Tender For special Reapir To Bldg No 36 (Incineration) And P-91 (Toilets) & Provn Of 01(One)X Toilet And Bathroom For Bldg Nop-01(Gorakha House), 20(Twenty) X Security Lights With Pole At Grd Complex Gorakhpur Mil Stn Under Ge(Af) Gorakhpur.
Tender Value
18.89 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
3 days left
EMD
37800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Reapir To Bldg No 36 (Incineration) And P-91 (Toilets) & Provn Of 01(One)X Toilet And Bathroom For Bldg Nop-01(Gorakha House), 20(Twenty) X Security Lights With Pole At Grd Complex Gorakhpur Mil Stn Under Ge(Af) Gorakhpur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Oct-2026 | BOQ CORRIGENDUM | BOQ | 14-Oct-2026 |
| 2 | 14-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF) Gorakhpur Name of Work: SPL REAPIR TO BLDG NO 36 (INCINERATION) AND P-91 (TOILETS) & PROVN OF 01(ONE)X TOILET AND BATHROOM FOR BLDG NOP-01(GORAKHA HOUSE), 20(TWENTY) X SECURITY LIGHTS WITH POLE AT GRD COMPLEX GORAKHPUR MIL STN UNDER GE(AF) GORAKHPUR. Contract No.: GE(AF)/GKP/E-54 OF 2026-27 File No. 9502/E8 Serial Page No.15 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Descripion of items Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth;and getting out any type of soil. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm |
| 5 | Removing surplus excavate soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 6 | M & L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 7 | M&L for moorum/red bajri filling in floors/sub base or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed incl watering. |
| 8 | M&L for PCC 1:4:8 type D-2 (using 40mm stone aggregate) as in foundation etc |
| 9 | M&L for M-25 (20mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs,under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | M&L for M-25 (20mm graded aggregates) Columns,pillars, piers, posts and struts complete all as specified and directed. |
| 11 | M&L for M-25 (20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span |
| 12 | M & L for M-25 (20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 13 | Use and waste of formwork to side of concrete foundation,footing,bases of columns,rafts and raft beams,side and soffit of foundation and plinth beams flat,for rough finished surfaces of concrete complete all as specified |
| 14 | Use and waste of formwork to side of pillars,columns and stanchions,square or rectangular,for rough finished surface of concrete complete all as specified |
| 15 | Use and waste of formwork to Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, ressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface of concrete complete all as specified |
| 16 | Use and waste of formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopingfor rough finished surface of concrete complete all as specified |
| 17 | Use and waste of formwork to Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surface of concrete complete all as specified |
| 18 | M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified. |
| 19 | M&L mild steel TMT 6mm to 8mm dia as in striuups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified. |
| 20 | Demolition of brickwork and portions ordered to be dismantled built in cement mortar or cement lime mortar complete all as specified as directed. |
| 21 | M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified as directed. |
| 22 | M&L 75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate in Sub base, hard standing , plinth protection etc finished the surface even & smooth without using extra cement. |
| 23 | Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters. complete all as specified as directed. |
| 24 | M&L rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete. |
| 25 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note 1: - Supply only water proofing compound shall be measured and paid for separately. 2. Cost of scafolding for rendering is incuded in this item. 2: Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick. |
| 26 | M&L rendering 5mm thick 1:3 CM on fair face of concrete surface on ceiling finished even and smooth without using extra cement |
| 27 | Supply only liquid water proofing compound complete all as specified and directed. |
| 28 | M&L for preparation of newly plastered of surface and three coat of white wash on wall surface incl complete. |
| 29 | Preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of putty with roller complete all as specified as directed. |
| 30 | M&L for preparation of newly plastered of surface and three coat of white wash on ceiling surface incl complete. |
| 31 | Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of distemper oil emultion complete all as specified as directed. |
| 32 | M&L for old preparation of surface and two coat of white wash on old ceiling surface incl complete. |
| 33 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer/putty complete all as specified as directed. |
| 34 | M&L for 40 mm thick plain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded stone aggregate) as in sub bases of floors finished even and fair. |
| 35 | S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete. |
| 36 | M&L for coloured glazed digital ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete all as specified and directed. |
| 37 | S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 38 | S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 39 | S&F rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I |
| 40 | S&F 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed |
| 41 | S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) including provision of lime concrete bedding with Traps ‘P’ or ‘S’ complete in all respect all as specified Make - Jaquar or equavalent as approved by GE. |
| 42 | S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. Make-Cera/Somany or equivalent |
| 43 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make - Jaquar or equavalent as approved by GE. |
| 44 | S & F Wall mixer 3-in- system with provn for both hand shower and Over head shower complete with 115 mm long bend pipe, connection legs and flange ( with out hand and overhead shower). |
| 45 | S&F vitreous china wash basin white Angle back size 400mmx 400mm including brackets, brass chromium plated waste fittings and PVC waste pipe including cutting for and pinning in ends of bracket & waste pipe fixed in repairs. complete all as specified as directed. |
| 46 | S&F 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed. |
| 47 | S&F chromium plated shower rose fixing with 15mm bore pipe min 40 grms including arm 15 mm size 195mm long with bend min wt 40 gms complete all as specified. |
| 48 | S& F Soap dish, any type, fixed toplugs with chromium plated.brass screws |
| 49 | Supply and fix 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe all as specified and directed. |
| 50 | S&F angle valves, 15 mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed all as specified and directed. Make- Essco or equivalent. |
| 51 | S&F CP bottle trap 32/40mm dia for WHB having minimum water seal 25mm complete all as specified and as directed. |
| 52 | S & F Towel rack with lower hanger (stainless steel) with hook with chrome finish (Jaquar AHS-CHR-1581H) |
| 53 | S&F sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified. |
| 54 | S&F mirror of selected quality glass ,size of 450mmx600mm mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 55 | S & F Two way Angle valve 15 mm bore complete all as specified and directed |
| 56 | S&F CP Grating doom 125 mm dia with waste hole complete all as specified as directed. |
| 57 | S&F PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed. |
| 58 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 59 | M&L 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement. |
| 60 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 61 | S&F 75mm PVC (SWR) bends anyradius |
| 62 | S&F 110mm PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors |
| 63 | S&F 110mm PVC (SWR) bends any radius |
| 64 | S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solventcement |
| 65 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 66 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for. |
| 67 | M&L 75mm thick PCC type B-1, (1:3:6) using 20mm graded stone aggregate in Sub base, hard standing , plinth protection etc finished the surface even & smooth without using extra cement. |
| 68 | M&L 75 mm PCC (1:4:8 ) type D2 using 40 mm graded aggregate as in sub base floor . |
| 69 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 70 | S & F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed. |
| 71 | M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in coping and similar works incl necessary from work all as specified. |
| 72 | M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed |
| 73 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 74 | S&F 100mm size butt hinges medium weight cold rolled milled steel all as specified. |
| 75 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section conplete. |
| 76 | M&L for 125mm size Aluminium handle cast type anodiesd complete all as specified as directed. |
| 77 | S&F 75 mm size butt hinges medium weight cold rolled milled steel all as specified. |
| 78 | M&L for 150 mm size Aluminium handle cast type anodiesd complete all as specified as directed. |
| 79 | Demolition of brick tiles flat or edges pointed in any type of mortar complete all as specified and directed. |
| 80 | Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complite all asspecified and directed. |
| 81 | M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed. |
| 82 | M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately) |
| 83 | M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface(ii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iii) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm(iv) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed. |
| 84 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 85 | M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed. |
| 86 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises . |
| 87 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing. |
| 88 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & Drg. |
| 89 | S&F 4.8 mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square including hacking out old glass of any description complete all as specified and as directed. |
| 90 | Vitreous China squatting plate urinal |
| 91 | S&F in repair Vitreous China Urinal, stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder |
| 92 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting ,DB etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 93 | Material and labour for point wiringof one light, fan, bell point controlled by one switch. with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed. |
| 94 | Dito as above but for One 5 Amps switch socket outlet point on an independent board….... |
| 95 | All as per item above but for point wiring for power point with 2.5 Sqmm (nominal area) PVC insulated copper cable 1100 Volt grade drawn through and including heavy duty PVC conduit ISI marked as required at site along with accessories with 1.5 Sq mm PVC insulated stranded copper conductor cable connected to common earth dolly with all accessories for 15 Amps socket point. |
| 96 | M&L Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed by Engr-in-Charge. |
| 97 | M&L for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified & directed. |
| 100 | M&L for ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed. Make : Anchor / Cona / Havells) |
| 101 | M&L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings |
| 102 | S&F Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 103 | S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 104 | Supply and fix in replacement of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 105 | Supply and fix in replacement of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 106 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 107 | Supply and fixing in replacement GI Pipe bend to shape 0.75 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall complete all as specified and directed. |
| 108 | Supply and fixing factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand |
| 109 | Supply and fixing MCB SPN 240 volt 'C' curve 10 KA SPN 32 Amps capacity all as specified and directed incl taking down old one. |
| 110 | Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 Amps complete all as specified and directed |
| 111 | Supply and fixing MCB single pole 240 volt 'B' curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one. |
| 112 | Supply and fix exhaust fan made of steel body complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed. |
| 113 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section 2 Core in service connections |
| 114 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section 4 Core in service connections |
| 115 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 116 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including 3 core cable from SMC Junction box to street light fittings complete all as specified and directed. |
| 117 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed. |
| 118 | Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for cable, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil for cable and Pole complete all as specified and directed. |
| 119 | Ditto as above but depth beyond the 1.5m in depth for pole. |
| 120 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 121 | Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 122 | Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for the purpose of payments. |
| 123 | Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed. |
| 124 | M/L for Cement concrete in foundation filling for Pole (40mm graded Agg) 1:4:8 D2 complete all as specified and directed. |
| 125 | M/L for cement concrete for coping in 20mm graded aggregerate 1:3:6 type C1 complete all as directed |
| 126 | Supply and lay GI tube light grade with all fittings and fixed complete to walls and ceilings or laid in floors of size 50 mm dia all as specified and directed |
| 127 | Boring of holes under road, pavement, hard standing manually including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed. |
| 128 | S&F in position new SMC (Sheet moulding compound)Junction boxes of size 280mm X 170mm X 130 mm depth. The box shall provided with and including 2 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including one no. MCB SP 230 volts 6 amps of make- Sintex , Siemens/L&T /Havells/Standard and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI clamps,nuts,bolts & washers complete all as specified and directed by Engineer-in-Charge.. |
| 129 | Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (8.5 metres long) complete all asspecified and directed. |
| 130 | Supply and fix 2.5 sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade draw from junction box to street light fitting complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender