Petroleum and Natural Gas Boards / Undertakings / PSU Closing in 2 days TDR #57793485

Tender For Supply Of Electrical Cables Trays For Pfcc And Gds Unit At Nrep

Issued by Boards / Undertakings / PSU · Golaghat, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Golaghat → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Supply Of Electrical Cables Trays For Pfcc And Gds Unit At Nrep = Limited

BOQ

Name of Work:- SUPPLY OF ELECTRICAL CABLES TRAYS FOR PFCC AND GDS UNIT AT NREP
Sl. No. Item Description
1SUPPLY OF ELECTRICAL CABLES TRAYS FOR PFCC AND GDS UNIT AT NREP Project including TPI Charges as specified in Material Requisition.
2Cable Trays Perforated (GI) (Length 3 mtr per piece) including required hardware as per Installation dwg
350 mm wide
4100 mm wide
5150 mm wide
6GI Coupler plates with 3 mm thick, 4 holes on both the sides of size M10 hole & M8 hardware (along with necessary fixing hardware – stainless steel (SS304) nut, bolt, lock-nut) for 50/100/150 W perforated cable trays mentioned above. (Note : 1 no. set = 2 nos. coupler plates each)
7LADDER TRAY & ACCESSORIES
8156P12-12-144Straight, Series 156, PG Steel, Ladder, 12\\" Rung, 12\\" W x 4\\" D x 144\\" L300mm wide ladder type cable tray, 3m straight piece
9156P12-24-144Straight, Series 156, PG Steel, Ladder, 12\\" Rung, 24\\" W x 4\\" D x 144\\" L600mm wide ladder type cable tray, 3m straight piece
10GI Coupler plates with 3 mm thick, 4 holes on both the sides of size M10 hole & M8 hardware (along with necessary fixing hardware – stainless steel nut, bolt, lock-nut) for 150/300/450/600 W ladder type cable trays mentioned above. (Note : 1 no. set = 4 nos. coupler plates each)
114P-12-30HB1230 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 30 degree horizontal bend (Bending radius 300mm)
124P-12-30VO1230 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 30 degree vertical outside bend (Bending radius 300mm)
134P-12-45HB1245 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 300mm)
144P-12-45HB2445 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 600mm)
154P-12-45VI1245 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 300mm)
164P-12-45VI2445 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 600mm)
174P-12-45VO1245 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 300mm)
184P-12-45VO2445 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 600mm)
194P-12-90HB1290 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 300mm)
204P-12-90HB2490 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 600mm)
214P-12-90HB3690 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 900mm)
224P-12-90VI1290 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 300mm)
234P-12-90VI2490 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 600mm)
244P-12-90VI3690 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 900mm)
254P-12-90VO1290 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 300mm)
264P-12-90VO2490 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 600mm)
274P-12-90VO3690 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 900mm)
284P-12-HT12Horizontal Tee, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated Horizontal Tee (Bending radius 300mm)
294P-24-12HT24Horizontal Reducing Tee, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated Reducing Horizontal Tee (Bending radius 600mm)
304P-24-30HB1230 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree horizontal bend (Bending radius 300mm)
314P-24-30HB2430 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree horizontal bend (Bending radius 600mm)
324P-24-30VI1230 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical inside bend (Bending radius 300mm)
334P-24-30VI2430 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical inside bend (Bending radius 600mm)
344P-24-30VO1230 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical outside bend (Bending radius 300mm)
354P-24-30VO2430 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical outside bend (Bending radius 600mm)
364P-24-45HB1245 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 300mm)
374P-24-45HB2445 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 600mm)
384P-24-45HB3645 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 900mm)
394P-24-45VI1245 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 300mm)
404P-24-45VI2445 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 600mm)
414P-24-45VI3645 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 900mm)
424P-24-45VO1245 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 300mm)
434P-24-45VO2445 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 600mm)
444P-24-45VO3645 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 900mm)
454P-24-60HB1260 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 60 degree horizontal bend (Bending radius 300mm)
464P-24-90HB1290 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 300mm)
474P-24-90HB2490 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 600mm)
484P-24-90HB3690 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 900mm)
494P-24-90VI1290 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 300mm)
504P-24-90VI2490 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 600mm)
514P-24-90VI3690 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 900mm)
524P-24-90VO1290 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 300mm)
534P-24-90VO2490 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 600mm)
544P-24-90VO3690 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 900mm)
554P-24-HT12Horizontal Tee, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated horizontal TEE (Bending radius 300mm)
564P-24-HT24Horizontal Tee, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated horizontal TEE (Bending radius 600mm)
574P-24-RR12Right Reducer, Series 2, PG Steel, Ladder, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated right Reducer
584P-24-SR12Straight Reducer, Series 2, PG Steel, Ladder, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated Straight Reducer
594P-24-LR12Left Reducer, Series 2, PG Steel, Ladder, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated Left Reducer
604P-12-60VO1260 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 60 degree vertical outside bend (Bending radius 300mm)
61Horizontal Adjustable Connector type coupler plate (90mm x 220mm x 3mm thk)
62Clamps for fixing 45 degree Horizontal & Vertical Cable Tray cover along with necessary fixing hardware – stainless steel (SS304) nut, bolt, lock-nut for ladder type cable trays mentioned above.
63Clamps for 300 mm wide tray
64Clamps for 600 mm wide tray
65Cable Tray Covers (GI) (Length 3 mtr per piece)
66150 mm wide
67300 mm wide
68450 mm wide
69600 mm wide
70Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
71300 mm wide
72600 mm wide
73Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
74300 mm wide
75600 mm wide
76Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
77300 mm wide
78600 mm wide
79Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-1200 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
80300 mm wide
81600 mm wide
82Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
83300 mm wide
84600 mm wide
85Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
86300 mm wide
87600 mm wide
88Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
89300 mm wide
90600 mm wide
91Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-1200 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
92300 mm wide
93600 mm wide
94Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
95300 mm wide
96600 mm wide
97Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
98300 mm wide
99600 mm wide
100Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
101300 mm wide
102600 mm wide
103Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-1200 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
104300 mm wide
105600 mm wide
106Pre Fabricated Tray Cover for Horizontal 450 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
107300 mm wide
108600 mm wide
109Pre Fabricated Tray Cover for Horizontal 450 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
110300 mm wide
111600 mm wide
112Pre Fabricated Tray Cover for Horizontal 450 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
113300 mm wide
114600 mm wide
115Pre Fabricated Tray Cover for inside Vertical 450 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
116300 mm wide
117600 mm wide
118Pre Fabricated Tray Cover for inside Vertical 450 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
119300 mm wide
120600 mm wide
121Pre Fabricated Tray Cover for inside Vertical 450 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
122300 mm wide
123600 mm wide
124Pre Fabricated Tray Cover for Outside Vertical 450 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
125300 mm wide
126600 mm wide
127Pre Fabricated Tray Cover for Outside Vertical 450 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
128300 mm wide
129600 mm wide
130Pre Fabricated Tray Cover for Outside Vertical 450 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
131300 mm wide
132600 mm wide
133Pre Fabricated Tray Cover for Cable Tray Reducer with 2 nos. fixing clamps along with necessary SS304 hardware
134600 to 300 mm Reducer, Right Hand Side
135601 to 300 mm Reducer, Left Hand Side
136300 to 150 mm Reducer, Right Hand Side
137300 to 150 mm Reducer, Left Hand Side
138Pre Fabricated Tray Cover for Equal Tee’s (Bending Radius-300 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
139300 mm wide
140600 mm wide
141Pre Fabricated Tray Cover for Equal Tee’s (Bending Radius-600 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
142300 mm wide
143600 mm wide
144Pre Fabricated Tray Cover for Equal Tee’s (Bending Radius-900 mm) with 3 nos. fixing clamps along with necessary S3304 hardware
145300 mm wide
146600 mm wide
147Pre Fabricated Tray Cover for Unequal Tee’s (Bending Radius-300 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
148300 x 300 x 150 mm wide
149600 x 600 x 150 mm wide
150600 x 600 x 300 mm wide
151Pre Fabricated Tray Cover for Unequal Tee’s (Bending Radius-600 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
152300 x 300 x 150 mm wide
153600 x 600 x 150 mm wide
154600 x 600 x 300 mm wide
155Z Clamps for Holding Horizontal Cable Tray, Material - HDGI, thickness - 2 mm with necessary fixing hardware with (with M12 hole & M10 hardware SS304 nut, bolt, lock-nut)
156Separators for Cable Ladders (GI)
157300 mm / 600 mm wide
158SUPPLY OF ELECTRICAL CABLES TRAYS FOR PFCC AND GDS UNIT AT NREP Project including TPI Charges as specified in Material Requisition.
159Cable Trays Perforated (GI) (Length 3 mtr per piece) including required hardware as per Installation dwg
16050 mm wide
161100 mm wide
162150 mm wide
163GI Coupler plates with 3 mm thick, 4 holes on both the sides of size M10 hole & M8 hardware (along with necessary fixing hardware – stainless steel (SS304) nut, bolt, lock-nut) for 50/100/150 W perforated cable trays mentioned above. (Note : 1 no. set = 2 nos. coupler plates each)
164LADDER TRAY & ACCESSORIES
165156P12-12-144Straight, Series 156, PG Steel, Ladder, 12\\" Rung, 12\\" W x 4\\" D x 144\\" L300mm wide ladder type cable tray, 3m straight piece
166156P12-24-144Straight, Series 156, PG Steel, Ladder, 12\\" Rung, 24\\" W x 4\\" D x 144\\" L600mm wide ladder type cable tray, 3m straight piece
167GI Coupler plates with 3 mm thick, 4 holes on both the sides of size M10 hole & M8 hardware (along with necessary fixing hardware – stainless steel nut, bolt, lock-nut) for 150/300/450/600 W ladder type cable trays mentioned above. (Note : 1 no. set = 4 nos. coupler plates each)
1684P-12-30HB1230 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 30 degree horizontal bend (Bending radius 300mm)
1694P-12-30VO1230 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 30 degree vertical outside bend (Bending radius 300mm)
1704P-12-45HB1245 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 300mm)
1714P-12-45HB2445 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 600mm)
1724P-12-45VI1245 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 300mm)
1734P-12-45VI2445 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 600mm)
1744P-12-45VO1245 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 300mm)
1754P-12-45VO2445 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 600mm)
1764P-12-90HB1290 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 300mm)
1774P-12-90HB2490 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 600mm)
1784P-12-90HB3690 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 900mm)
1794P-12-90VI1290 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 300mm)
1804P-12-90VI2490 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 600mm)
1814P-12-90VI3690 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 900mm)
1824P-12-90VO1290 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 300mm)
1834P-12-90VO2490 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 600mm)
1844P-12-90VO3690 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 900mm)
1854P-12-HT12Horizontal Tee, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated Horizontal Tee (Bending radius 300mm)
1864P-24-12HT24Horizontal Reducing Tee, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated Reducing Horizontal Tee (Bending radius 600mm)
1874P-24-30HB1230 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree horizontal bend (Bending radius 300mm)
1884P-24-30HB2430 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree horizontal bend (Bending radius 600mm)
1894P-24-30VI1230 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical inside bend (Bending radius 300mm)
1904P-24-30VI2430 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical inside bend (Bending radius 600mm)
1914P-24-30VO1230 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical outside bend (Bending radius 300mm)
1924P-24-30VO2430 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 30 degree vertical outside bend (Bending radius 600mm)
1934P-24-45HB1245 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 300mm)
1944P-24-45HB2445 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 600mm)
1954P-24-45HB3645 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree horizontal bend (Bending radius 900mm)
1964P-24-45VI1245 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 300mm)
1974P-24-45VI2445 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 600mm)
1984P-24-45VI3645 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical inside bend (Bending radius 900mm)
1994P-24-45VO1245 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 300mm)
2004P-24-45VO2445 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 600mm)
2014P-24-45VO3645 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 45 degree vertical outside bend (Bending radius 900mm)
2024P-24-60HB1260 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 60 degree horizontal bend (Bending radius 300mm)
2034P-24-90HB1290 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 300mm)
2044P-24-90HB2490 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 600mm)
2054P-24-90HB3690 Deg Horizontal Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree horizontal bend (Bending radius 900mm)
2064P-24-90VI1290 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 300mm)
2074P-24-90VI2490 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 600mm)
2084P-24-90VI3690 Deg Vertical Inside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical inside bend (Bending radius 900mm)
2094P-24-90VO1290 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 300mm)
2104P-24-90VO2490 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 600mm)
2114P-24-90VO3690 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 36\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated 90 degree vertical outside bend (Bending radius 900mm)
2124P-24-HT12Horizontal Tee, Series 2, PG Steel, Ladder, 12\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated horizontal TEE (Bending radius 300mm)
2134P-24-HT24Horizontal Tee, Series 2, PG Steel, Ladder, 24\\" Rad, 24\\" W x 4\\" D600mm wide, 100mm depth Pre-fabricated horizontal TEE (Bending radius 600mm)
2144P-24-RR12Right Reducer, Series 2, PG Steel, Ladder, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated right Reducer
2154P-24-SR12Straight Reducer, Series 2, PG Steel, Ladder, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated Straight Reducer
2164P-24-LR12Left Reducer, Series 2, PG Steel, Ladder, 24\\"x12\\" W x 4\\" D600mm wide to 300mm wide, 100mm depth Pre-fabricated Left Reducer
2174P-12-60VO1260 Deg Vertical Outside Bend, Series 2, PG Steel, Ladder, 12\\" Rad, 12\\" W x 4\\" D300mm wide, 100mm depth Pre-fabricated 60 degree vertical outside bend (Bending radius 300mm)
218Horizontal Adjustable Connector type coupler plate (90mm x 220mm x 3mm thk)
219Clamps for fixing 45 degree Horizontal & Vertical Cable Tray cover along with necessary fixing hardware – stainless steel (SS304) nut, bolt, lock-nut for ladder type cable trays mentioned above.
220Clamps for 300 mm wide tray
221Clamps for 600 mm wide tray
222Cable Tray Covers (GI) (Length 3 mtr per piece)
223150 mm wide
224300 mm wide
225450 mm wide
226600 mm wide
227Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
228300 mm wide
229600 mm wide
230Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
231300 mm wide
232600 mm wide
233Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
234300 mm wide
235600 mm wide
236Pre Fabricated Tray Cover for Horizontal 900 Bends (Bending Radius-1200 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
237300 mm wide
238600 mm wide
239Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
240300 mm wide
241600 mm wide
242Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
243300 mm wide
244600 mm wide
245Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
246300 mm wide
247600 mm wide
248Pre Fabricated Tray Cover for Inside Vertical 900 Bends (Bending Radius-1200 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
249300 mm wide
250600 mm wide
251Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
252300 mm wide
253600 mm wide
254Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
255300 mm wide
256600 mm wide
257Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
258300 mm wide
259600 mm wide
260Pre Fabricated Tray Cover for Outside Vertical 900 Bends (Bending Radius-1200 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
261300 mm wide
262600 mm wide
263Pre Fabricated Tray Cover for Horizontal 450 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
264300 mm wide
265600 mm wide
266Pre Fabricated Tray Cover for Horizontal 450 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
267300 mm wide
268600 mm wide
269Pre Fabricated Tray Cover for Horizontal 450 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
270300 mm wide
271600 mm wide
272Pre Fabricated Tray Cover for inside Vertical 450 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
273300 mm wide
274600 mm wide
275Pre Fabricated Tray Cover for inside Vertical 450 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
276300 mm wide
277600 mm wide
278Pre Fabricated Tray Cover for inside Vertical 450 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
279300 mm wide
280600 mm wide
281Pre Fabricated Tray Cover for Outside Vertical 450 Bends (Bending Radius-300 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
282300 mm wide
283600 mm wide
284Pre Fabricated Tray Cover for Outside Vertical 450 Bends (Bending Radius-600 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
285300 mm wide
286600 mm wide
287Pre Fabricated Tray Cover for Outside Vertical 450 Bends (Bending Radius-900 mm) with 2 nos. fixing clamps along with necessary SS304 hardware
288300 mm wide
289600 mm wide
290Pre Fabricated Tray Cover for Cable Tray Reducer with 2 nos. fixing clamps along with necessary SS304 hardware
291600 to 300 mm Reducer, Right Hand Side
292601 to 300 mm Reducer, Left Hand Side
293300 to 150 mm Reducer, Right Hand Side
294300 to 150 mm Reducer, Left Hand Side
295Pre Fabricated Tray Cover for Equal Tee’s (Bending Radius-300 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
296300 mm wide
297600 mm wide
298Pre Fabricated Tray Cover for Equal Tee’s (Bending Radius-600 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
299300 mm wide
300600 mm wide
301Pre Fabricated Tray Cover for Equal Tee’s (Bending Radius-900 mm) with 3 nos. fixing clamps along with necessary S3304 hardware
302300 mm wide
303600 mm wide
304Pre Fabricated Tray Cover for Unequal Tee’s (Bending Radius-300 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
305300 x 300 x 150 mm wide
306600 x 600 x 150 mm wide
307600 x 600 x 300 mm wide
308Pre Fabricated Tray Cover for Unequal Tee’s (Bending Radius-600 mm) with 3 nos. fixing clamps along with necessary SS304 hardware
309300 x 300 x 150 mm wide
310600 x 600 x 150 mm wide
311600 x 600 x 300 mm wide
312Z Clamps for Holding Horizontal Cable Tray, Material - HDGI, thickness - 2 mm with necessary fixing hardware with (with M12 hole & M10 hardware SS304 nut, bolt, lock-nut)
313Separators for Cable Ladders (GI)
314300 mm / 600 mm wide Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57793485
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 06-10-2026
Authority
Authority Name Numaligarh Refinery Limited
Work Description Tender for Supply Of Electrical Cables Trays For Pfcc And Gds Unit At Nrep = Limited
Basic Detail
Tender No TK-1ZZZA-MP-RFQ-0266
Bidding Type Tender
Location
City Golaghat
State Assam
Key Dates
Publish Date 30 Sep 2026
Submission Date 06 Oct 2026
Open Date 07 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
ac82fd32-a09d-40d4-9dfd-90498e2add29.html
Bid_Documents_EL_Trays_GDS_PFCC.xls
BOQ_975531.xls
Part_I.rar
Part_II_tech_Docs.rar
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Oct 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

ac82fd32-a09d-40d4-9dfd-90498e2add29.html

xls

Bid_Documents_EL_Trays_GDS_PFCC.xls

xls

BOQ_975531.xls

rar

Part_I.rar

rar

Part_II_tech_Docs.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders