Tender For Renovation Works For New Conference Room In Rbio, Aob.
Tender Value
34.84 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
19 days left
EMD
69680
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Works For New Conference Room In Rbio, Aob.
BOQ
| Sl. No. | Item Description |
| 1 | Tile Flooring |
| 2 | Carefully dismantling the existing flooring and dispose off the debris from Bank premises and Providing, laying and fixing 10mm thick approved quality polished Double Charged/ full body vitrified tiles of size 800 mm. X 1600 mm. or any other approved size of approved manufacture make and shade with cement mortar 1:4 (1 cement and 4 coarse aggreagte) in flooring in required design and pattern on the existing flooring, including filling the joints with polymer cement grout or white cement slurry mixed with polymer and matching pigment, cleaning, curing, etc. The rate shall include for additional thickness of cement mortar for tile fixing, if so required to maintain proper floor level/slope and the cost of preparation of surface after dismantling of existing floor upto the mother surface of the area and by making of deep grooves by machine, hacking of surface to receive the flooring, cleaning; disposal of debris out of Bank’s premises, including all lead and lift etc. all complete as directed by the Bank’s Engineer. Note:- 1. Exposed plan area shall only be measured and paid for. 2. Basic Rate of Tiles is Rs. 937 per Sqm. inclusive of all taxes/GST and cess. |
| 3 | Providing and fixing 10mm thick approximately 100 mm. high approved quality polished Double Charged/Full body Vitrified tiles of approved make with cement mortar 1:4 (1 Cement & 4 Coarse sand) in skirting (tiles cut from 800 mm. X 1600 mm. size and matching the edge tile joints )wherever required; in all colours, design and pattern; grouting joints with polymer cement grout or white cement slurry mixed with polymer and matching pigment, cleaning, curing, etc. The rate shall include for carefully dismantling of existing marble mosaic skirting (as and where required), making good the damages with cement mortar, cleaning, disposal of debris out of Bank’s premises, etc. all complete as directed by Bank’s Engineer. Note:- 1. Exposed area of vitrified tile skirting shall only be measured and paid for.2.Basic Rate of Tiles is Rs.937/- per Sqm.inclusive all taxes/GST & cess |
| 4 | Partition Walls |
| 5 | Providing, fabricating & fixing full height double skin solid partition wall classified asFire Class A as per ASTME-8 using with mild steel hollow section of size 50x50x1.6 mm to make the framing in such a way that vertical member should be in one piece anchored with ceiling and floor to make the grid of size 600x600 mm c/c both ways to use horizontally and vertically leaving space for opening and suitable supporting members beside opening to be provided with necessary welding at junctions and fixing the frame to wall/ceiling/floor with steel dash fasteners of 8mm dia,75mm long bolt and the alternate members to be extended upto the original ceiling/RCC roof. The MS frame shall be dipped painted with two coats of approved anti-rust steel paint over a coat of primer.The framing shall be covered both side using 25mm thick HDHMR fibre glass board conforming to density 850–900 kg/m³ acoustic wall panel (fibre glass substrate25mm thick, Wall Panel size 600x1200mm Nominal and shall achieve an NRC of 0.85), wrapped with fabric conforming to fire retardent and finish with in decorative pattern and on outerside of 25mm thickHDHMR fibre glass board partition finished with laminate of 1mm thick as per design/direction or approval of Bank's Engineer.Note:Measurement shall be made on the exposedsurface only one side. The exposed surface of the HDHMR density 850–900 kg/m³ at inner side of partition wall shall be finished with 25 mm thick acoustic wall panel of approved make and shade, and outer side of partition shall be finished with 25mm thick acoustic wall and 1 mm laminate fixing as per design and direction of Bank's Engineer. |
| 6 | Wall Panelling |
| 7 | Providing, fabricating and fixing wall panelling classified as Fire Class A as per ASTM E-8 using standard MS rectangular sections of approved quality and make, fixed firmly to the floor at base and adjacent wall/ceiling as indicated in the following specifications: a) Vertical Members- MS box section 50x25x1.6mm spaced at approximately 600mm c/c fixed firmly on floor at base and ceiling/beam at top. All the vertical members shall be extended upto the ceiling/beam level with additional aluminium angle/cleat. The MS frame shall be painted with two coats of approved anti-rust steel primer. b) Horizontal Members- MS box section 50x25x1.6mm spaced at approximately 600mm c/c welded including additional members for raceway openings. The MS frame shall be painted with two coats of approved anti-rust steel primer. c) The framing shall be covered top side using 25mm thick HDHMR board conforming to density 850–900 kg/m³ and finish with acoustic wall panel (fibre glass substrate 25mm thick , Wall Panel size 600x1200mm Nominal and shall achieve an NRC of 0.85 ) in decorative pattern using with fabric/1mm laminate outside of panelling as per design/direction of approval of Bank's Engineer. Note: Measurement shall be made on the exposed surface only. |
| 8 | Decorative Wall Panelling |
| 9 | Providing and fixing decorative wall panelling classified as Fire Class A as per ASTM E-8 made of 25 mm thick HDHMR board density 850–900 kg/m³framework with necessary 50x25mm MS/Aluminium support members fixed to wall, finished with approved shade natural acoustic wall panel (fibre glass substrate 25mm thick , Wall Panel size 600x1200mm Nominal and shall achieve an NRC of 0.85 ) including , grooves, edge beading and complete as per approved design. The work shall include recessed centre display niche with rounded edge framing, back panelling finished in laminate/fabric , side open display shelves, all necessary hardware, finishing materials, scaffolding and making good complete in all respects as per the direction of Bank's Engineer. Note: Measurement shall be made on the exposed surface only. |
| 10 | False Ceiling |
| 11 | Providing and fixing fibreglass acoustical suspended false ceiling system with 15mm thick Sierra OP Tegular 15/90 Edge Tiles with Silhouette 15mm face exposed grid.15mm thick tiles having NRC upto 0.85 and fire performance of class A2-S1, D0 according to EN 13501-1 with 15mm Tegular 15/90◦ and 8mm drop in module size 600mm x600mm firmly fixed on G.I. grame work section of M/s Armstrong (Knauf Ceiling), M/s Saint Gobain or other approved make as per manufacturer's specifications all required and directed by Bank's Enginer. The tiles are to be fixed on profile grid system consisting of flanges. T sections and runners, Perimeter trim to be angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum , all complete as directed by Bank's engineer. Note:- Rate shall include making cut out/openings for fixing light fittings with necessary additional frame work, wastages, finishing all etc. complete. No deduction in area measurement will be made for openings not exceeding 0.4 sqm. and no extra measurement will be made in forming such opening. Horizontal plan area will be measured for payment. |
| 12 | Providing and fixing suspended second layer of false ceiling at the centra area of conference room. Central ceiling portion to consist of decorative made Vertical Linear Baffle False Ceiling made out of 60-80 micron thick powder coated finished Aluminium Extrusion in aluminium alloy grade 6063 T5 from size of 100x25x3600 mm in powder coated to Woodgrain finish tiles including grooves and edge finishing as per approved design and hanged using slotted U-Profile of 20x30x3700 mm (Thk. 1.5mm) having slots in module of 25mm to keep baffles at an on-centre spacing in multiples of 25mm . Longer lengths of baffles to be connected by Baffle joiner and the ends to be fixed with end caps and U-Profile Hanger. The item shall include provision for recessed LED downlights, hanging light fixtures, concealed cove detailing, cut-outs for electrical services, necessary supports, scaffolding and all complete as per attached design and direction of Engineer-in-Charge. Note: Measurement shall be made on the exposed surface only. |
| 13 | Providing and fixing single leaf decorative flush door of size approximately 1.0 m x 2.1 m and 0.8x2.1m made of solid hardwood/BWR grade hardwood frame with 35 mm thick factory made flush shutter finished with approved laminate of 1.00mm thick on both sides.. The shutter shall consist of vertical vision panel fitted with of 5/6mm clear glass with horizontal frosted film strip pattern as per approved pattern. The work shall include all necessary wooden beading, SS handle, lockset, tower bolts, hinges, door stopper, door closure, polishing, edge finishing, fitting and fixing complete in all respects as per approved design and direction of Engineer-in-Charge. |
| 14 | Providing and fixing waterproof WPC (Wood Polymer Composite) flush door shutter of 30/32 mm thickness for washroom use, made from high density WPC board with solid core construction, factory finished and fixed in position with approved make SS hinges, SS tower bolt, aldrop, door stopper and all necessary fittings and fixtures complete. The shutter shall be finished with approved shade laminate/PVC membrane finish on both sides including edge finishing, cutting for hardware, necessary screws and complete installation as per approved design and direction of Engineer-in-Charge. |
| 15 | Carefully dismantling and removing of existing ceramic tile or any type of flooring / skirting, sunken fillings such as cinder filling / brick bat coba / dado, etc. from toilets or wherever required including disposing off debris out of Bank's premises at approved dumping ground of local administration including all lead & lift, etc. all complete as directed by Bank’s Engineer. Note:- This item will be operated in toilets. a) Dismantling of flooring & wall dado, skirting with cement mortar bedding.(Approx. area 50 Sqm.) b) Dismantling of sunk filling including floor finish.(Approx. 5 cum) |
| 16 | Carefully dismantling and removing doors, door frames, urinal, Orrisa pan W.C. seat, washabasin, G.I. pipe line, C.I. pipe line, existing flushing cistern including flush pipe, brackets, C.P. / Brass fittings, etc. from washarea and drinking water area, stacking the serviceable materials at required places as directed, disposing of debris / unserviceable materials outside the Bank's premises, etc. all complete as directed by Bank’s Engineer. |
| 17 | Providing and laying brick bat coba to the sunken floors using best quality locally available well burnt sliced bricks in cement mortar 1 : 4 ( I cement : 4 coarse sand ) mixed with water proofing compound of approved make as per manufacturer's specifications, roughening the top layer of cement mortar / top surface of sunk filling with broom to receive the flooring, etc. all complete as directed by Bank's Engineer. Note:- No deduction for squatting / w.c.pan, C.I. pipes, etc. will be made for measurement purpose |
| 18 | Providing and applying polymer based two compound water proofing treatment to the sunken portion of the toilets, baths, kitchen, etc. by using products of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF, M/s. MC-Bouchemie or any other approved equivalent in the following steps:-a) Thoroughly cleaning of all surfaces of sunken portions to be treated.b) Grouting and injecting polymer cement slurry as per manufacturer’s specifications into the R.C.C. members till its refusal.c) Repairing the damaged portions of the R.C.C. members with polymer concrete / mortar as per manufacturer’s specifications.d) Providing and applying 20 mm. thick water proofing cement plaster 1:4 (I cement: 4 coarse sand) mixed with water proofing compound as per manufacturer’s specifications to the sunken floor and sides including rounding off junctions / corners with water proofing cement mortar, etc. all complete.e) Providing and applying a coat of polymer water proofing primer and two coats of two compound based water proofing polymer/ chemical of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF, M/s. MC-Bouchemie or any other equivalent approved make as per manufacturer’s specifications to the sunken floor, sides, etc.; testing the treated surface by ponding method for 72 hours.f) Repeat the treatment till no seepage is observed on the treated surface.g) Providing and laying 15 mm. thick protective layer of plain cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) over the treated surface. Note:- Single measurement of the sunken floor and its sides shall only be considered for payment for all sub items of work. |
| 19 | Providing and laying brick work of required thickness with best quality locally available brick in cement mortar 1:6 (1 cement : 6 coarse sand) including racking out joints, scaffolding, curing for partition walls, support walls of washbasin & platform of urinals, etc. all complete as directed by Bank's Engineer. |
| 20 | Providing, fixing, jointing and testing first quality Wall Hung WC with PP soft close seat cover, Hinges and Accessories set of approved make including jointing properly with hessian soaked in cement slurry and applying a thick layer of poly sulphide or any other approved quality sealant to the joints, etc. all complete with all labour, material, T&P. The rate shall include for disposing off debris outside the Bank's premises, etc. all complete as directed by Bank's Engineer. Note:- The basic price of Wall Hung WC with PP soft close seat cover, Hinges and Accessories set is Rs. 7,212/- each ex-showroom & excluding GST. |
| 21 | Supplying and fixing Single piece concealed cistern body (Front or Top actuation) with floor mounting frame installation kit and \\"S-Type\\" Drain pipe connection set for wall hung WC with flush control plate of approved model and make in approved manner. The rate shall include for fixing arrangement, all complete with all labour, material, T&P, disposing off debris outside the Bank's premises, etc. all complete as directed by Bank’s Engineer. Note:-The basic price of Single piece concealed cistern body (Front or Top actuation) with floor mounting frame installation kit and \\"S-Type\\" Drain pipe connection set for wall hung WC with flush control plate is Rs. 5,186/- each ex-showroom and excluding GST. |
| 22 | Providing & fixing of appx size. 490 mm. X 400 mm. x 150 mm first quality colourful vitreous chinaware wash basin of Parryware, Hindware, Jaquar or any other equivalent approved make; including fixing C. P. brass half thread waste coupling of approved make, P.V.C. connection and heavy quality P.V.C. waste pipe, , etc. all complete with all labour, material, T&P, all complete as directed by Bank’s Engineer.Note:-The basic price of Wash Basin including C.P. brass waste coupling is Rs. 4,222/- each excluding GST. |
| 23 | Providing & fixing first quality Urinal with sensor & fixing accessories set of approved make. Rate shall include for disposal of debris out of Bank’s premises, etc. all complete as directed by Bank's Engineer. Note:- The basic price of Urinal with sensor & fixing accessories set is Rs. 15,839/- each ex-showroom & excluding GST. |
| 24 | Providing & fixing Urinal Partition with fixing accessories set of approved make. Rate shall include for disposal of debris out of Bank’s premises, etc. all complete as directed by Bank's Engineer. Note:- The basic price of Urinal Partition is Rs. 4,847/- each ex-showroom & excluding GST. |
| 25 | Supplying and laying 300 mm. X 300 mm. ceramic non-skid tiles of approved make and shade, finish in flooring, laid to desired level, slope and pattern, on 20 mm. thick cement mortar 1:4 (1 cement: 4 coarse sand) bedding set in cement slurry, jointing neatly with white cement mixed with matching pigment, cleaning, curing, etc. all complete as directed by Bank's Engineer. Note:- 1. The basic rate ceramic non-skid tiles is Rs. 395.48/- per Sqm. ex-showroom & excluding GST. 2. This item will be operated in the washarea, toilet area and outer room area etc. 3. Exposed plan area shall only be measured and paid for. |
| 26 | Providing and laying approved 1st quality ceramic tiles of approved make, size and finish in dado work in toilets (Main & highlighters tiles both) laid on average 12 mm. thick cement mortar 1:3 (1cement: 3 coarse sand) bedding set in cement slurry including jointing with polymer cement grout of matching shade or white cement slurry mixed with polymer and matching pigment, cleaning, curing, making good the damages with cement mortar, cleaning, etc. all complete as directed by Bank’s Engineer. Note:- 1. Basic rate of 300 mm. X 450 mm. or any other approved size ceramic tiles is Rs. 334.80/- per Sqm. ex-showroom & excluding GST. 2. Exposed area shall only be measured and paid for. |
| 27 | Carefully taking out the existing damaged portion of cement plaster in patches, wherever required, cleaning the surface, disposing of debris out of the Bank’s premises at a suitable dump approved by local administration. Providing and applying 12 mm plain cement plaster in required thickness in cement mortar 1:4 (1 cement: 4 coarse sand) including scaffolding, curing, etc. all complete as directed by Bank’s Engineer. |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of approved heavy quality pipe of Prince, Supreme, Finoles, Astral or any approved brand having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at desired spacing. This includes jointing of pipes, fitting with existing GI pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as directed by Bank's Engineer.The rates includes making chases up to 7.5x7.5 cm in walls/floors including making good and finishing with matching surface after housing CPVC pipe all complete as directed by Bank's Engineer.The rates shall include Concealed work, including cutting chases and making good the walss etc. 20 mm nominal dia Pipes |
| 29 | Providing and fixing in position approved heavy quality following size sand cast iron pipes for concealed / exposed work using pipes in required length with specials of NECCO, CICO or any other equivalent approved make for soil / waste line with all fittings and specials like bends, junctions with or without door Tee, etc. including lead caulking or filling deep seal into the joints, making connection with C.I. trap, existing lines, gully traps, manholes, cutting holes in the walls, closing the same with cement concrete and finishing with cement mortar, providing and fixing heavy quality M.S. clamps, etc. The rate shall also include for scaffolding, testing, etc. all complete as directed by Bank's Engineer |
| 30 | 75 mm. diameter |
| 31 | 100 mm. diameter |
| 32 | Providing and fixing in position and testing 100 mm. X 75 mm. diameter approved heavy quality sand cast iron floor trap including making connection with the existing / new pipe line with lead caulking or filling deep seal into the joints, etc. all complete as directed by Bank's Engineer. |
| 33 | Providing, fixing and testing following C.P. brass bath room and other fittings of approved quality with flange wherever applicable, etc. all complete as directed by Bank’s Engineer. |
| 34 | Required sized C.P. Brass fittings:- Angular stop cock with wall flange. Note:- Basic rate of Angular stop cock with wall flange is Rs. 759/- each ex-showroom & excluding GST. |
| 35 | Regular body of Concealed stop cock and Exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal Note:- Basic rate of Regular body of Concealed stop cock and Exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal is Rs. 1,260/- each ex-showroom & excluding GST. |
| 36 | Hand shower (health faucet) with 8 mm. diameter, 1.20 mt. long flexible tube & wall hook with N.R.V. (Back Flow Preventer) Note:- Basic rate of Hand shower (health faucet) with 8 mm. diameter, 1.20 mt. long flexible tube & wall hook with N.R.V. (Back Flow Preventer) is Rs. 759/- each ex-showroom & excluding GST. |
| 37 | Two way bib cock with wall flange Note:- Basic rate of Two way bib cock with wall flange is Rs. 1,373/- each ex-showroom & excluding GST. |
| 38 | Pillar cock Note:- Basic rate of pillar cock is Rs. 1,411/- each ex-showroom & excluding GST. |
| 39 | C.P. Brass bath fittings & accessories:- Double coat hook Note:- Basic rate of Double coat hook is Rs. 603/- each ex-showroom & excluding GST. |
| 40 | Toilet Roll Holder Note:- Basic rate of Toilet Roll Holder is Rs. 752/- each ex-showroom & excluding GST. |
| 41 | Approved heavy quality miscellaneous plumbing and sanitary fittings & fixtures:- 100 mm. stainless steel floor trap grating |
| 42 | Providing & fixing 17 to 18 mm. thick 600 mm. (approx.) width and maximum available length in market mirror polished jet black or lakha red or any other approved colour granite stone slabs on washbasin/urinal platform fixing the same to the R.C.C./brickwork platform with cement mortar, cutting suitable size opening with rebates for fixing washbasins making hole for pillar cocks if required. The rate shall include for making half round mirror polished molding on all free / exposed eges including wastage, etc. all complete as directed by Bank's Engineer. Note:- 1. This item will be operated in toilets. 2. Exposed plan area shall only be measured for payment. 3. The basic rate is Rs. 3,765/- per Sqm. Ex-showroom & excluding GST. |
| 43 | Supplying and fixing 8 mm. thick required size approved quality float glass mirror of Modi or Saint Gobain or any other any approved make with required size bracket (Stud) approved quality fixing arrangement, etc. all complete as directed by Bank's Engineer. |
| 44 | Removing/scraping/cleaning the existing wall surface, prepare even surface by using putty up to required level, if required. Providing and applying a base coat of Interior cement primer of approved manufacture and two or more coats of premium acrylic/plastic emulsion paint of approved make and shade (approved brands mentioned in list of approved materials) as per the manufacturers specifications to the interior surfaces of walls, ceilings, beams, columns, etc. The rate shall include for scaffolding, properly cleaning of the site after completion of the aforementioned work. The contractor is strictly advised to take all the safety measure for labour to carry out the work, etc. all completed as directed by Bank’s Engineer. (Tentative Area 200 Sqm.) |
| 45 | Rebate for taking away old G. I. pipes, C. I. pipes, plumbing and sanitary fittings & fixtures such as G.I. fittings, taps, wash basins, mirrors, towel rods, porcelain shelves, flushing cistern, sensors, etc. taken out under various tender items from toilets, etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender