mbps PoE ports, 2 × 10/100 Mbps Uplink ports, IEEE 802.3af/at standard compliant, Total PoE power budget min. 60W, Support Extend mode up to 250m transmission. complete in all respect as per instruction of engineer in-charge. |
| 74 | Supply, Installation, Testing & Commissioning of PVC CCTV Box (5\\" × 5\\") High-quality weatherproof PVC/ABS material, Size 5×5 inches, Joint box for outdoor camera connectors protection, Dust-proof and moisture-proof. |
| 75 | Supply, Installation, Testing & Commissioning of 6U Network Rack (400 × 400) Wall mount 6U Rack, Dimensions 400mm Depth × 400mm Width, Front glass door with lock, Tough powder-coated finish, Cable entry cut-outs at top and bottom, includes 1 PDU (Power Distribution Unit) & mounting accessories. complete in all respect as desired by the engineer in charge at site. |
| 76 | Supply and Installation, Testing & Commissioning of Surveillance Hard Disk Drive (1 TB HDD)3.5-inch Internal Hard Drive optimized specifically for 24/7 continuous surveillance workloads, SATA 6 Gb/s interface, Buffer size 64MB, Supports All Frame technology to reduce video frame los complete in all respect as desired by the engineer in charge at site. |
| 77 | Supply, Installation, Testing and Commissioning of 32\\" LED Display Monitor32-inch Slim LED Screen, Full HD/HD Ready resolution, Inputs: 1x HDMI, 1x VGA, Audio Out, Designed for continuous monitoring application with wide viewing angles. complete in all respect as desired by the engineer in charge at site. |
| 78 | Supply, Installation, Testing and Commissioning of HDMI Cable (5 Meter) High-Speed HDMI cable male-to-male with gold-plated connectors, supports 4K/Ultra HD resolution at 60Hz, Triple shielding to prevent signal degradation over 5 meters. complete in all respect as desired by the engineer in charge at site. |
| 79 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 80 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 81 | Supply and Erection of CAT 6 with 23 AWG solid bare conductor,special grade PE insulation with star separtor , 4pair Unshielded Twisted pair (UTP) industrial cable, FR PVC Sheathed,Class E 250MHz of Bandwidth, Supporting data Transfer speed Up to 10Gbps (10GBASE-T) For Distance up to approximately 180 feet, Cables are manufactured and Tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E Standards left bare in pipe or Cassing of Suitable size Complete in all respect as desired by Engineer -in-charge. |
| 82 | Public Health Charges |
| 83 | Sub Work-1 Internal Sewerage System |
| 84 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B |
| 85 | 110mm o/d SWR UPVC pipe lines laid complete |
| 86 | 90mm o/d SWR UPVC pipe lines laid complete |
| 87 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 88 | For 110mm i/d pipes |
| 89 | Elbow 100 Degree (All side socketed) |
| 90 | P Trap/Floor Trap 110mm x 110mm |
| 91 | For 90mm o/d pipes |
| 92 | Elbow 90 degree (all side socket) |
| 93 | Single Tee |
| 94 | Vent Cowls |
| 95 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) |
| 96 | 110mm o/d |
| 97 | 90mm o/d |
| 98 | C.conc. 1:2:4 with stone ballast or shingle mixing by manual means |
| 99 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 100 | 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 101 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 102 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg.and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 103 | Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5mm of the approved design for fixing C.I. soilwaste, vent or anti syhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc.and painting. |
| 104 | M.S. Holder bats clamps for 100mm i/d H.C.I. pipes |
| 105 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 106 | Through wall 22.86 cm thick |
| 107 | Sub Head-2 Internal Water Supply System |
| 108 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 109 | SDR 11 CPVC pipes & fittings 20mm o/d |
| 110 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 111 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm |
| 112 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 113 | Through wall 11.43 cm thick |
| 114 | Through wall 22.86 cm thick |
| 115 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS1879 in G.I. Pipelines complete in all respect |
| 116 | 25mm i/d GI Union |
| 117 | Providing, fixing and jointing ISI Marked Gun Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipelines laid in the ground or inside buildings including all carriages complete |
| 118 | 25mm i/d Gun Metal peet valve heavy pattern. |
| 119 | Sub Head - 3 Sanitary Installation |
| 120 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 121 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. |
| 122 | With PTMT nut |
| 123 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 124 | Size 550 mm x 400 mm x 815mm |
| 125 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 126 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) withwaste coupling complete in all respect |
| 127 | Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm |
| 128 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 129 | C.P brass towel ring |
| 130 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 131 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm) |
| 132 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 133 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long |
| 134 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 135 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 136 | PTMT Tap/Bib cock |
| 137 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 138 | C.P.brass 15mm Concealed stop cock with flange.. |
| 139 | PTMT 15mm Angle valve |
| 140 | Providing & Fixing in postion liquid soap containerofapprovedmake(totheapproval of Engineer-in-charge ) complete in all respect |
| 141 | Acrylic liquid soap container |
| 142 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut |
| 143 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 144 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks |
| 145 | 1000 ltr Capacity |
| 146 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 147 | Brass Ball Cock with rod and Plastic Ball 32mm i/d |
| 148 | Providing and fixing in position cPVC. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 149 | 25mm i/d Cpvc Tank Nipple |
| 150 | Sub Head-4 Flooring and Wall Tile |
| 151 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material |
| 152 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete . |
| 153 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 154 | Sub Head-5 Air conditioner |
| 155 | Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 4 Star or above Make ISI marked or its equivalent with 5.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges including 3 meter copper pipe complete in all respects |
| 156 | Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/ 9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects. |
| 157 | Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe Type A with G.I. specials as per ISI-4985:2021, including cost of G.I.specials such as tees, bends, sockets, elbows etc. testing inside building complete.uPVC Pipe 6 Kgf/cm2 = 40mm i/d |
| 158 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 159 | Through wall 22.86 cm thick |
| 160 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 161 | Overall size 2.5sq.mm (50/0.25mm), 3Core |
| 162 | For 2 tonne split AC |
| 163 | Sub Head-6 Tube wel & Mono Block Pump |
| 164 | Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. |
| 165 | Boring with 150mm id Housing Pipe Upto 150 mtr depth BGL |
| 166 | Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – in-charge. |
| 167 | 100 mm nominal size dia. |
| 168 | Supplying, assembling, lowering and fixing in vertical position in bore well un-plasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 169 | 100 mm nominal size dia. |
| 170 | Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. |
| 171 | 100mm internal diameter |
| 172 | Providing & Fixing of Bail Plug |
| 173 | Supply, installation & commissioning of ISI marked 1.00 HP Electrical Motor for lifting of water head 35 Mtr. With suction left 10 Mtrs & discharge 50 to 120 LPM |
| 174 | Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. |
| 175 | Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect. |
| 176 | Supplying and fixing mild steel centering guides made out of 32mm x 6mm thick M.S. bar complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender