Tender For Annual Maintenance Of The Staff Quarters In The C Us Of Bidyadhari Drainage Division Office At Barasat In The District Of North 24 Parganas For The Year 2026-2027.
Tender Value
2.04 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
11 days left
EMD
4087
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Of The Staff Quarters In The C Us Of Bidyadhari Drainage Division Office At Barasat In The District Of North 24 Parganas For The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Taking out door and window shutters and recharging the same with old fittings. (a) With new iron screws. Door |
| 2 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m |
| 3 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.(a) (iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak |
| 4 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. |
| 5 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degrees on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in Charge. |
| 6 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided throughout the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. |
| 7 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.100 mm. X 75 mm. X 3.50 mm. |
| 8 | (iv) 75mm. X 47mm. X3.15mm |
| 9 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iii) 300mm x 16mm dia. Bolt |
| 10 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:225 mm long x 10 mm dia. bolt. |
| 11 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 12 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surfaceWith other than hi-gloss of approved quality(iv)Two coats (with any shade except white) |
| 13 | (a) On steel or other metal surface:With other than hi-gloss of approved quality(iv)Two coats (with any shade except white) |
| 14 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous China ware of approved make complete in position with necessary bolts, nuts etc.(b) With 'P' trap (with vent) |
| 15 | Supplying, fitting and fixing 10 litres P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete. brackets including two coats of painting to bracket etc. |
| 16 | Dismantling wash basin with brackets with or without waste fittings. |
| 17 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.450 mm long |
| 18 | Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm long |
| 19 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) – Multilayer(d) 2000 litre capacity |
| 20 | Dismantling E.P. or Anglo-Indian W.C. |
| 21 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992A) (i) Single Socketed 3 Meter Length(a) 75mm |
| 22 | (b) 110 mm |
| 23 | xvi) Pipe Clip(b) 110 mm |
| 24 | a) 75 mm |
| 25 | x) Bend 87.5º(b) 110 mm |
| 26 | v) Plain Y110mm |
| 27 | (ii) Plain Tee75mm |
| 28 | 110mm |
| 29 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. (A)(I) CPVC Pipes Class-1,SDR-11(a) For Exposed Work15mm dia |
| 30 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii) 550 mm X 400 mm size |
| 31 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 32 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 33 | Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.b) Slab Thickness above 25 mm and upto 37.5 mm |
| 34 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.630 mm X 550 mm X 180 mm |
| 35 | Supplying, fitting and fixing bib cock or stop cock(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 36 | (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm |
| 37 | Supply and delivery of direct on line ( DOL) strater panel board conforming toISl3947 and IEC 947 of suitable HP rating for operation in 230V (+10%) AC,single phase, 50HZ(+5yo) comprising of ammeter, voltmeter, thermal overloadrelay,2 pole magnetic contactor, under voltage protection, indicating lamp,capacitors, on/off push buttons including 5 way connector, wiring with l/1.5 sq.mm PVC insulated copper wire, powder coated vermin proof box of followingcapacities:-ii) 1.5 H.P. (Relay Range 9-14 Amp.) |
| 38 | Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type)(i) 450 mm dia. |
| 39 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(b) Upto 30 users:-ii) Beyond a lead of 150 metre and outside the Municipal limit |
| 40 | Cleaning silt of inspection pit. |
| 41 | Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir.11nos water tank Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender