Bids Are invited for Tender For 19 Nos Dc And Ac Ev Charging Stations At Different Locations Of Sbi In Uttar Pradesh

Sharing tender

Bids Are invited for Tender For 19 Nos Dc And Ac Ev Charging Stations At Different Locations Of Sbi In Uttar Pradesh Sitc Of 60Kw Dc Ev Charging Station For 4 Wheeler , Sitc Of 30Kw Dc Ev Charging Stationfor 4 Wheeler , Sitc Of 3.3 Kw Ac Ev Charging Station For 2 Wheeler , Sitc Of 3 Kw Dc Ev Charging Station For 2 Wheeler , Main Electrical Lt Panel With 200A Incomer , Main Electrical Lt Panel With 125A Incomer , Main Electrical Lt Panel With 100A Incomer , Supply And Laying Of 1.1 Kv Grade 3.5Cx70 Sq. Mm Lt Cable , Supply And Laying Of 1.1 Kv Grade 3.5Cx 35 Sq. Mm Lt Cable , Supply And Laying Of 1.1 Kv Grade 4Cx16 Sq. Mm Lt Cable , Lt Cable End Termination 3.5 C X 70 Sq. Mm , Lt Cable End Termination 3.5 C X 35 Sq. Mm , Lt Cable End Termination 4C X 16 Sq. Mm , Sitc Of 4Cx25 Sq. Mm Copper Wire , Sitc Of 4Cx16 Sq. Mm Copper Wire , Sitc Of 4Cx6 Sq. Mm Copper Wire , Gi Plate Chemical Earthing , Gi Strip 25X3 Sq. Mm , Sitc Of 1Cx10 Sq. Mm Copper Wire , Providing And Fixing Of Civil Foundation Work , Painting Work , Proving And Fixing Of Name Plate , Proving And Fixing Of Inaugration Plate , Proving And Fixing Name L Shape Ms Agle Iron Stand - Sitc Of 60Kw Dc Ev Charging Station For 4 Wheeler - Supply, Installation, Testing And Commissioning Of 60Kw Dc Fast Ev Charging Station For Electric 4 Wheelers, 415V, 3 Phase, 50Hz Input, Minimum 60Kw Dc Output With 2 Nos Ccs2 Charging Guns, Simultaneous Charging With Automatic Dynamic Power Sharing, Ocpp 1.6J Or Higher, Integrated Energy Meter, Remote Monitoring, Ip 65 Outdoor Enclosure, Complete Electrical & Electronics Protections, Emergency Stop, Communication Facility, Applicable Bis/Is/Iec Compliance, Arai Approved, Including All Accessories, Mounting, Cabling/Termination, Earthing, Testing, Commissioning And 3 Years Comprehensive Warranty, Complete In All Aspects Along With 5 Meter Standard Charging Cable.(Rate Shall Include The Provision Of 3 Years Warranty On Charging Station)Make - Delta / Exicom / Bolt Earth / Servotech / Abb / Tata Power , Sitc Of 30Kw Dc Ev Charging Stationfor 4 Wheeler - Supply, Installation, Testing And Commissioning Of 30Kw Dc Fast Ev Charging Station For Electric 4 Wheelers, 415V, 3 Phase, 50Hz Input, Minimum 30Kw Dc Output With 1 No Ccs2 Charging Guns Suitable For Ev Vehicle, Ocpp 1.6J Or Higher, Integrated Energy Meter, Remote Monitoring, Ip 65 Outdoor Enclosure, Complete Electrical & Electronics Protections, Emergency Stop, Communication Facility, Applicable Bis/Is/Iec Compliance, Arai Approved, Including All Accessories, Mounting, Cabling / Termination, Earthing, Testing, Commissioning And 3 Years Comprehensive Warranty, Complete In All Aspects Along With 5 Meter Standard Charging Cable.(Rate Shall Include The Provision Of 3 Years Warranty On Charging Station)Make - Delta / Exicom / Bolt Earth / Servotech / Abb / Tata Power , Sitc Of 3.3 Kw Ac Ev Charging Station For 2 Wheeler - Supply, Installation, Testing And Commissioning Of 3Kw Dc Ev Charging Station For Electric 2 Wheelers, 230 V, 1 Phase, 50Hz Input, Minimum 3Kw Dc Output With Type-6/7 Or Applicablecompliant Dc Sharging Connector Compatible Withthe Intended 2-Wheeler Charging Ecosystem, Ocpp 1.6J Or Higher, Integrated Energy Meter, Remote Monitoring, Ip 65 Outdoor Enclosure, Complete Electrical & Electronics Protections, Emergency Stop, Communication Facility, Applicable Bis/Is/Iec Compliance Arai Approved, Including All Accessories, Mounting, Cabling / Termination, Earthing, Testing, Commissioning And 3 Years Comprehensive Warranty, Complete In All Aspects Along With 5 Meter Standard Charging Cable.(Rate Shall Include The Provision Of 3 Years Warranty On Charging Station)Make - Delta / Exicom / Bolt Earth / Servotech / Abb / Tata Power , Sitc Of 3 Kw Dc Ev Charging Station For 2 Wheeler - Supply, Installation, Testing And Commissioning Of 3.3Kw Ac Ev Charging Station For Electric 2 Wheelers, 230 V, 1 Phase, 50Hz Input, Minimum 3.3 Kw Ac Output With Suitable Ac Sharging Connector/Socket Compatible Withthe Intended 2-Wheeler Charging Ecosystem, Ocpp 1.6J Or Higher, Integrated Energy Meter, Remote Monitoring, Ip 65 Outdoor Enclosure, Complete Electrical & Electronics Protections, Emergency Stop, Communication Facility, Applicable Bis/Is/Iec Compliance, Arai Approved, Including All Accessories, Mounting, Cabling / Termination, Earthing, Testing, Commissioning And 3 Years Comprehensive Warranty, Complete In All Aspects Along With 5 Meter Standard Charging Cable.(Rate Shall Include The Provision Of 3 Years Warranty On Charging Station)Make - Delta / Exicom / Bolt Earth / Servotech / Abb / Tata Power , Main Electrical Lt Panel With 200A Incomer - Supply, Installation, Testing And Commissioning Of Main Electrical Lt Panel Having 200A Mccb Incomer As Per Boq. Refer Technical Specification For Details. , Main Electrical Lt Panel With 125A Incomer - Supply, Installation, Testing And Commissioning Of Main Electrical Lt Panel Having 125A Mccb Incomer As Per Boq. Refer Technical Specification For Details. , Main Electrical Lt Panel With 100A Incomer - Supply, Installation, Testing And Commissioning Of Main Electrical Lt Panel Having 100A Mccb Incomer As Per Boq. Refer Technical Specification For Details. , Supply And Laying Of 1.1 Kv Grade 3.5Cx70 Sq. Mm Lt Cable - Supply Of 1.1Kv Grade Aluminium Conductor 3.5C 70 Sq. Mm Xlpe Insulated And Frls Pvc Sheathed Armoured Cable Conforming To Relevant Is. Cable Shall Be Purchased Only After Approval Of Cable Schedule By Engineer In Charge. Refer Technical Specification For Details. , Supply And Laying Of 1.1 Kv Grade 3.5Cx 35 Sq. Mm Lt Cable - Supply Of 1.1Kv Grade Aluminium Conductor 3.5C 35 Sq. Mm Xlpe Insulated And Frls Pvc Sheathed Armoured Cable Conforming To Relevant Is. Cable Shall Be Purchased Only After Approval Of Cable Schedule By Engineer In Charge. Refer Technical Specification For Details. , Supply And Laying Of 1.1 Kv Grade 4Cx16 Sq. Mm Lt Cable - Supply Of 1.1Kv Grade Aluminium Conductor 4C 16 Sq. Mm Xlpe Insulated And Frls Pvc Sheathed Armoured Cable Conforming To Relevant Is. Cable Shall Be Purchased Only After Approval Of Cable Schedule By Engineer In Charge. Refer Technical Specification For Details. , Lt Cable End Termination 3.5 C X 70 Sq. Mm - Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 3.5C 70 Sq. Mm Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. Refer Technical Specification For Details. , Lt Cable End Termination 3.5 C X 35 Sq. Mm - Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 3.5C 35 Sq. Mm Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. Refer Technical Specification For Details. , Lt Cable End Termination 4C X 16 Sq. Mm - Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4C 16 Sq. Mm Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. Refer Technical Specification For Details. , Sitc Of 4Cx25 Sq. Mm Copper Wire - Supply, Installation, Testing And Commissioning (Sitc) Of 4Cx 25 Sq.Mm., 1100 V Grade, Frls, Multi Strand Copper Conductor Pvc Insulated Wire In Medium Duty Rigid Or Flexible Pvc Conduit As Required Preferably Concealed In Floor/ Wall Including Chase Cutting And Making Good Of Damages/ Sur. Refer Technical Specification For Details. , Sitc Of 4Cx16 Sq. Mm Copper Wire - Supply, Installation, Testing And Commissioning (Sitc) Of 4Cx 16 Sq.Mm., 1100 V Grade, Frls, Multi Strand Copper Conductor Pvc Insulated Wire In Medium Duty Rigid Or Flexible Pvc Conduit As Required Preferably Concealed In Floor/ Wall Including Chase Cutting And Making Good Of Damages/ Sur. Refer Technical Specification For Details. , Sitc Of 4Cx6 Sq. Mm Copper Wire - Supply, Installation, Testing And Commissioning (Sitc) Of 4Cx 6 Sq.Mm., 1100 V Grade, Frls, Multi Strand Copper Conductor Pvc Insulated Wire In Medium Duty Rigid Or Flexible Pvc Conduit As Required Preferably Concealed In Floor/ Wall Including Chase Cutting And Making Good Of Damages/ Sur. Refer Technical Specification For Details. , Gi Plate Chemical Earthing - Supply And Burying Of Safe Earthing Electrode T-19 (Hot Dip Galvanised), Length 3000 Mm, Outer Pipe 50 Mm, Inner Pipe 25, Terminal Dia 12 Mm, Outer Gi Pipe Of 16 Swg And Inner Gi Pipe Of 12 Swg With Hot Dip Galvanization Up To 100 Micron Filled With Crystalline Conductive Mixture (Ccm) Having Anti-Corrosive & Conductive Property With 50 Kgs Activated Soil (Bfc) Capable Of Reducing The Soil Resistivity With Ci Box With Hinged Cover And Masonry Housing. Refer Technical Specification For Details. , Gi Strip 25X3 Sq. Mm - Providing And Fixing 25 Mm X 3 Mm G.I. Strip On Surface Or In Recess Or Underground As Required For Connections Etc. As Required. Refer Technical Specification For Details. , Sitc Of 1Cx10 Sq. Mm Copper Wire - Supply, Installation, Testing And Commissioning (Sitc) Of 1Cx 10 Sq.Mm., 1100 V Grade, Frls, Multi Strand Copper Conductor Pvc Insulated Wire In Medium Duty Rigid Or Flexible Pvc Conduit As Required Preferably Concealed In Floor/ Wall Including Chase Cutting And Making Good Of Damages/ Sur. Refer Technical Specification For Details. , Providing And Fixing Of Civil Foundation Work - Providing And Fixing Of Civil Foundation Work With Brick And Cc Including Concrete Top With Plaster. Refer Technical Specification For Details. , Painting Work - Painting With Cleaning, Putty And 2 Coats Of Exterior Type Paint As Required. Refer Technical Specification For Details. , Proving And Fixing Of Name Plate - Providing And Fixing Of Name Plate With Led Lighting On Double Acrylic Sheet (Size 1500Mm). Refer Technical Specification For Details. , Proving And Fixing Of Inaugration Plate - Providing And Fixing Of Inaugration Plate On Acrylic Sheet (Size 900Mm-W X 750Mm-H ) Letters Typing With Acrylic Golden Color Or As Advised. Refer Technical Specification For Details. , Proving And Fixing Name L Shape Ms Agle Iron Stand - Providing And Fixing Of L Shape 32Mmx32mm X2mm Angle Iron Stand For Inaugration Plate With Primer And Two Coat Painting. Height Of Bottom Of Plate Shall Be 900 Mm From Floor Level And Stand Will Be Grouted 300 Mm In Ground. Refer Technical Specification For Details.