Tender For Day To Day Maintenance/ Restoration Of Various Water Supply Schemes So As To Provide Assured Drinking Water Supply In Phallian Mandal And Adjoining Areas Of Jal Shakti (Phe) Sub Division Kandi-I Of Rural Division Jammu
Tender Value
5 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance/ Restoration Of Various Water Supply Schemes So As To Provide Assured Drinking Water Supply In Phallian Mandal And Adjoining Areas Of Jal Shakti (Phe) Sub Division Kandi-I Of Rural Division Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30cm measured at hieght of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by manual means in tranches for foundation, drains, pipes, cables etc (Not exceeding 1.5m in width) and for shafts, wells, cess pits and the like not exceeding 10 Sqm on plan, including dressing of sites and ramming of bottoms lift upto 1.5m, including getting out excavated earth disposal of surplus excavated earth as directed: all kinds of soils 1m from cutting edge. |
| 3 | Earth work in bulk excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50meters and lift upto 1.50m, as directed by Engineer-in-Charge: all kinds of soils. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and left upto 1.5mt.(Excluding rolling and watering). |
| 5 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 6 | Dismantling manually/mechanically including stacking of serviceable material and disposal of unserviceable material within 50mtr lead as per direction Engineer-in-Charge a) Water bound macadam road. |
| 7 | b) Bituminous road |
| 8 | Dismantling of G.I.pipe (external work) incl. excavation and refilling trenches after taking the out pipes, manually/by mechanical means incl. stacking of pipes within 50mtr lead as per direction Engineer-in-Chargea) 15mm to 40mm nominal bore |
| 9 | b) Above 40mm nominal bore |
| 10 | Dismantling C.I.pipes/DI Pipe manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stackingof pipes and lead at site within 50 meter lead as per direction of Engineer-in-charge.Including excavation and refilling trenches after taking out the pipes.Upto150mmdiameter. |
| 11 | Dismantling C.I.pipes/DI Pipe manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stackingof pipes and lead at site within 50 meter lead as per direction of Engineer-in-charge.Including excavation and refilling trenches after taking out the pipes.Above150mm dia upto300mm dia. |
| 12 | Dismantling C.I.pipes/DI Pipe manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stackingof pipes and lead at site within 50 meter lead as per direction of Engineer-in-charge.Including excavation and refilling trenches after taking out the pipes.Above 300mm dia. |
| 13 | Deployment of extra fitters/Mazdoor for restoration of damaged G.I.pipes, rethreding of pipes, locating/traces of blockages/leakages and Cleanical of Digwell/GSR/OHT.A) Mazdoor |
| 14 | b) Fitter |
| 15 | Providing ,Laying & Fitting of G.I.pipes complete excluding cost of earth work and refilling15mm dia G.I.pipe |
| 16 | 20mm dia G.I.pipe |
| 17 | 25mm dia G.I.pipe |
| 18 | 32mm dia G.I.pipe |
| 19 | 40mm dia G.I.pipe |
| 20 | 50mm dia G.I.pipe |
| 21 | 65mm dia G.I.pipe (L) |
| 22 | 65mm dia G.I.pipe (M) |
| 23 | 80mm dia G.I.pipe (L) |
| 24 | 80mm dia G.I.pipe (M) |
| 25 | 100mm dia G.I.pipe (L) |
| 26 | 100mm dia G.I.pipe (M) |
| 27 | 150mm dia G.I.pipe (M) |
| 28 | Laying & Fitting of G.I.pipes (all classes) complete excluding cost of pipes, fitting and earth work.15mm and 20mm dia G.I.pipe |
| 29 | 25mm and 32mm dia G.I.pipe |
| 30 | 40mm and 50mm dia G.I.pipe |
| 31 | 65mm and 80mm dia G.I.pipe |
| 32 | 100mm and 150mm dia G.I.pipe |
| 33 | Providing, laying & fitting of HDPE pipes in trenches 110 mm HDPE pipes (PN-12.50) including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 34 | Providing, laying & fitting of HDPE pipes in trenches 90 mm HDPE pipes (PN-12.50) including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 35 | Providing, laying & fitting of HDPE pipes in trenches 75 mm HDPE pipes (PN 10) including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 36 | Providing, laying & fitting of HDPE pipes in trenches 63 mm HDPE pipes including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 37 | Providing, laying & fitting of HDPE pipes in trenches 50 mm HDPE pipes including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 38 | Providing, laying & fitting of HDPE pipes in trenches 40 mm HDPE pipes including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 39 | Providing, laying & fitting of HDPE pipes in trenches 32 mm HDPE pipes including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 40 | Providing, laying & fitting of HDPE pipes in trenches 25 mm HDPE pipes including cost of fitting,pipes & overheads, but excluding earth work and refilling |
| 41 | Laying & fitting of HDPE pipes in trenches 110 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 42 | Laying & fitting of HDPE pipes in trenches 90 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 43 | Laying & fitting of HDPE pipes in trenches 75 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 44 | Laying & fitting of HDPE pipes in trenches 63 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 45 | Laying & fitting of HDPE pipes in trenches 50 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 46 | Laying & fitting of HDPE pipes in trenches 40 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 47 | Laying & fitting of HDPE pipes in trenches 32 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 48 | Laying & fitting of HDPE pipes in trenches 25 mm HDPE pipes excluding cost of pipe, earth work and refilling but including fitting and Overheads |
| 49 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 110mm nominal bore |
| 50 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 90mm nominal bore |
| 51 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 75mm nominal bore |
| 52 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 63mm nominal bore |
| 53 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 50mm nominal bore |
| 54 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 40mm nominal bore |
| 55 | Providing & fixing HDPE coupler (heavy duty) complete job as per the direction of Engineer-in-charge. 32mm nominal bore |
| 56 | Repair of FHTC (which include saddle and other accessories) |
| 57 | Providing and fixing C.I.sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately.200mm dia (Class-1ST) Heavy Duty confirming IS Standard. |
| 58 | 150mm dia (Class-1ST) |
| 59 | 100mm dia (Class-1ST) |
| 60 | 80mm dia (Class-1ST) |
| 61 | 65mm dia (Class-1ST) |
| 62 | Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end)20 mm dia nominal bore |
| 63 | 25 mm dia nominal bore |
| 64 | 32 mm dia nominal bore |
| 65 | 40 mm dia nominal bore |
| 66 | 50 mm dia nominal bore |
| 67 | 65 mm dia nominal bore |
| 68 | 80 mm dia nominal bore |
| 69 | Repar of GM Gate valves by way of replacement of spindle rods including cost of spindle rods40mm |
| 70 | 100mm |
| 71 | Repair of sluice valve/check valves/mushroomvalves by way of replacement of spindle rodsincluding cost of spindle rods, insertion of lesther sheet/rubber sheet, nuts bolts etc50mm |
| 72 | 100mm |
| 73 | 150mm |
| 74 | 200mm |
| 75 | Providing and fixing of G.I union in G.I pipe including cutting and threading the pipe and making complete job (New work)15 mm nominal bore |
| 76 | 20 mm nominal bore |
| 77 | 25 mm nominal bore |
| 78 | 32 mm nominal bore |
| 79 | 40 mm nominal bore |
| 80 | 50 mm nominal bore |
| 81 | 65 mm nominal bore |
| 82 | 80 mm nominal bore |
| 83 | Providing and fixing of G.I union in existing G.I pipe line including cutting and threading the pipe and making long screw incl. excavation and refilling the earth and making the good the same complete15 mm nominal bore |
| 84 | 20 mm nominal bore |
| 85 | 25 mm nominal bore |
| 86 | 32 mm nominal bore |
| 87 | 40 mm nominal bore |
| 88 | 50 mm nominal bore |
| 89 | 65 mm nominal bore |
| 90 | 80 mm nominal bore |
| 91 | Making connection of G.I.distribution branch with G.I.main of following sizes by providing and fixing Tee, incl. cutting and threading the pipe etc. complete.25 to 40mm nominal bore |
| 92 | 50 to 80mm nominal bore |
| 93 | Welding, including transporation of plant at site etc. complete by electric plant |
| 94 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required for ladder, main hole and similar work. |
| 95 | Providing & laying in position cement concrete of specified grade including curing but excluidng the cost of centring & shuttering all work upto plinth level with 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggr. 20mm nominal size (Crusher) |
| 96 | Reinforced cement concrete work in arches, archribs, domes, valults, shells folded plate & roofs having slope more than 15 upto floor five level including curing but excl. the cost of centring, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggr. 20cm nominal size) |
| 97 | Reinforced cement concrete work in walls (any thickness), incl. attached pilasters, buttresses, plinth and string courses, fillets, coloumns, pillars, piers, abutments, posts and sturts, etc. upto floor five level including currying but excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggr. 20mm nominal size |
| 98 | Centring and shuttering incl. strutting, propping etc. and removal of form work for Foundation, footings, bares of column etc. for mass concrete |
| 99 | Extra for shuttering in circular works 20% |
| 100 | Walls (any thickness) incl. attached pilasters, buttresses, plinth & string couarses etc. |
| 101 | Extra for shuttering in circular works 20% |
| 102 | Arches, domes, vaults upto 6m span |
| 103 | Extra for arches, domes, vaults exceeding 6 m span |
| 104 | Providing, stacking and Filling of graded stone agg. (Filter Media) of size 1.5 -4mm, 6-12mm, 12-20mm, 20-40mm, 40-65mm in five layers (Nallah) including segregation, carriage from source to be indentified by Engineer Incharge. |
| 105 | Supply of Silica sand as filter media of size 0.45 mm-0.7 mm having uniform co-efficient 1.3-1.75 and should be free from dust and other organic and inorganic impurities including, filling and carriage from source i.e Ganderbal Srinagar |
| 106 | Supply of spun yarn (Rassa) |
| 107 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate crushed |
| 108 | Providing & laying in position cement concrete of specified grade including curing but excluidng the cost of centring & shuttering all work upto plinth level in 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggr. 20mm nominal size (Crusher) |
| 109 | Providing & laying in position specified grade of reinforced cement concrete incl. curing but excluding the Cost of centring & shuttering, finishing & reinforcement all work upto plinth level in 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggr. 20mm nominal size (Crusher) |
| 110 | Providing & laying in position specified grade of reinforced cement concrete incl. curing but excluding the Cost of centring & shuttering, finishing & reinforcement all work upto plinth level in 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggr. 20mm nominal size (Crusher) |
| 111 | Demolishinmg cement concrete manually/by mechanical means incl. disposal of material within 50mtr lead as per direction Engineer-in-charge1:3:6 or richer mix |
| 112 | 1:4:8 or richer mix |
| 113 | Demolishinmg RCC work manually/by mechanical means incl. stacking of steel bars and disposal of unserviceable material within 50mtr lead as per direction Engineer-in-charge |
| 114 | Steel reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete (TMT) |
| 115 | Providing and fixing 1mm thick M.S.Steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete , including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece |
| 116 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Old steel work (One or more coats) |
| 117 | White washing with lime to give an even shade: old work (Two or more coats) |
| 118 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 119 | Finishing walls with water proofing cement paint paint of required shade. Old work (One or more coats) applied @ 2.20Kg/10Sqm complete incl. cost of primer applied @ 0.80litres/10Sqm complete incl. cost of priming coat,. |
| 120 | Hire charges of Hydraulic excavator of 1 cum bucket including cost of serving staff and cost of POL |
| 121 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. A) Upto 150 mm diameter. |
| 122 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. A) For thickness of tiles 10 mm to 25 mm. |
| 123 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. B) For thickness of tiles above 25 mm and upto 40 mm. |
| 124 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. |
| 125 | Providingandlaying60mmthickfactorymadecementconcreteinterlocking paver block of M-30 grade made by block making machinewith strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed offines and, filling the joints with coarses and etc. all complete as per direction of Engineer-in-charge. |
| 126 | Hire and running charges of Generator 250KVA for welding including cost for servicing of operating staff and POL etc. (Item applicable where electicity are not available with certificate of concerned AEE) |
| 127 | Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as perdirection of Engineer-in-Charge. The cleaning shall consist following operations:-(i)Tank shall beemptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surfacearea of the sump shall then scrubbed thoroughly with wire brush etc.and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) Thetreated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc.as per direction of Engineer-in-Charge. |
| 128 | Barricading of GI pipe incl excavation of pits for kfixing of angle iron posts binding and dismantling of same incl. refilking of pits and carriage completeMazdoor @ Rs. 553/day |
| 129 | Fitter @ Rs. 734/day (2nd class Asstt. Fitter) |
| 130 | Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges withs crews,etc.as required,all complete as per the direction of the Engineer-in-charge. |
| 131 | Providing and fixing of Electric fitting with 15Watt LED Lights including all necessary fittings (including Wire, LED Lights/Switches & Sockets etc.) Complete job. (LMR) |
| 132 | Carriage of sand, stone aggregate from nearest source to site of work incl. loading, unloading and stacking complete (To be paid as per actual distance involved at site): Sand average distance 1 Km (One Km) by M.T. |
| 133 | Stone aggregate below 40mm nominal size average distance 1 Km (One Km) by M.T. |
| 134 | Stone aggregate 40mm and above nominal size average distance 1 Km (One Km) by M.T. |
| 135 | Cement/Steel/Alum and other heavy material average distance 1 Km (One Km) by M.T. |
| 136 | Sand average distance upto 500mtr H.L. |
| 137 | Stone aggregate below 40mm nominal size average distance upto 500mtr H.L. |
| 138 | Stone aggregate 40mm and above nominal size average distance upto 500mtr H.L. |
| 139 | Cement average distance upto 500mtr H.L. |
| 140 | Steel, alum and other heavy material average distance upto 500mtr H.L. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender