Tender For Maintenance/Repair Of Various Types Of Steel/Wooden Furniture Of Certain Unit Under Ge K Tee.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Oct 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance/Repair Of Various Types Of Steel/Wooden Furniture Of Certain Unit Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | CHAIR DINING FD-273,279 |
| 2 | Removing of old unserviceable rear leg of chair dining and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 3 | Removing of old unserviceable front leg of chair dining and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 4 | Removing of old unserviceable front rail/side rail/ back rail of chair dining and supply and fixing with new front rail/side rail/ back rail of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 5 | Removing of unserviceable bottom stiffener of chair dining and supplying and fixing with new bottom stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 6 | Removing of unserviceable back rest of chair dining and supplying and fixing with new back rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 7 | Removing of unserviceable cane stiffener of chair dining and supplying and fixing with new cane stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 8 | Removing of old cane from chair dining (bottom) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. |
| 9 | M&L for preparation of old/new chair dining and polishing of high gloss french polish of chair dining complete all as specified & directed. |
| 10 | TABLE CENTRE 900x450 mm FD-235/274 |
| 11 | Removing of old unserviceable long rails of Table centre 900mmx450mm and S& F new Long rail made out 1st class teak wood complete all as specified and directed. |
| 12 | Removing of old unserviceable shortrails of Table centre 900mmx450mm and S& F new short rail made out 1st class teak wood complete all as specified and directed. |
| 13 | Removing of old unserviceable legs of Table centre 900mmx450mm and S& F new legs made out 1st class teak wood complete all as specified and directed. |
| 14 | Re-tighting the Joints of Frame of table centre 900mmx450mm duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed. |
| 15 | Removing of old unserviceable top of Table centre 900mmx450mm and S& F new Top made out Prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'Top' duly french polished complete all as specified and directed. |
| 16 | PEG TABLE FD-227/277 |
| 17 | Removing of old unserviceable long rails of peg table and S& F new Long rail made out 1st class teak wood complete all as specified and directed. |
| 18 | Removing of old unserviceable shortrails of peg table and S& F new short rail made out 1st class teak wood complete all as specified and directed. |
| 19 | Removing of old unserviceable legs of peg table and S& F new legs made out 1st class teak wood complete all as specified and directed. |
| 20 | Re-tighting the Joints of Frame of peg table duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed. |
| 21 | Removing of old unserviceable top of peg table and S& F new Top made out Prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'Top' duly french polished complete all as specified and directed. |
| 22 | TABLE 900 x 600 WITH DRAWERS FD-284 |
| 23 | Removing of old unserviceable long rails of table 900mm x 600mm with drawer and supplying and fixing new long rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 24 | Removing of old unserviceable short rails of table 900mm x 600mm with drawer and supplying and fixing new short rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 25 | Removing of old unserviceable legs of table 900mm x 600mm with drawer and supplying and fixing new legsl made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 26 | Re-tighting the joints of frame of table 900mm x 600mm with drawer duly provided new boopins pins as per requirement and making tight all lose components complete all as specified & directed and as shown in drg. |
| 27 | Removing of old unserviceable box including drawers of table 900x600 and supplying and fixing new drawers shall be of 18 mm thick prelaminated prticle board except back side and back shall be made of 6mm thick commercial plywood complete all as specified & directed and as shown in drg |
| 28 | Removing of old unserviceable top of table 900mm x 600mm with drawer and supplying and fixing new top made out of prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'top' duly french polished complete all as specified & directed and as shown in drg. |
| 29 | GI PIPE CHARPOY NEWAR INTO GI PIPE PLYTOP FD-220(M), 227 :- |
| 30 | Removing of old unserviceable plytop / newar from GI charpoy and supply & fixing two Nos stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail. The stiffners shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 31 | Removing old unserviceable plywood from charpoy plytop and welding of old broken stiffners pipe and re-fixing plywood in charpoy complete all as specified and directed. |
| 32 | Removing of old unserviceable long rails having both threaded broken end and supply & fixing new long rail made out of GI tubing 32mm bore medium grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed. |
| 33 | Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and supply & fixing new short rails of GI charpoy obtained from Srl Item No 7(c) above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed. |
| 34 | Removing of old unserviceable leg and supply & fixing new leg made out of short rail of GI charpoy obtanied from Srl item No. 7 (d) above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing. |
| 35 | Removing of old unserviceable GI elbow three way and supply & fixing of new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed. |
| 36 | Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed. |
| 37 | Supply & fixing new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed.(Note:- Each corner of plywood should be round shaped). |
| 38 | Charpoy Hard Top (FD/MAP-II/01) FD/MAP-II/01 |
| 39 | Supply and fixing of stiffener (including welding) made of 25 mm square MS pipe (16 gauge) in replacement of old unserviceable stiffener all as per drawing and as directed. |
| 40 | Supply and fixing of 12 mm thick plywood BWR grade type 'A' of size 1930x850mm confirming to IS -303 of 1975 (ISI marked) in replacement of old unserviceable plywood all as per drawing. |
| 41 | Supply and fixing of thick hard rubber shoes of size 32 mm square (Inner size) in replacement of unserviceable hard rubber shoe all as per drawing. |
| 42 | M&L for painting of frame of charpoy with hard top with two coats of synthetic enamel black paints including welding where required and preparation of surfaces |
| 43 | CHAIR VARANDAH FD-1031,359 |
| 44 | Removing of old cane from chair varandah steel (bottom and back) and re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed. |
| 45 | M&L for painting to frame of chair varandah two caots with white synthetic paint after preparation of surface (after removing the old cane) complete all as specified and directed. |
| 46 | M&L for gas welding to frame of chair varandah including preparation of surface and removing the unwanted welding spot complete all as specified and directed. |
| 47 | S&F in replacement of unserviceable portion of frame of chair varandah with 20mm conduit pipe of wall thickness 1.60mm duly gas welding complete all as specified and directed. |
| 48 | S&F in replacement of hard rubber shoe to the leg of chair varandah of standerd approved quality complete all as specified and directed. |
| 49 | LOCKER BED SIDE STEEL FD-1029 :- |
| 50 | Removing of old unserviceable hasp and staple and supply & fixing of new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed. |
| 51 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 52 | Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 53 | Removing of old unserviceable leg of size 600mmx80mmx100mm and supply & fixing of new leg of size 600mmx80mmx100mm made out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 54 | Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed. |
| 55 | Material and labour for re-painting of mentioned below steel furnituire as per the following steps:-(a) Denting of bent surfaces with the help of hammer in best workmanship manner.(b) Removing old paint by scrubbing with sand paper 150 No thoroughly.(c) Applying one coat of metal primer. (Make Asian/Nerolac/Delux).(d) Applying metal putty to even surface.wait period 2-3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No and paper and spraying little amount of water simultaneously.(e) Wipe the surface with solt dry cloth and apply one coat of enamel paint of light shade as approved by GE. |
| 56 | Almirah large steel with shelves. FD-1031/67 |
| 57 | Almirah Med steel with shelves. FD-1032/243 |
| 58 | Locker bed side steel. FD-1029 |
| 59 | Rack adjustable steel 4 tier FD/106/M |
| 60 | Table dining OR's Aluminium Top FD-165(M) |
| 61 | Teapoy Verandah FD-35,255,121,383 |
| 62 | Stool Steel FD-81(M), FD-1026 & FD - 103 |
| 63 | ALMIRAH LARGE STEEL WITH SHELVES FD-67(M), FD-1031(M), DB-4049 :- |
| 64 | Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 65 | Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 66 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 67 | Removing of old unserviceable three way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 68 | Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 69 | Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed. |
| 70 | Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made to shape as per given in drawing and site requirement complete all as specified and directed. |
| 71 | Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 72 | ALMIRAH SMALL STEEL WITH SHELVES FD-1032:- |
| 73 | Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 74 | Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 75 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 76 | Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed |
| 77 | Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 78 | Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed |
| 79 | Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per give in drawing and site requirement complete all as specified and directed. |
| 80 | Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed. |
| 81 | CHAIR WRITNG OFFICER FD/E6/MAP/12 |
| 82 | Removing old unserviceable Seat of chair writing offr and supply & fixing New seat of chair writng offr all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed. |
| 83 | Removing old unserviceable back of chair writing offr and supply & fixing new back of chair writing offr all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed. |
| 84 | Removing old unserviceable cover cloth of (seat and back) from existing chair writing offr. S & F of new fabric cloth duly approved by GE, shall be used for seat and back of existing chair computer as specified and directed. |
| 85 | Removing old unserviceable Arms rest of chair writing offr and supply & fixing new arms rest of computer chair all as per drawing and directed. Note : Arm Rest shall be polyurethene \\"D\\" shape. |
| 86 | M&L for gas welding to frame of chair writing offr including preparation of surface and removing the unwanted welding spot complete all as specified and directed. |
| 87 | CHAIR CBA OFFICE STEEL WITH ARMS FD-120(M) (R) :- |
| 88 | Dismantling of existing UNSV seat of chair CB office steel with arms and supply and fixing new seat of teak wood duly canning with plastic cane 2mm wide half round providing 3mm wide flat cane border around the seat and french polishing in black Colour on wooden surface all as approved by Engr-in-Charge and as specified and shown in drg canning shall be done in Godrej pattern |
| 89 | All as per item No. 13.10 above but back. |
| 90 | Dismentling of existing UNSV broken cleats and supply and fixing of new MS flat Iron 25x3mm and 535mm long two Nos by welding all as directed by Engr-in-charge and specified and shown in drg. |
| 91 | Removing of Old/UNSV armrest and supply and fixing new arms rest of seasoned teak wood duly french polish in black colour etc all as approved by Engr-in-Charge and as specified and shown in drg. |
| 92 | Repainting of steel frame with two coat of OG synthic enamel paint after scrapping/cleaning surface by sand paper for smooth painting as directed by Engr-in-Charge. |
| 93 | Supply and fixing PVC new Plug of approved quality by Engr-in-Charge to chair tubler steel after removing existing UNSV. |
| 94 | Rack Adjustable steel Shelving 6 Tier FD-1038 |
| 95 | Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 96 | Removing of old unserviceable MS shelf made to shape out of 18 gauge thick MS sheet and supply & fixing of new MS shelf made to shape out of 18 gauge thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 97 | Spray painting of Steel Reck with two coat of OG synthic enamel paint after scrapping/cleaning surface by sand paper for smooth painting as directed by Engr-in-Charge. |
| 98 | TABLE OFFICE STEEL (CLERK/STEEL) FD-1003/FD-1004:- |
| 99 | Removing of old unserviceable legs made of MS conduit/square pipe and supply & fixing new legs made out of MS conduit/square/pipe of size 25mm dia and 1.6mm wall thickness complete all as specified and directed. |
| 100 | Removing of old unserviceable drawers with telescopic channel and lock 6 lever complete and supply & fixing new MS drawers made out of 1mm thick MS sheet with lock of 6 lever, drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be fixed in the table complete all as specified and directed. |
| 101 | Removing of old unserviceable drawers cabinet shutter and supply & fixing new MS cabinet shutter, shutter made out of 1mm thick MS sheet with groove duly covered with pvc to pull the shutter out complete all as specified and directed |
| 102 | Removing of old unserviceable Pre-laminated particle board top of clerk table and supply & fixing new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and directed. |
| 103 | Material and labour for welding to broken joints of frame of table complete all as specified and directed, |
| 104 | Supply & fix in repair of hard rubber shoe to the leg of table of standard approved quality complete all as specified and directed. |
| 105 | Table 900x900x760mm FD-88(M), FD-223, FD-291 |
| 106 | Removing of old unserviceable long rails of table 900mm x 900mm and supplying and fixing new long rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 107 | Removing of old unserviceable short rails of table 900mm x 900mm and supplying and fixing new short rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 108 | Removing of old unserviceable legs of table 900mm x 900mm and supplying and fixing new legs made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 109 | Re-tighting the joints of frame of table 900mm x 900mm duly provided new ba,boopins as per requirement and making tight all lose components complete all as specified & directed and as shown in drg. |
| 110 | Removing of old unserviceable top of table 900mm x 900mm and supplying and fixing new top made out of prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'top' duly french polished complete all as specified & directed and as shown in drg. |
| 111 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 45,452.00] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender