Tender For Upgradation Of Jiyana Sukrala Road Km 0/00 To 3/000 Including Construction Of 1 No. 30 M Span Bridge At Rd 2/420 Over Sukrala Nallah.(Sh: Construction of 1 No.30.00 Meter Span Bridge Over Sukrala Nallah At Rd 2/420 Including Approach Road
Tender Value
3.71 Crore
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
7.43 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Jiyana Sukrala Road Km 0/00 To 3/000 Including Construction Of 1 No. 30 M Span Bridge At Rd 2/420 Over Sukrala Nallah.(Sh: Construction of 1 No.30.00 Meter Span Bridge Over Sukrala Nallah At Rd 2/420 Including Approach Road From Rd 2/300 To 3/000) Estimated Cost Rs:- 37180350 Earnest Money Rs:- 743700 Time Limit :- One Year
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work in hilly area in all heights and depths in all kind of soil by manual/mechanical means including saturated soil comprising of mixed soil, ordinary rock and hard rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side,water pollution, etcetra and to protect stability of hill side track shall be excavated with chiseling and wedging out rock (where blasting is prohibited). all earth work in cutting/excavation including rock excavation shall be carried,out true tolines,grades,side slopes, width, camber super-elevation and level as shown on the drawings or as directed by the Engineer-in-Charge,in conformit with the requirement of MORD technical specification 2014 (two thousand fourteen) for Rural Road. clause 300, 1603 (three hundred, one thousand six hundred three) of General conditions for contract to achieve designed formation width including hauling and stacking of material useful for construction at suitable sites and safe disposal & dumping to be arranged by the contractor of unsuitable cut materials at his own lavel and no excavated material be throun/dumped along road side or in nallah as per the guideline of NGT in specified manner,trimming,filling of unevenness,blindage and finishing of the road to specified dimensions or as directed by the Engineer -in -Charge for smooth riding. The recovery for stones,whether useful or not, for 294.18 cum (Two hundred ninty four point one eight ) in all cases @ rupees 300/- only (Rupees three hundred only) per cubic meter shall be effected on pro- rata basis. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall compensated by him in all cases.The rates are inclusive octrol,royality,Malkana, toll tax or other taxes but excluding GST imposed by Government. |
| 2 | Construction of embankment and shoulders with approved materials obtained from roadway cutting and excavation of drains and foundation of other structures, graded and compacted to meet requirement of Table 300.1 and 300.2 as per MORD technical specification clause 301.5 as per the direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 3 | Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil . ordinary rock, hard rock, chiseling/ wedging out of rock (where blasting is prohibited ) as per drawings and M.O.R.D technical specification clause 305.1 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of all surplus materials to approved dumping site(to be arranged by the Contractor) upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 4 | Providing and laying cement concrete 1:5:10 mechanically mixed (one cement : Five sand : ten graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with Mild steel plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls as per drawing and MORD technical specifications clause 802,803,1202and 1203 and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 5 | Providing and laying cement concrete 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with Mild steel plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls as per drawing and MORD technical specifications clause 802,803,1202 and 1203 and as per direction of Engineer-in-Charge including entire carriage of material with in all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 6 | Back filling behind abutment, wing wall and return wall with Granular material complete as per drawings and MORD Technical Specification Clause 1204.3.8 and as per the direction of the Engineer-in-Charge including carriage of material through all modes of transportation within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 7 | Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm(one hundred milimetre) dia PVC pipe extending through the full width of the structures with slops of 1(V):20(H) (one vertical : twenty horizontal) towards drawing face complete as per drawing and MORD technical specification clauses 614, 709, 1204.3.7 and as per the direction of the Engineer-in-Charge including carriage of materials through all modes of transportation with in all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 8 | Providing and laying mechanically mixed and vibrated reinforced Cement Concrete design mix to obtain minimum compressive strength of M-20 (M- twenty) with minimum cement contents not less than 350 kg/cum(three hundred fifty kilogramme per cubic metre) including cost of form work, and curing complete in open foundation upto all height/ depth on ground or under water and curing complete including form work with the mild steel plate , including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths as per drawing and MORD technical specification clause 802, 803, 1202 and 1203 as per the direction of Engineer-in –charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 9 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3mm (three millimeter) thick corrugated sheet metal beam rail, 85cm (eighty five centimeter) above road/ ground level, fixed on ISMC (Indian standard Medium Channel) series channel vertical post, 150x75x5mm (one hundred fifty into seventy five into five millimeter) spaced 2m (two meter) centre to centre, 2.00m (two point zero zero meter) high, 1.15m (one point fifteen meter) below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 (Indian standard : one thousand three hundred sixty seven ) and IS:1364 (Indian standard : one thousand three hundred sixty four) , metal beam rail to be fixed on the vertical post wih a space of channel section 150x75x5mm(one hundred fifty into seventy five into five millimeter) , 546mm (five hundred fourty six millimeter) long complete as per clause 810 including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 10 | Providing and laying mechanically mixed and vibrated plain / reinforced nominal mix cement concrete M-10 (M- ten) grade on ground or under water and curing complete including pumping or bailing out water, dewatering removal of shush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in open foundation for all types of structures complete as per drawing and MORD technical specifications clause 802,803, 1202 &1203 and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 11 | Providing and laying mechanically mixed and vibrated plain /reinforced Cement Concrete design mix with a minimum cement contents @ 275 kg/cum(two hundred seventy five kilogramme per cubic metre) to obtain minimum compressive strength of M-15 (M- fifteen ) grade with broken/ crushed aggregate 20mm (twenty millimetre) nominal size including cost of form work, and curing complete for 14 (fourteen) days in sub structure and abutment on ground or under water and curing complete including form work with the Mild Steel Plate , including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths as per drawing and MORD technical specification clause 802, 803,1202 and 1203 and as per the directions of Engineer-in –charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 12 | Providing and laying Reinforced concerte pipe NP3 900mm(nine hundred millimetre ) dia for culverts on first class bedding of granular material in single row including providing and fixing collar with cement mortar 1:2(one cement : two sand ) but excluding excavation protection work back filling concrete and masonry work in head walls and parapets Clause 1106, and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 13 | Providing and laying flooring laid over cement concrete bedding complete as per drawing and technical specification clause 1303.3 Rubble stone laid in cement mortar 1:3 (One Cement : three sand), as per drawing and technical specification as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 14 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1. as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 15 | Construction of granular sub base by providing well graded material mixing in a mechanical mix plant at OMC carriage of mixed material to work site upto all leads spreading in uniform layers with motor grader on prepared surface and compacted with smooth wheel roller 80-100 kn (eighty to one hundred) static roller to achieve the desired density, complete as per MORD technical Specification Clause 401. for grading –I material including carriage of material within all leads and lifts and other incidentals The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 16 | Providing laying spreading and compacting by mechanical means graded stone aggregate to wet mix macadam specification as per Table 400.11 & 400.12 including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/ base course on a well prepared surface and compacting with vibratory roller to achieve the desired density including lighting barricading and maintenance of diversion, etcetera as per MORD technical specification clause 406 and as per directions of Engineer- in- Charge by mechanical means including entire carriage of material in all leads , lifts. and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 17 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm (zero point seven zero - one point zero kilogram per squaremeter) using mechanical means as per Technical Specification Clause 502 .Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 18 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg/sqm (zero point two five to zero point three zero kilogram per square meter ) on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 . Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 19 | Providing and laying 50mm(fifty millimetre) thick bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder @ 3.3% (at the rate of three point three percent) mix filler @ 2.00 %(two point zero zero percent) transported to site laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 .Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 20 | Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with bitumen of grade VG-30 (viscosity grade -thirty ) Made of H.P.C.L , B.P.C.L , Indian oil corporation @ 5.5% (Five point five percent) (percentage by weight of total mix) and limefiller @ 2% (two percent) (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120(one hundred to one hundred twenty) TPH capacity using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per MORTH technical specification clause 507 complete and as per directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals .The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 21 | Providing and laying of inter locking concrete paver block vibro compacted upto M-40 (M-Fourty ) grade having thickness 80mm(eighty millimeter) including border or kerb block over sub base of sand as per drawing and MORD technical specification Clause-1504 approved any make confirming to the Nitco, NTC/ BIS specification for interlocking paver blocks including entire carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 22 | Providing and laying of hot applied Thermoplastic compound 2.5mm (two point five millimeter) thick including reflectorising glass beads @250gms(two point five zero gram) per sqm area, with road marking materials with 20%(twenty percent ) glass beads having reflective index of 1.5(one point five millimeter) and 75%(seventy five percent) spherical and indigenous or foreign plant having sufficient strength to withstand heavy load without deformation and having softening point 25 to 30 degree(twenty five to thirty degree) more than the climate temperature of the area in a width of 0.10 (zero point ten metre) strips in specified colour as per directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 23 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty to one hundred centimetre) high above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty into one hundred millimetre) rectangular or 75 mm (seventy five millimetre) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 as per the direction of Engineer in Charge including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 24 | Providing and fixing cat eyes make (3M) (three metre) of size 100×20 mm (one hundred into twenty millimetre), made of heavy-duty body shall be molded dual shank ASA (Acrylic Styrene Acolyretrite) or HP (High Impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion-resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 N tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35° ± 5° (thirty five degree plus minus five degree) to base. The reflective panels on both sides with at least 12 cm²(twenty centimetre square) of each area side as per the direction of Engineer in Charge including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 25 | Providing and fixing typical informatory sign board with Logo as per MORD specifications and drawing three M.S plates of 1.6mm(one point six millimetre) thick top and middle plate duly welded with M.S flat iron 25mm x 5mm(Twenty five millimetre into five millimeter) size on back on edges. The lower plate will be welded with M.S angle iron frame of 25mmx25mmx5mm(Twenty five millimetre into Twenty five millimetre into five millimetre) The angle iron frame of the lower post plate and flat iron frame of middle plate will be welded to 2 (two) Nos 75x75mm (seventy five into seventy five millimeter) of 12 SWG sheet tubes posts duly embedded in cement concrete M-15(M-Fifteen) grade blocks of 450x450x600mm( Four hundred fifty into Four hundred fifty into Six hundred millimetre ) 600mm(six hundred millimeter) below ground level. Two top most diamond plate will be welded to middle plate by 47mmx47mm (forty seven millimeter into seventy seven millimeter) of 12 SWG steel plate tube. All M.S will be stove enameled on both sides. Lettering and printing arrows border etcetera. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour . All sections of framed posts and steel tube will be painted with primer and two coat of epoxy paint as per drawing and MORD technical specification clause 1701 and annexure 1700.1 including entire carriage of material with in all leads,lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 26 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm(one point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm(sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm(forty seven into foty seven ) of 12(twelve) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm(four hundred fifty into four hundred fifty into six hundred millimeter), 600 mm(six hundred millimetre) below ground level as per approved drawing and MORD technical specifications Clause 1701.2.2 and as per directions of Engineer- in- Charge including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 27 | Providing and fixing of semi –reflective cautionary, mandatory and informatory sign board as per IRC-67 as per MORD specifications 2014 and drawing of 1.5mm(one point five millimetre) thick mild steel sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 for rural road of required grade and colour supported and welded on 47x47mm(forty seven into forty seven millimetre) of 12 SWG sheet tubes firmly fixed to be ground by meant of properly designed foundation with in cement concrete M-15(M-Fifteen) grade design mix minimum cement content 240kg(Two hundred forty kilogramme) per cubic metre blocks of 450x450x600mm( Four hundred fifty into Four hundred fifty into Six hundred millimetre ) 600mm(six hundred millimeter) below ground level as per approved drawing and MORD technical specifications clause 1701.2.2 800mm x 600 mm (eight hundred millimetre into six hundred millimetre) rectangular including entire carriage of material with in all leads, lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 28 | Providing and fixing ordinary kilometre stone precast re-inforced cement concrete M-15 (M-Fifteen) grade design mix minium cement content 240kg(Two hundred forty kilogramme) per cubic metre kilometre stone of standard design as per IRC 8, fixing in position including painting and printing etcetera as per drawing and MORD Technical specification 2014 clause 1703 including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 29 | Providing and fixing 200metre(two hundred millimeter) stone (precast) re-inforced cement concrete grade M-15 (M-Fifteen) design mix minimum cement content 240kg(Two hundred forty kilogramme) per cubic metre local stone of standard design as per IRC 8 fixing in position including painting and printing etcetera. as per drawing and MORD technical specification 2014 clause 1703 including entire carriage of material with in all leads, lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 30 | Providing and fixing of reinforced cement concrete M 15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 31 | Providing and laying of boulder apron laid in wire crates with 5 mm (five millimetre) dia Galvanised Iron wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (hundred into hundred millimetre) mesh (woven diagonally) including 10 (ten) per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg(twenty five kilograme) each as per drawing and MORD technical specifications Clause 1301 and as per directions of Engineer- in- Charge including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 32 | Earth work in excavation for foundation of bridge structures like abutment in all type of classification of soil comprising ordinary rock, hard rock, chiseling/wedging out of rocks (where blasting in prohibited) as per drawing and MORTH technical specifications and as per direction of the Engineer-In-Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto all leads and lifts including dressing of side bottom and pumping, bailing out water (surface and sub-soil water) upto all depth any quantum of water including cleaning of slush which may arise out during dewatering including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by Government. |
| 33 | Abutments:- Depth upto 3.00 metre (Three metre) Ordinary Soil by Mechanical Means |
| 34 | Depth upto 3.00 to 6.00 metre (Three to six metre) Ordinary soil |
| 35 | Ordinary Rock (not requiring blasting) by Mechanical Means for Depth beyond 6 m |
| 36 | Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1:3:6 (One cement : three sand : six graded crushed stone aggregate) 20mm (twenty millimetres) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in abutments foundation for all type of structures complete as per drawing and technical specification clause 1500,1700 &2100 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 37 | Providing weep holes in brick/stone masonry/plain/reinforced concrete abutment , wing walls, return walls, retaining walls with 100mm (One hundred millimetre) dia AC pipe extending through the full width of the structures with slopes of I(V):20(H) towards drawing face complete as per drawing and MORTH technical specification clause 2706& 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 38 | Providing concrete for plain/ reinforced concrete in open foundation complete as per drawing and technical specification. PCC grade M-15 and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in abutments foundation for all type of structures complete as per drawing and technical specification clause 1500,1700 &2100 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 39 | Providing and laying plain/reinforced cement concrete in sub-structure of bridge complete as per drawing and MORTH technical specification clause 1500,1700 & 2100 design mix to obtain minimum compresive strength of Grade M-30 (M-Thirty) with minimum cement content @ 420 kg/cum(at the rate four hundred twenty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 40 | Supplying fitting and placing HYSD bar reinforcement made of TATA, TISCON/SAIL Fe-550D in foundation and sub-structure of Pier cap, Capping beam, dirt wall, pedestal & Reaction block in all heights including cost of binding wire and cost for cutting binding, bending and placing in position of bars complete as per drawing and MORTH technical specifications clause 1600 & 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 41 | Providing and laying of filter media with granular material/stone crushed aggregate satisfying the requirements laid down in of MORTH specifications clause 2504.2.2 to a thickness of not less than 600mm ( six hundred milimetre ) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 42 | Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined a metal cylinder, sealing rings, dust seals, PTFE, surface sliding against stainless steel mating surface, complete assembly to be of cast steel / fabricated structural steel, metal and elastomer elements to be as per IRC :83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRT&H technical Specifications clause 2000 & 2200 complete as per drawing and approved Technical Specifications. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 43 | Furnishing and Placing Reinforced/ Prestressed Cement Concrete M-30 in Super-Structure in deck slab complete as per Drawing and Technical Specifications. (Using Concrete mixer) (ht Above 10.00m) with minimum cement content @ 420 kg/cum(at the rate four hundred twenty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 44 | Furnishing and Placing Reinforced/ Prestressed Cement Concrete M-30 in Super-Structure in Kerb complete as per Drawing and Technical Specifications. (Using Concrete mixer) (ht 5.00 to 10.00m) with minimum cement content @ 420 kg/cum(at the rate four hundred twenty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 45 | Supplying fitting and placing HYSD bar reinforcement made of TATA, TISCON/SAIL Fe-550D in Super Structure including cost of bending, binding wire and cost for cutting and placing in position of bars complete as per drawing and MORTH technical specifications clause 1600 & 2200 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 46 | Providing and laying reinforcement concrete mechanically mixed and vibrated of design mixed minimum compressive strength of grade M-30 (M-thirty )with minimum cement content @ 420 kg/cum(at the rate four hundred twenty kilogramme per cubic metre) including cost of form work curing and cost of reinforcement for approach slab and curing complete as per drawing and MORTH technical specifications clause 1500,1600, 1700 & 2704 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 47 | Construction of RCC railing of M-30 Grade (M-Thirty) in situ with 20mm (Twenty millimetre) nominal size aggregate true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500 (One in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimetres), leaving adequate space between vertical post for expansion, compete as per approved drawings and MORTH technical specifications clause 2703,1500,16,00 & 1700 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 48 | Providing and fixing G.I.(Galvanised iron) drainage spouts complete as per drawing and MORTH technical specifications clause 2705 as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 49 | Providing and laying 75mm (Seventy five millimetre) cement concrete wearing coat M-30 grade (M-Thirty)with minimum cement content @ 420 kg/cum(at the rate four hundred twenty kilogramme per cubic metre) including reinforcement complete as per drawing and MORTH Technical Specifications clause 2702 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 50 | Providing and installing single strip seal expansion joint with a total allowable movement capacity of 70mm (Seventy millimetre) as per approved Drawing, and Specifications to be installed by the manufacturer/supplier or there authorised representative ensuring compliance to the manufacturer instruction for installation drawings MORTH technical specifications Clause 2606 and , MoRT&H circular no. RW/NH-35049/1/96-S&R dated 30th November 2000 and 20th February 2001, IRC: SP: 69-2005 'Guidelines & Specifications for Expansion Joints' including entire carriage of material with in all leads and lifts as per direction of Engineer-in-Charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender