Tender For Improvement Work In Vts Tower & Allied Buildings At Balachadi Vts Station
Tender Value
74.08 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
1.48 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Work In Vts Tower & Allied Buildings At Balachadi Vts Station
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Oct-2026 | date extension 1 | Date | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 2 | Dismantling tile work in VTS tower floors and wherever required laid in cement mortar including stacking material within 50 metres lead as per direction of Engineer-in-charge including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal/village dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved all other charges etc. complete |
| 5 | Reinforced cement concrete work in R.C.C. works slabs and wherever necessary 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc., including cost of centering, shuttering, finishing and excluding reinforcement, including supply of all materials, labours, tools & plants,curing and all other charges complete etc. |
| 6 | R.C.C. slab / Railing Base box and wherever necessary |
| 7 | Supply, fabrication, hoisting and placing in position HYSD reinforcement bars (SAIL/ TATA/ IISCO / RINL/ JINDAL/ Kamdhenu etc.) conforming to IS 1786 - latest edition Grade FE 415 / 500 D or more as per detailed drawing and specifications including cutting, bending and tying with 18 SWG binding wire complete for all heights and depths as directed etc. complete including supply of all labours, tools, materials etc. complete as directed by the engineer in charge. |
| 8 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC walls, beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. For slab under VTS tower floor and wherever required |
| 9 | Kota stone slab 25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand), Including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge.complete. |
| 10 | Providing and fixing 18mm thick gang saw cut mirror polished / ( or flamed as site requirement) premoulded and prepolished, machine cut for steps, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade area of slab over 0.50 sqm |
| 11 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades laid on 20mm thick bed of Cement Mortar 1:4(1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. |
| 12 | Providing and fixing 8mm thick Glass/transparent polycarbonate sheet in circular glazing of VTS tower at 45.00mtr/57.00mtr level balcony including the cost of dismantling broken glass carefully, fixing, filling joints with silicon, cutting, welding, and all materials, labours, tools& plants, scaffolding lifting &shifting of hiegh rise tower, all other charges etc., complete. |
| 13 | Removing of glass panes from 45mtr/57mtr level including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower, lifting &shifting of hiegh rise tower all other charges etc.complete. |
| 14 | Dismantling steel work in built up sections in angles, tees, flats and channels with all gusset plates, bolts, nuts, cutting rivets, welding, dismantling and stacking within 50 metres, as directed & as described as per condition at site including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower, lifting &shifting of hiegh rise tower all other charges etc.complete. |
| 15 | Providing and fixing aluminium work for Circular glazing level of 45mt / 57mt on VTS Towerwith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete. Powder coated aluminium (minimum thickness of powder coating 50 micron) For EPDM Rubber not any Extra payment |
| 16 | Providing and fixing glass panes of 8mm thickness (Weight not less than 20 kg/sqm) in circular glazing of VTS tower at 47.00mtr level balcony with EPDM rubber/neoprene gasket etc. complete including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete. |
| 17 | Providing and fixing wiremesh to aluminium ventilation work for Circular glazing level of 45mt and 57mt on VTS Tower in window section including wire mesh supplying fixing and all other charges etc. complete. |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm in cement mortar 1:4 (1 cement : 4 coarse sand ) on wall surface, ceiling etc. after removing old plaster - damaged/ crack plaster of the patch 2.5 sq.meter and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, ceiling complete including cost of all materials, labours, disposal of the rubbish to the dumping ground, all complete as per direction of Engineer in-Charge including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 19 | 12mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) for Celling plaster, Including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge. |
| 20 | Painting two coats with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete on outer surface of 60m height VTS Tower. |
| 21 | Painting two coats with premium acrylic emulsion paint Inside VTS tower surface (BergerAsian/brand) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete on inner surface of 60m height VTS Tower |
| 22 | Finishing with Epoxy paint (two or more coats) in VTS Tower basement prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on steel galvanised iron/ steel works-Steel surface including the cost of all materials,labours, tools& plants, and all other charges etc., complete.on work of suitable shade with ordinary paint of approved brand and manufacture including the cost of all materials, labours, tools & plants , scaffolding etc., complete. |
| 24 | Applying priming coats With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 25 | VTS Tower Inside Stair Case Hand Railing |
| 26 | VTS Tower Hand Railling Outer side |
| 27 | VTS Tower MS Ladder |
| 28 | VTS Tower Trap door |
| 29 | C I Cover |
| 30 | Paint to MS Main gate |
| 31 | Street Light |
| 32 | HSD Tank |
| 33 | MS ladder & Hand railing of O H tank |
| 34 | Kerb wall & Electric pole foundation painting Work |
| 35 | Painting two coats with synthetic enamel paint on existing work on existing surface including the cost of all materials, labours, tools, scaffolding& plants and all other charges etc., complete. |
| 36 | VTS Tower Inside Stair Case Hand Railing |
| 37 | VTS Tower Hand Railling Outer side |
| 38 | VTS Tower MS Ladder |
| 39 | VTS Tower Trap door |
| 40 | C I Cover With Frame |
| 41 | Paint to MS Main gate |
| 42 | Street Light |
| 43 | HSD Tank |
| 44 | MS ladder & Hand railing of O H tank |
| 45 | Kerb wall & Electric pole foundation painting Work |
| 46 | Repairs to existing C.C pathways, Plinth Protection,kerb wall or wherever necessary with cement concrete 1:2:4 ( 1 cement : 2 river sand : 4 stone aggregate of 20 mm nominal size) after dismentaling & removing damaged portion , cleaning watering including the cost of all labours, materials, tools & plants and other charges etc. complete |
| 47 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 48 | Removing dry or oil bound Plastic/Distemper emulsion paint/putty from wall surface and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches as directed including cost of supply of all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. |
| 49 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as directed & as described as per condition at site including the cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 50 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre,as directed & as described as per condition at site including the cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 51 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, Including the cost of all materials, labours, tools & plants, scaffolding etc., complete. |
| 52 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including the cost of all materials, labours, tools & plants , scaffolding etc., complete. |
| 53 | Finishing walls with Acrylic Smooth exterior paint of required shade. Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface as per direction up to floor three levels approved quality and colour to give on even shade after scrapping, wire properly & then cleaning the cement painting spots on the floors, furnitures, doors & windows etc of the building after painting , removal and placing of all the items in existing position as directed including cost of supply of all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. |
| 54 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 55 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 56 | Dismantling / Removal carefully without damaging the fittings and fixtures W.C./Wash basin/Urinals with all its unit likeof flushing cistern of all types (C.I./PVC/Vitrious China) including disposal of materials from station, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 57 | Dismantling W.C. Pan of all sizes including disposal from station of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge |
| 58 | Dismantling G.I. /C.P.V.C./A.P.V.C./P.V.C. pipes (Internal/external work) with its fittings sanitary/Sewage fittings including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including disposal from station as per direction of Engineer-in-charge : including bibcock, pillar cock, sink cock, angle valve, stop cock, shower, health faucet etc. all bath- Toilet- urinal fittings. |
| 59 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal/village dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved all other charges etc. complete As against item no.28,29 & 30 |
| 60 | 15 mm cement plaster on rough side of exterior or interior plaster work in ratio of plaster 1:3 including all tools plants, labour and material. |
| 61 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 62 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 63 | Providing and fixing Ist quality ceramic glazed (300mmx450mm)wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 64 | Providing and fixing 10mm thick of full body vetrified tiles in various finish of 600mmx600mm size ( Swastika/Marbito or their equivalent) as per details ,in floor of approved make and of approved colour of first quality, even shade, set in cement slurry over minimum 50mm thick cement morter 1:3 laid to proper slope,line and level, as specified including using white cement with or without colour mixing as per shade of approved quality in pointing of joints also joint fill with acrylic grout filler and applying neat cement paste about 3kg per sqm, curing and cleaning complete as directed by engineer-in-charge. |
| 65 | Providing and fixing 18mm thick gang saw cut mirror polished/or flamed as site requirement premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade area of slab over 0.50 sqm |
| 66 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, W.C. pan with ISI marked white solid plastic seat and lid, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 67 | Providing and fixing white vitreous china pedestal type water closet (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-Charge. including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 68 | Orissa pattern W.C. pan of size 580 x 440 mm ( Inidan W.C.) |
| 69 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 70 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510 mm bowl depth 200 mm. |
| 71 | Replacement of unserviceable/damaged low level cistern 10litre capacity of approved quality and making connections of inlet, outlet with EWC/IWC including disposing the unserviceable materials from the site. Supply of all materials, labour,tools, etc. complete. |
| 72 | Supplying Fixing of towel rack with connected fittings& make with all nessassary fittings of approved quality fixed as directed in masonry wall. Supply of all materials, labours, tools & plants and all other charges etc. complete, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 73 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers or Round Glass wall mounting Bracket Mirror holder clips or fitted as per site etc. complete. as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 74 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms, As directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 75 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, width 78 mm and effective height of 88 mm, weighing not less than 170 gms, As directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 76 | S/F Water supply & Sanitary Fixtures fiitting directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 77 | 15mm thick CP Bib cock |
| 78 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore Swan neck CP brass Bib/sink cock in kitchen sink or equivalent as per local market avaliblity and as per approval of Engineer Incharge |
| 79 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore or equivalent as per local market avaliblity and as per approval of Engineer Incharge |
| 80 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100mm diameter Shower or equivalent as per local market avaliblity and as per approval of Engineer Incharge or equivalent as per local market avaliblity and as per approval of Engineer Incharge |
| 81 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, 15mm nominal bore or equivalent as per local market avaliblity and as per approval of Engineer Incharge |
| 82 | Providing and fixing 8mm dia C.P. /S.S. jet with flexible tube upto 1 metre long with S.S. triangular plat to European type W.C. of quality or equivalent as per local market avaliblity and as per approval of Engineer Incharge |
| 83 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm nominal bore or equivalent as per local market avaliblity and as per approval of Engineer Incharge |
| 84 | PTMT Waste Coupling for wash basin and sink, Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 85 | P.V.C. waste pipe for sink or wash basin. Flexible pipe |
| 86 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length , 15mm nominal bore dia flexible connector for wash basin. |
| 87 | Nahani Trap with PTMT/PVC openable jali/grating |
| 88 | 20mm/25mm Brass wheel valve /CPVC valve |
| 89 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) - 32mm Brass wheel valve or equivalent as per local market availiblity and as per desigin approved by Engineer in charge |
| 90 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) - 40mm Brass wheel valve or equivalent as per local market availiblity and as per desigin approved by Engineer in charge |
| 91 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) - 50mm Brass wheel valve or equivalent as per local market availiblity and as per desigin approved by Engineer in charge |
| 92 | Providing and fixing PTMT Soap Dish Holder or equivalent as per desigin approved by Engineer in charge |
| 93 | Providing and fixing 25mm ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 94 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 100mm diameter Sluice Valve , Class 1or equivalent as per local market availiblity and as per desigin approved by Engineer in charge |
| 95 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 96 | Providing and Fixing 20mm dia\\" C\\" PVC/Finolex 20 mm dia pipe (Heavy)-25 kgf /Sq.cm ( Conceladed or exposed on wall or trenching and refilling) |
| 97 | Providing & laying 25 mm dia \\"C\\" PVC/Finolex (heavy duty) - 25 kgf /Sq.cm ( Conceladed or exposed on wall or trenching and refilling) |
| 98 | Providing & Laying 32 mm dia\\"C\\" PVC/Finolex pipes (Heavy duty)- 25 kgf /Sq.cm ( Conceladed or exposed on wall or trenching and refilling) |
| 99 | Providing & Laying 40mm dia\\"C\\" PVC/Finolex pipes (Heavy duty)- 25 kgf /Sq.cm ( exposed on wall or trenching and refilling) |
| 100 | Providing & Laying 50mm dia\\"C\\" PVC/Finolex pipes (Heavy duty)- 25 kgf /Sq.cm ( exposed on wall or trenching and refilling) |
| 101 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Each Tank Capacity 500 Litre prefered make syntax or Supreme |
| 102 | arrangement and making necessary holes for inlet, outlet and overflow |
| 103 | pipes but without fittings and the base support for tank. |
| 104 | 75mm Dia PVC Pipe for Drainage line ( Dia 40mm to 75mm) |
| 105 | 110mm Dia PVC pipe for Rain water and Sewer pipe |
| 106 | Supplying & fixing CI Manhole cover of approved size & make with all nessassary fittings of approved quality fixed as directed, Supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 107 | 300mmx300mm cover with frame/ or Size as per site ( CI/ RCC) |
| 108 | 900mm x900mm or 600mmx455mm cover with frame/ or Size as per site ( CI/ RCC) |
| 109 | Cleaning the septic tank/Manhole/Inspection chamber, sewer line with complete removal of scum and sludge from tank, throwing away the same as directed including removal and re-fixing of septic tank cover porperly, flushing the soil pipe line as directed, Wire brush scrubbing and washing with fresh water and diposing the same as per IS specification norms burried in the ground and as directed. Supply of all labour, tools &plants etc complete. |
| 110 | Septic tank |
| 111 | Manhole chamber |
| 112 | Repairing the septic tank/Manhole/Inspection chamber by Surrounding Minor excavation, Masonry, Top Slab/Cover replace with new one, Vent pipe, inlet outlet connection, inside and outside repairing work, Outside plaster work or as per site requirement etc. complete |
| 113 | Repairing the septic tank inside and outside, Repairing work by increasing its height 0.15 to 0.45, Top R.C.C. Slab replace with new One R.C.C. slab, Vent pipe prived and fitting, outer plaster abover ground level minor inside ground, and inner side repairing work as site requirement and as directed. Supply of all labour, tools &plants etc complete. |
| 114 | Repairing the Manhole inside and outside, Repairing work by increasing its height 0 to 0.25, Top R.C.C. Slab Cover replace with new One R.C.C. slab Cover, Outer plaster abover ground level minor inside ground, and inner side repairing work as site requirement and as directed. Supply of all labour, tools &plants etc complete. |
| 115 | Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 including 500x450 mm pre cast directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 116 | Dismantling & removing G I barbed wire from angle fencing post including roll and stacking with 50 mtr lead, Including cost of all tools, material, plant labour etc, complete. |
| 117 | Buy back of Dismentaled G I barbed wire (Qty. Same as above item 44) |
| 118 | Providing & fixing of New G I barbed wire ( Barbed wire weighing Minimum 9.38 kg per 100 meters(minimum)) to Angle fencing post including roll and stacking with 50 mtr lead, Including cost of all tools,material,plant labour etc, complete. |
| 119 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared including supply of all labour tools & plants, etc. complete as per direction of engineer-in-charge. |
| 120 | Dismantling of old wooden windows shutters including chokhats, hold fasts and other attachments etc. upto floor 2 level complete and stacking them within 1 km lead as directed at site including the cost of all labours, tools & plants etc. complete. Window Shutter and as site requirement as mention above |
| 121 | Buy back of Dismantaled - Window Shutter (Qty. Same as above item 61) |
| 122 | Replacement of damaged/broken glazed window shutter glazed panes with 4mm thick glass panes of approved 1st quality wood beading disposal of the debris, stacking of the old removed materials away from the site and as described as per condition of site including the all materials, labours, tools & plants and all other charges etc.complete. |
| 123 | Repairing and replacement existing wooden door shutter, repair by removing, cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge including the supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 124 | Doors |
| 125 | Window shutters with Frame |
| 126 | Providing second Class Teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge |
| 127 | Providing and fixing second class teak wood panelled/Flush shutters for doors, windows and clerestory windows, including ISI marked Brass butt hinges (heavy type) : Brass Hinges 100x70x4mm or more in size bright finished with necessery screws, Brass tower bolt (barrel type) 250x10 mm, Brass handles 125 mm, Brass Aldrop 250mm or more in size, door stopper other fittings as site requirement supply of all labours, tools, materials, etc. complete as directed by the engineer in charge (35mm thick). ( Fitting accessories sizes may vary slightly depending on available in market and as persite conditions.) |
| 128 | Providing and fixing glazed shutters for windows and clerestory windows using 4 mm thick float glass panes including ISI marked Brass pressed butt hinges bright finished of required size with necessary screws.30mm thick Shutters inclusive Brass Hinges 100x70x4 mm or 75x65x4mm bright finished with necessery screws, Brass tower bolt (barrel type) 100x10 mm, Brass handles 125 mm or 100mm, Wood Cleat Hinges 50 x 40 x 2.5mm or eye hook and other necessary fittings as site requirement bright finished with necessery screws,supply of all labours, tools, materials, etc. complete as directed by the engineer in charge .(30mm thick).( Fitting accessories sizes may vary slightly depending on available in market and as persite conditions.) |
| 129 | Providing and fiximg of fly proof shutter of member size (75mmx25mm thick ) with Saint Gobian mosquito net / Galvenised / stainless steel grade 304 wire gauge mosquito net of window shutter with approved 1st quality,brand of netlon jalli and fixed with teak wood beading of approved 1st quality,brand and necessary brass screws, nails etc. as directed at site, including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete inclusive Brass Hinges 75x40x2.5mm bright finished with necessery screws, Brass tower bolt (barrel type) 100x10 mm, Brass handles 125 mm or 100mm, Wood Cleat Hinges 50 x 40 x 2.5mm or eye hook and other necessary fittings as site requirement bright finished with necessery screws,supply of all labours, tools, materials, etc. complete as directed by the engineer in charge (25mm to 30mm thick as per site).( Fitting accessories sizes may vary slightly depending on available in market and as per site conditions.) |
| 130 | Providing and fiximg of fly proof shutter mosquito net of Saint Gobian mosquito net / Galvstainised/ stainless steel grade 304 wire gauge mosquito net of window shutter with approved 1st quality,brand of netlon jalli and fixed with teak wood beading of approved 1st quality,brand and necessary brass screws, nails etc. as directed at site, including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete |
| 131 | Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) and shutter/partition 20mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/cum and laminated on both side by laminate sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fir retardent having necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws and shutter shall be fixed to frame using approved hinges and other all fittings with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 132 | Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.as directed including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete ( Fitting sizes may vary slightly depending on available in market and as persite conditions.) or equivalent as local market availiblity and as per approved Engineer in charge |
| 133 | Replacement of 125x70x4 mm (heavy type) hinges for Doors & Windows |
| 134 | 75x65x4mm Brass (heavy type) butt hinges |
| 135 | 50x40x2.5mm Brassbutt hinges |
| 136 | 250x10mm Brass tower bolt |
| 137 | 200x10mm Brass tower bolt |
| 138 | 150x10mm Brass tower bolts |
| 139 | 100x10mm Brass tower bolts |
| 140 | 125mm Brass handle |
| 141 | 100mm Brass handle |
| 142 | Providing and fixing bright finished brass door latch with necessary screws etc. complete - 300x16x5mm |
| 143 | Providing and fixing bright finished brass door latch with necessary screws etc. complete - 250x16x5mm |
| 144 | Brass Eye Hook 200mm |
| 145 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete Size 40mm |
| 146 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete ( Twin rubber stopper) |
| 147 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type |
| 148 | Providing and fixing structural steel frame ( for dry cladding with 30mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular/round tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/lugs of angle iron/flats etc. which shall be welded to the frame and if required embedded in brick wall with cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes. Approved cramps/pins etc. priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (shop drawing shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment stainless steel cramps shall be paid for separately and nothing extra shall be paid). |
| 149 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat/corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified, Supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 150 | Water proofing treatment for Roof slab |
| 151 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253. Laying second layer of Fibre glass cloth/mesh when the first layer is still green. overlabps of joints of fibre closth should not be less than 10 cm. Third layer of 1.5mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.67 kg/Sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 10 to 25cm on parapet wall and tucked into groove in papapet all around. |
| 152 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender