Tender For E Tender For The Miscellaneous Civil Works - Dismantling, Re-Erection And Re-Fixing Of Existing Terrace Roofing Works Above Refrigeration Block At Kattappana Dairy , Idukki Dist.
Tender Value
3.35 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
12 days left
EMD
3350
Bank guarantee accepted
Document Fee
335
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E Tender For The Miscellaneous Civil Works - Dismantling, Re-Erection And Re-Fixing Of Existing Terrace Roofing Works Above Refrigeration Block At Kattappana Dairy , Idukki Dist.
BOQ
| Sl. No. | Item Description |
| 1 | BLOCK WORK:-Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 2 | 20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand) |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer and two coat of epoxy paint, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coat of epoxy paint, all complete. |
| 5 | Providing and fixing .5 mm meta colour sheets(Glavalume sheet) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 6 | Fixing old Square type approved quality and brand PVC rain water gutter of 200 mm wide including all cost and conveyance charge, pvc down-outlet at every 3/4M etc complete. charges for structural steel for gutter shall bepaid in the relevant item of structural steel. |
| 7 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 8 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 9 | Dismantling roofing ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :building roof area -10.27x5.7 sqm and 3.9 m centre height. |
| 10 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 11 | Refixing old precoated galvanised iron profile sheets,ridges (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), including cleaning, straightening, repositioning, providing new self-drilling screws/bolts, washers and necessary accessories, maintaining proper overlaps and alignment, and making the roof watertight, and filling/sealing any existing or newly formed holes, gaps or openings with suitable weatherproof silicone sealant to ensure watertightness,complete as directed by the Engineer. complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 12 | Dismantling , dismembering and lowering existing steel roof truss , (angles, tees, flats and channels) including removal of gusset plates , bolts, nuts , cutting/welding wherever required,marking of members for identification and re-erection , stacking and handling within 50m, and re-assembling and fixing the same truss after raising its level to required height , including necessary cutting, welding, bolting, alignment , levelling, lifting/hoisting and all incidental works ,complete as directed by Engineer -in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender