Tender For Repairs And Resurfacing Of Bituminous Road At Esh, Stupa Road And F&A Road Area Inside Factory
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Oct 2026
17 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Resurfacing Of Bituminous Road At Esh, Stupa Road And F&A Road Area Inside Factory
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc (not exceeding) 15 cm deep in Hard/dense soil cutting or uprooting grass including cleaning thick vegetation /bushes on earth, removing bubbish off the premises , cleaning surface complete all as specified and as directed. |
| 2 | Rough excavation not exceeding 1.5 m deep and getting out in hard dence soil. |
| 3 | M & L for Cement concrete in Type D2 1:4:8 (40 mm graded aggregate) for foundations, filling and mass concrete |
| 4 | M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less. |
| 5 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ (Thickness of concrete slab 100mm ) |
| 6 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. |
| 7 | M & L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm. |
| 8 | M & L for providing and applying evenly a priming /tack coat with bituminous primer at 10 kg per 10 Sq.m confirming to IS 8887. |
| 9 | M&L of Bituminous semi dense concrete 40mm consolidated thickness with with paving bitumen VG-30 with 5.5% binder content by weight of total mix,using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 10 | M & L for laying Premix bituminous, macadam using paving bitumen of VG-30grade laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less (binder content 4 % by weight) as correction layer for maintaining chamber and gradient as per requirement. |
| 11 | M & L for providing and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engineer-in-charge. |
| 12 | M& L of Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 70 mm tk. |
| 13 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade With Grey Cement and no pigment |
| 14 | M&L Type B1 1:2:4 20 mm , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 15 | M & L for Sand filling under floors or in foundations including watering and consolidation |
| 16 | M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less |
| 17 | Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender