Tender For Upgradation Of Kitchen In Bldg No P-30 (A Or Mess) And Provn Of Parking Tiles Under Age B/R-I & Age B/R-Ii At Mil Stn Yol
Tender Value
16.50 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
22 days left
EMD
33000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Kitchen In Bldg No P-30 (A Or Mess) And Provn Of Parking Tiles Under Age B/R-I & Age B/R-Ii At Mil Stn Yol
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. |
| 2 | M&L for Hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed |
| 3 | M&L 75mm PCC, M-10 (Nominal Mix) type C-2 (using 40mm graded crushed stone aggregates) as in sub base flooring finished even and fair without using extra cement, complete all as specified and directed . |
| 4 | 25mm thick PCC (1:2:4) type B1 using 20mm graded crusshed stone aggregate as in floor finished even and rought to received the topping layer complete all as specified. |
| 5 | Parking tiles 10mm to 12mm thick ,glossy/mat finish, double charged heavy duty (Square or rectangular) of area of each tile exc. 0.42 Sqm but not exc. 1.00 Sqm of approved design, shape and shade set and jointed in neat cement slurry laid over and including 15mm thick screed bedding layer in cement mortar 1:6 , including necessary cutting and waste as per site requirement, complete all as specified and directed by Engr-In-Charge. Note:- The size, shade and design will be approved by GE. Make : ENDURA , JHONSON or as approved by the GE. |
| 6 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge |
| 7 | Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase, complete all as specified and directed. Note:- Kota stone shall be laid as a single piece in riser, steps, tread or in floors complete all as specified and directed by Engineer by Charge. |
| 8 | Dismantling floor,hearth or wall tiling incl cement morter bedding ( but not backing), removing seviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer by Charge. |
| 9 | Glazed coloured tiles of size 450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary cutting, complete all as specified and directed. |
| 10 | Machine cut kota stone slab 18mm to 20mm thick as in riser of steps, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick rendering in cement mortar 1:4, cutting, rubbing, grinding and polishing to achieve mirror finish complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 12 | 10 mm thick rendering in cement mortar 1:3 on ceiling surfaces finishes the surface evan and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 14 | Taking down chowkhat with shutter exc. 1.50 Sqm but n. exc 4 Sqm but with shutters (without taking off shutters from the frame) and removing from site complete all as specifed and directed. |
| 15 | Natural colour 15 micron anodized powder coated aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM.b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM.c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM.d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM.e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm.(f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-I using 12.5 mm graded crushed stone aggregate to fix hold fasts all as directed. |
| 16 | Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed. |
| 17 | 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed by Engr-In-Charge. |
| 18 | M&L for preparation of new wooden surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 19 | Natural colour 15 micron sliding three track anodized aluminium powder coated window with chowkhat of approved design complete all as directed with all fixing arrangements (including providing and fixing window handles, tower bolts and provision for fixing lock) including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a)Shutter vertical member, size varying from 40 x 20.0 x 1.00mm (weighing 0.313 Kg/RM) to 50.80 x 25.40 x 1.09 mm (weighing 0.489 Kg/RM).(b)Shutter top & bottom member, size varying from 40 x 20.0 x 1.00mm (weighing 0.313 Kg/RM) to 50.80 x 25.40 x 1.09 mm (weighing 0.489 Kg/RM).(c) Natural colour 15 micron anodized aluminium anodised powder coated frame of chowkhat (including track of suitable size) of section varying from 83.5 x 44.45 x 1.80 mm (weighing 1.302 Kg/RM) to 104 x 44.45 x 1.80 mm (weighing 1.60 Kg/RM), with flat iron hold fasts and necessary concrete to fix hold fasts all as directed.(d) 5.50mm thick tinted glass fixed with alumnium beading, silicon lining and gaskets complete. (e) The size of anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and anodised aluminium tower bolt of size 100mm (02 Nos). |
| 20 | Aluminium handles cast type anodized of size 150 mm complete all as specified and directed. |
| 21 | Aluminium anodized barrel tower bolt of extruded section of size 200 mm and fixed complete all as specified and directed. |
| 22 | 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 23 | Taking down steel water tubing 15 mm bore including all fitting and connections complete all as specified and directed. |
| 24 | Taking down steel water tubing 20mm bore including all fitting and connections complete all as specified and directed. |
| 25 | Taking down steel water tubing 25mm bore including all fitting and connections complete all as specified and directed. |
| 26 | G I tubing medium grade of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed. |
| 27 | G I tubing medium grade of 20mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed. |
| 28 | G I tubing medium grade of 25 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed. |
| 29 | Dismantling water tanks exc. 500 ltr & n exc 1000 ltrs capacity and removing from site complete all as specified and directed.. |
| 30 | S & F rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, all as specified. |
| 31 | S&F for Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified. |
| 32 | Taking down existing water proofing treatment( if any) including cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish and apllying 15 mm thick (average) screed bed/ plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete, all as specified and directed. (Note:- WPC and polymeric membrane shall be measured and paid separately) |
| 33 | APP (Atactic Poly-propylene polymer) modified membranes, five layered, 4 mm thick weighing not less than 4.0 kg/ Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 kg per sqm on the bottom of APP and on top of joints of APP complete all as specified. |
| 34 | Dismantling of CI/PVC pipe 75/100 mm bore fixed to wall or laid in floor or trenches inculding connection all as specified and directed. |
| 35 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete, all as specified. |
| 36 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or in floors of bore 75mm, in repairs complete, all as specified. |
| 37 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints, fixed to walls of bore 110mm, in repairs complete, all as specified. |
| 38 | S&F for PVC (SWR) bend any radius, 110mm bore, fixed in repairs complete all as specified. |
| 39 | S&F for PVC (SWR) bend any radius, 75mm bore, fixed in repairs complete all as specified. |
| 40 | PCC 1:4:8 (nominal mix) type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed. |
| 41 | PCC 1:3:6 ,Type C2, using 40mm graded crushed stone aggregate as in surface chanel and drains including use of form work complete all as specified and as directed. |
| 42 | Extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed by Engineer in Charge. |
| 43 | M& L 20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking or WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. Note: The size,shade and design will be approved by GE. |
| 44 | Rounding to edges of stone/kota/marble/granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer in Charge. |
| 45 | Demolition of stone/boulders or brick masonary built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified. |
| 46 | M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 47 | Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 and finished surface even and smooth without using extra cement (Internal surfaces) complete all as specified and directed by Engineer in Charge. |
| 48 | Earth work in excavation by mechanical means Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out in all kind of soil excavated soil and disposal of surplus excavated soil, within a lead of 50m complete all as specified and directed. |
| 49 | M&L for 75mm thick PCC 1:3:6 Type C2 (Using 40mm graded crushed stone aggregates) for padding in floors/roof finished even and smooth surface without using extra cement complete all as specified and as directed. |
| 50 | M&L for Mild steel framed work such as grills of windows, gratings, tank staging etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified. |
| 51 | M&L for Preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 52 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. |
| 53 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 54 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender