Tender For Integtated Development Of Hirakud Reservoir & Its Surroundings- Dam Museum- Interiors & Fit-Outs.
Tender Value
19.99 Crore
Estimated cost
Bid Submission
21 Oct 2026
14 days left
EMD
20 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Integtated Development Of Hirakud Reservoir & Its Surroundings- Dam Museum- Interiors & Fit-Outs.
BOQ
| Sl. No. | Item Description |
| 1 | Provision, fixing and application of 12.5 mm thick tapered edge glass reinforced gypsum board ceiling on appropriate GI framework as per design. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. Actual surface area to be measured for payment.Item Code- CI01 : CEILING GYPSUMCatagory- CEILING |
| 2 | Content production for all exhibits comprising of 2D Animation including script, audio and video.Item Code- CONTENT : 2D ANIMATIONCatagory- CONTENT |
| 3 | Content production for all exhibits comprising of 3D Animation including script, audio and video.Item Code-CONTENT : 3D ANIMATIONCatagory- CONTENT |
| 4 | Content Development for augmented reality setupItem Code- CONTENT : ARCatagory- CONTENT |
| 5 | Content production for all exhibits comprising of development and text for UI.Item Code- CONTENT : UI/UXCatagory- CONTENT |
| 6 | Content production for all exhibits comprising of video composition including script, audio and video.Item Code- CONTENT : VIDEO COMPOSITIONCatagory-CONTENT |
| 7 | Content Development for virtual reality setup (3 environment)Item Code- CONTENT : VRCatagory- CONTENT |
| 8 | Content Development for all static print graphicsItem Code- CONTENT STATICCatagory- CONTENT |
| 9 | Providing and laying of putty, 2 or more coats of Acrylic Emulsion Paint of approved quality & shade over 2 coats of primer on the internal partition/wall/ceilings masonry concrete surfaces. Colour shade as per the approved design. Item to include all material, labour and carriage in all leads, scaffolding and lifts, scafolding complete.Item Code- F01 : INTERIOR EMULSION PAINTCatagory- FINISHES |
| 10 | Provision and applying textured paint of approved make, shade, texture and design over wall/ceiling/panels. The surface will be finished with one coat of primer applied over white cement based putty of average thickness 2mm of approved brand and manufacturer and plastered (if requried) before putty and primer to prepare a smooth and even surface. The texture paint will be finished with two coats of paint of approved make and shade as specified by the Engineer-in-charge. The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item. Item Code- F02 : TEXTURE PAINTCatagory- FINISHES |
| 11 | Design, provision and execution of hand painted works (including artworks and artistic motifs) with paint of approved make, shade, texture and design over wall/ceiling/panels. The surface will be finished with one coat of primer applied over white cement based putty of average thickness 2mm of approved brand and manufacturer and plastered (if requried) before putty and primer to prepare a smooth and even surface. The artistic paint will be finished with multiple coats of paint of approved make and shade as specified by the Engineer-in-charge. Awater based polyurethane clear coating having smooth finish is to be used as a protective top coat. The rate includes all material, labor, tools, scaffolding, plants, equipments, accessories, safety harness, etc. and nothing should be paid extra on this item.Item Code- F03 : ARTISTIC PAINTCatagory- FINISHES |
| 12 | Provision and applying of high quality vinyl prints on existing surfaces (flat/curved). The vinyl graphics will be printed with high quality UV printing technology on self adhesive media of approved make (3M or equivalent) with approved matte lamination/ overlaminate to protect againts scratches and general wear and tear. The surface to be treated with putty and paint as required to achieve a smooth finish as per the directions of Engineer-in-charge. The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item.Item Code- F04 : VINYLCatagory- FINISHES |
| 13 | Provision and applying of high quality wallpaper of approved make and design on existing surfaces (flat/curved). The surface to be treated with putty and paint as required to achieve a smooth finish as per directions of Engineer-in-charge. The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item.Item Code- F05 : WALLPAPERCatagory- FINISHES |
| 14 | Design, provision and execution of artistic work made out of 4mm-6mm thick fiberwork fixed over existing surface/framework to replicate design elements consisting of low and high relief elements and finished as per design with a protective top coat to achieve the desired effect as per directions of the Engineer-in-charge. The rate includes all material, inbuilt framework to give pre defined shape, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item.Item Code- F06 : FIBERWORKCatagory- FINISHES |
| 15 | Providing and painting PU paint of approved brand and shade over fit-outs, wall paneling, MS structure or any other surface with two or more coats to achieve a given even shade, including one coat of primer, preparation of surface using automotive putty, thinner etc. surface duly emery papered to give a perfectly smooth and evenly prepared surface before painting etc. complete in all respect as per directions of Engineer-in-charge. The rate includes all materials, Labour, tools, plants and equipment. Nothing shall be paid extra on this items.Item Code- F07 : PU PAINTCatagory- FINISHES |
| 16 | Provision and fixing of a hard compressed fiber glass core panel wrapped with fabric. The panel should feature square edges and edges chemically resin hardened, with a minimum density of 60 Kg/m³ and NRC (Noise Reduction Coefficient) of 0.75. The rate includes all materials, Labour, tools, plants and equipment. Nothing shall be paid extra on this items.Item Code- F08 : ACOUSTIC panelsCatagory- FINISHES |
| 17 | Providing and fixing Aluminium sheet channel letter signs for Building names with logo or design if any, backlit with LEDs and face of the signs treated with colour acrylic / epoxy resin faced as per design complete with fixing in place with heavy duty anchor system. Supply of illuminated channel letters. The sign shall comprise of 3D Built up IAF logo of appropriate size (height nearly 1200mm but may vary as per design) and channel letters in required fonts of Hindi and English in Font Height as specified depicting the name fixed as per approved drawings supported on a rigid supporting system in steel/Wall Fixing. The Sign and the logo shall have hollow lit effect by LED's with the help of 3mm polycarbonate. The logo and the channel letters shall be fabricated to required shape and size & to be made out of Aluminium sheet of thickness 3mm/2mm & back light by LED Modules and appripriate drivers and 3M coloured cast 3630 vinyl all complete Item will be installed by using 3M VHB-2.3mm thk 25mm wide, drilling necessary holes of required dia. at appropriate places in the back plate for fixing purpose and in peripheral plate for drainage purpose. Providing necessary supporting system comprising of mild steel angle members of required size and lengths including LED module.Item Code- 3D CHANNEL LETTERS , Catagory- FITOUT |
| 18 | Provision and fixing of a sleek metallic kiosk to house a tablet. The kiosk should include provisions for mounting a tablet along with conduits. Size should be sufficient to conceal a tablet. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Item Code- AR KIOSK TABCatagory- FITOUT |
| 19 | Supply and installation of artistic resin flooring system comprising surface preparation including grinding, cleaning, and priming of the substrate; application of self-leveling epoxy or polyurethane resin (minimum 3 mm thickness) in selected RAL shade; including edge coving, expansion joint treatment, and surface sealing with UV-resistant topcoat. The system shall provide high durability and low maintenance. Finish shall be smooth or anti-skid as specified, with matte or gloss appearance. All materials must be non-toxic, VOC-compliant, and suitable for indoor public use. Work includes complete protection, curing, and site cleaning after installation.Item Code- ARTISTIC RESIN FLOORCatagory- FITOUT |
| 20 | Provision and fixing of revolving chair with soft cushioning as per design.Item Code- CHAIR REVOLVINGCatagory- FITOUT |
| 21 | Provision and installation of a sculptural artefact. Primary structure in Grade 304/316 Stainless Steel, with mirror or satin finish as per approved design. All joints to be precision welded, ground, and polished. The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge. Overall Size (dia x height) = 1500 mm x 2400 mmItem Code- COURTYARD ARTISTIC INSTALLATIONCatagory- FITOUT |
| 22 | Provision and fixing of a lightweight miniature part model of Dam. The dam model will be made out of various materials including thermocol, HDHMR panelling, flexiply, etc and finished with various materials of approved make and shade to replicate the existing dam. Item to include a lightweight base and appropriate framework ensuring its structural stability as per satisfaction of Engineer-in-charge. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 750mm x 450mm x 600mmItem Code- DAM MODEL BLOCKSCatagory- FITOUT |
| 23 | Provision and fixing of a miniature model of Dam. The dam model will be made out of various materials including 4-6mm thick fiberwork, HDHMR panelling, flexiply, etc and finished with various materials of approved make and shade to replicate the existing dam. Item to include a solid HDHMR base and required MS framework to fix the model in place ensuring its structural stability as per satisfaction of Engineer-in-charge. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 14500mm x 2400mm x 4000mmItem Code- DAM REPLICAICatagory- FITOUT |
| 24 | Provision and fixing of a miniature model of Dam. The dam model will be made out of various materials including 4-6mm thick fiberwork, HDHMR panelling, flexiply, etc and finished with various materials of approved make and shade to replicate the existing dam. Item to include a solid HDHMR base and required MS framework to fix the model in place ensuring its structural stability as per satisfaction of Engineer-in-charge. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 6500mm x 1250mm x 4000mm Item Code- DAM REPLICAIICatagory- FITOUT |
| 25 | Design, provision and execution of volumetric artistic set as per design made out of various materials like panels, batons, paper, fabric, etc. and finished with various materials like paint, vinyl graphics, wallpaper, etc. as per design and directions of the Engineer-in-charge. The artistic set is to be finished and furnished with suitable theme based props (included in rate) and mannequins (excluded in rate). The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item.Floor area shall be measured for payment.Item Code- DIORAMACatagory- FITOUT |
| 26 | Provision and fixing of a display wall (Depth upto 500 mm) as per design. The display unit shall be made of 12-18mm thick HDHMR panel with appropriate MS framework and finished with PU Paint. The front side of the display wall to be made out of 10mm thick toughened glass and a fabric backdrop for artefact display area. The display wall should include provisions for mounting artifacts and include exhibit lights and conduits as per design and satisfaction of the Engineer-in-charge. Dimensions may vary as per design requirements. The rate includes all materials, labor, tools, plants, equipments, scaffolding, lifts etc. and nothing shall be paid extra on this item.Area to be measured from front (Display side) elevation.Item Code-Catagory- FITOUT |
| 27 | Supply Installation Testing & Commissioning of floor mounted buttons to send response to server when a person stands on it. The button should be durable to withstand the load of a person and should be operational for users of different age group. Item to include integration of the button with server and fixing into existing platform as per design intent.Item Code- DISPLAY KIOSKSCatagory- FITOUT |
| 28 | Supply, installation, testing and commissioning of artistic installation made of cnc cut SS304 sheets of thickness 3 mm of approved colour and texture as per design. The item will include necessary internal lighting and support structure to fix it to the ground or hanged through steel tension wires from the walls. item to include all necessary hardwares, accessories and materials required to achieve the desired effect and nothing should be paid extra on this item. Area to be measured in terms of front surface area of water fountain.Overall Visible Size of Cube (edge) : 1500mmOverall Visible Size of Installation (width x depth x height) : 1500mm x 1500mm x 4000mmItem Code-Catagory- FITOUT |
| 29 | Providing, fixing and installation of glass platform including laminated glass and framework as per design. The glass shall be 35 mm thick clear, Laminated glass, having characterized by light transmission of 79.4%, external reflection 5.8%, solar factor 0.61, shading coefficient 0.71, U-Value 4.6 W/m²K and weight of the glass shall be 83.2 kg/m². Glass shall be installed in a four-sided support configuration. Capable to hold 500 kg/m² of UDL load. The maximum dimension of glass shall be within size (1.2 X 2 m). The recommended edge cover for glass into frame shall be >= 30mm.Item Code- FOUNTAIN ARTISTIC INSTALLATIONCatagory- FITOUT |
| 30 | Provision and applying of high quality vinyl print cutouts on existing surfaces (flat/curved). The vinyl graphics will be printed with high quality UV printing technology on self adhesive media of approved make (3M or equivalent) with approved matte lamination/ overlaminate to protect againts scratches and general wear and tear. The graphics will be applied over a 8mm thick HDF base cut to match the shape of the graphic. The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, safety harness, etc and nothing should be paid extra on this item.Item Code- GRAPHIC CUTOUTCatagory- FITOUT |
| 31 | Provision, fixing and installation of an interactive full-scale ship style navigation wheel replica. The wheel shall be made of solid teak wood and finished with PU polish. The wheel shall include interactive element to identify and quantify the rotation and send the input to a server. The wheel shall be mounted on a solid wood/metallic pole and a base made out of 12-18mm thick HDHMR panels finished in PU paint ensuring safety and structural stability as per satisfaction of Engineer-in-charge. The rate includes all material, labour, tools, scaffolding, plants, and equipments including embedded hardware and software and other accessories, safety harness, etc and nothing should be paid extra on this item.Overall Size (width x depth x height) : 750mm x 300mm x 1200mmItem Code- INTERACTIVE WHEEL REPLICACatagory- FITOUT |
| 32 | Provision, fixing and installation of a kinetic model of dam. The model will be made out in layers as per design to reveal various structural and mechanical components/layers of a dam. The model will be made out of various materials including HDHMR panels, metal (GI/MS/ACP) sheets, solid wood, 3d printed components, of varying thickness and finished as per design to replicate the existing dam as per satisfaction of the engineer in charge. Item to include all hardware, mechanical components and programming to complete the installation as per design.Overall size (width x depth) : 3600mm x 1200mm, height as per Dam proportions and kinetic mechanism.No of WInches: 10Item Code- KINETIC DAM MODELCatagory- FITOUT |
| 33 | Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with fiberwork to replicate design elements. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 1800mm x 900mm x 850mmItem Code- KIOSK 65Catagory- FITOUT |
| 34 | Provision and fixing of a kiosk as per the design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 900mm x 250mm x 2100mmItem Code- KIOSK 65PCatagory- FITOUT |
| 35 | Provision and fixing of a circular kiosk as per design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance)/flexiply and sides finished with PU Paint. The top of the kiosk will be finished in high gain projection paint of approved make. The kiosk should include provisions for mounting capacitive touch sensors, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (diametre x height) : 1500mm x 850mmItem Code- KIOSK CIRCULAR PR Catagory- FITOUT |
| 36 | Provision and fixing of a kiosk as per design. The kiosk shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance) and finished with PU Paint. The kiosk should include provisions for mounting a TV, pressure sensor, conduits, and housing a server. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 1800mm x 900mm x 850mmItem Code- KIOSK WATER PRESSURECatagory- FITOUT |
| 37 | Provision and fixing of framework for LED videowall panels on floor. The framework to be made out of suitable MS sections for verticals, horizontals, and supports to achieve a rigid and stable framework as per design. The entire MS structure shall be treated with corrosion protection. The item will include walkable sandwich glass panel of 35mm thick (variable as per design) and concealing of edges of the screen with HDHMR panels in paint finish. Area from top shall be measured for payment.Item Code- LED FLOOR STRUCTURE & GLASSCatagory- FITOUT |
| 38 | Provision and fixing of framework for LED videowall panels. The framework to be made out of suitable MS sections for verticals, horizontals, and supports to achieve a rigid and stable framework as per design. The entire MS structure shall be treated with corrosion protection. The MS Framework elevation area shall be measured for payment.Item Code- LED STRUCTURECatagory- FITOUT |
| 39 | Providing and fixing of 12-18mm thick HDHMR panel cladding on straight/curved ms framework out of 50mm x 50mm sections and appropriate gauge at 600mm vertically/horizontally spacing and as where required for proper completion of job fixed to the wall by means of raul plugs/screws . The cost includes labour, materials, wastages, hardware, lead, lifts, cutting to all shapes, fixing at all loations and levels etc. complete as per the instructions of Engineer-in charge.Item Code- PARTITION MS HDHMRCatagory- FITOUT |
| 40 | Provision and fixing of a periscope unit as per design. The unit shall be made of 12-18mm thick HDHMR (High Density High Moisture Resistance)/flexiply and finished with PU Paint. The kiosk should include provisions for mounting a tablet, conduits, etc. Dimensions may vary as per design requirements. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Overall Size (width x depth x height) : 450mm x 450mm x 1250mmItem Code- PERISCOPE UNITCatagory- FITOUT |
| 41 | Provision and fixing of a 150mm high platform constructed with MS framework of appropriate size and thickness. The top and sides of the platform shall be covered with 19mm thick BWP (Boiling Water Proof) plyboard. The platform should feature a smooth and even surface ready to recieve the final finish as per design, with adequate cross-bracing and supports for stability. It should be floor-mounted with appropriate anchoring and include a non-slip surface for safety. All materials and workmanship should comply with relevant industry standards and regulations. Item to include all necessary equipments and hardware required to achieve the desired effect as per satisfaction of the Engineer-in-charge.The platform size will be measured from area on top.Item Code-PLATFORMCatagory- FITOUT |
| 42 | Provision and fixing of projection screen of approved fabric in shape of a vault with eyelets at all sides stretched with cotton twine and fixed to framework with acoustic treatment and covering the eyelets with edge profile in paint/laminate finish. The framework for projection screen to be made out of MS CRC pipe of appropriate size and thickness braced to floor/wall/ceiling with hooks provided at regular intervals. Item to include all necessary equipments and hardware required to achieve the desired effect as per satisfaction of the Engineer-in-charge.Item Code- PROJECTION VAULTCatagory- FITOUT |
| 43 | Providing and fixing of counter table made out of 12-18mm thick HDHMR and finished in 1.5mm thk laminate from all the exposed sides top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.Overall Size (width x depth x height) : 2400mm x 750mm x 1050mmItem Code- RECEPTION TABLECatagory- FITOUT |
| 44 | Provision and fixing of Backlit Silicon Edge Graphics (SEG), designed to be fixed on the wall with necessary support. The graphic panel shall be made of polyester fabric, and metal frame with a fabric material utilizing a UV printing process. Final size to be followed as per drawing.Item Code- SEGCatagory- FITOUT |
| 45 | Supply, installation, testing & commissioning of a sensor to identify the placement of dam model blocks over led wall flooring with all necessary hardware and accessories complete with installation as per the site requirement.Item Code- SENSOR BUILD THE DAMCatagory- FITOUT |
| 46 | Providing and fixing of counter table made out of 12-18mm thick HDHMR and finished in 1.5mm thk laminate from all the exposed sides top to be finished in 6mm thk solid acrylic surface, edges to be finished with edge bending tape of similar shade. The item shall be Inclusive of all hardwares and storage pedestal as specified in design. The agency shall ensure durability, public safety and structural safety of the installed set. Item to include all material, labour and carriage in all leads complete to the satisfaction of engineer in-charge.The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.Overall Size (width x depth x height) : 2400mm x 750mm x 1050mmItem Code- SOUVENIR COUNTER TABLECatagory- FITOUT |
| 47 | Supply, installation, testing & commissioning of a capacitive touch sensor with all necessary hardware and accessories complete with installation as per the site requirement.Item Code- TOUCH SENSORCatagory- FITOUT |
| 48 | Provision and fixing of a sleek cover to conceal a 86\\" tv and its mounts and accessories. The frame to be made out of 12-18mm thick HDHMR and finished in PU paint of approved make and shade. Item to include necessary conduiting and hardware required complete as per the satisfaction of Engineer-in-charge.Item Code- TVCOVER 86Catagory- FITOUT |
| 49 | Provision, fixing and installation of a cylindrical water vessel with required tanks, conduits and accessories. Item to include programming of the pump to simulate liquid flow as per design and reference. Item to include all necessary equipments, pumps, plumbing systems, embedded hardware and other accessories required to achieve the desired effect as per satisfaction of the Engineer-in-charge.Overall Size (dia x height) : 1500mm x 4000mmItem Code- WATER VESSELCatagory- FITOUT |
| 50 | Providing and laying 9-12mm thick Vitrified tiles of approved shade and make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer or as per design and drawings. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Item Code- FLR02 : VITRIFIED TILESCatagory- FLOORING |
| 51 | Providing and laying antiskid Vitrified tiles of approved shade and make, laid over 20 mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand), including providing and grouting the joints with epoxy based antifungal grout and matching pigments, providing and applying silicon sealant between the joints, necessary cutting & preparation, patterns with grooves as per drawing, providing and laying 3-4 mm thick plastic spacer or as per design and drawings. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge.Item Code- FLR03 : ANTISKID TILESCatagory- FLOORING |
| 52 | Provision, fixing and execution of plumbing works in totality for fountain installation including pipes, suitable pumps, containers, nozzles, elbows, tees, sealing, waterproofing etc as per satisfaction of engineer in charge. The rate includes all material, labour, tools, scaffolding, plants, equipments, accessories, etc and nothing should be paid extra on this item.Overall Visible Size of Cube (edge) : 1500mmOverall Visible Size of Installation (width x depth x height) : 1500mm x 1500mm x 4000mmItem Code- PLUMBINGWORK FOUNTAINCatagory- INFRASTRUCTURE |
| 53 | Power DMX Cable PD PD 1M EU & 5Mheight) : 1500mm x 1500mm x 4000mmItem Code- DMX CABLECatagory- LIGHTING |
| 54 | Supply, installation, testing & Commissioning of DMX splitter with DMX signal booster with RDM capability and having 1 no 5-Pin XLR-M DMX input, 1 no 5 pin DMX thru put and eight Isolated and amplified 5 pin XLR-F DMX outputs, each with independent drivers, providing full isolation from theinput and other outputs. In the event that a fault occurs on one DMX output, the others will remain operational. Each output providesLED data indicators, providing full confirmation of proper operation. Afeed through XLR-F connector is provided at the input, allowingthis unit to be placed in the middle of an existing DMX chain, and up to 8 DMX splitters may be used together for further expansion.The 8-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing andDMX control. This unit takes the incoming DMX/RDM signal and splits the signal into 8 separate output channels allowing for expandingthe number of devices controlled from 32 to 8 X 32. The output terminals are electronically isolated from the input & RDM-through portand share a common ground reference. All 8 output ports have an independent output driver to boost the DMX/RDM signal.Fully controlled by DMX , Buffer, magnify, distribute DMX signal effectively , 5pin XLR input and a passive loop through , 8 wayisolated DMX splitter output , Input isolated from outputs over 2000V , Outputs are isolated from each other over 2000V , Power supply:AC 120V 60Hz / AC 230V 50Hz , 1U 19” rack mount , indicative Dimension: 483 x 44.5 x 145 mm/19\\"x5.7\\"x1.8\\"in ,Weight:2.6kg /5.7lbsItem Code- DMX SPLITTERCatagory- LIGHTING |
| 55 | Providing and fixing in position Programmable LED strip profile light in linear, straight or curvilinear manner in the floor as per design intent. The programmable strip, with mininum bend radius 100mm, could light up every dark corner It is to be of RGB programmable colour and controlled. It should be free from any dark spots and provide an even light throughout, or dynamic pattern as per design intent. The specifications are tentative and may vary depending on the design and spatial requirements subject to satisfaction of Engineer-in-Charge. Item Code- FLOOR LED PROFILE LIGHTCatagory- LIGHTING |
| 56 | Supplying, Installation, testing & commissioning of 7 watts or above warm white spot light with 3200K source and standard optics. The item includes mounting accessories, wires and any other fittings as required to complete the work (excluding track).Item Code- LI01 : SPOT LIGHTCatagory- LIGHTING |
| 57 | SITC of RGBW with all acessories Uplight light, 35W,1800 lumens , Efficacy 43 lm/W, 8°/10°/16°/30°/54°/9°x56° beam angle options, Dynamic colours and Variable CTC from 1000K to 12500K.Supply of exterior-rated surface mounted architectural flood light, IP66 rated, Full spectrum RGBWflood light (with CTC control 1000K to 12850K)complete with antiglare snoot. Well homogenised light output with great efficacy of 43 lm/w. The power consumptionis 35 watts,3700 lumens, 8°/10°/16°/30°/54°/9°x56° beam angle Dynamic colours and separate colour temperature channel for CTC control from 1000K- 12500K.Item Code- LI02 : WASHER LIGHTCatagory- LIGHTING |
| 58 | SITC of main controller DMX/RDM Supply of DMX Controller for controlling RGBW Luminaires for powerful show storage and should work as a playback device capable of delivering light. Should be compatible with Artnet/sACN. Should have Rj45 port for Artnet and physical 5 XLR ports too. Should accept SPMTE/LTC or MIDI input for timecode. Each shows to installations with up to 6000 DMX universes. The key features for the controller are as follows – -Housing Steel: Aluminum-Input Voltage: 90-264VAC / 50~60Hz-IEC Classification: Class I- Communication Protocols: TCP/IP, Art- Net-Control Versions: DMX512, DMX512/RDM-Power Consumption: 300W-Number of Universes: Up to 6,000- Operating Temperature Range: 0°C to 40°C'-Humidity Range: 10 to 85% (no condensation)-Protection Rating: IP20- Certifications: CE, CB, CQCItem Code- LIGHT CONTROL HWCatagory- LIGHTING |
| 59 | SITC of Aluminium track for mounting spot lights with supproting SS suspension threads. The item includes necessary electrical work, lights and any labour, tools, machineries, scaffolding/ladder/ropes/any other machine to do the required work is in the scope.Item Code- SPOT LIGHT TRACKCatagory- LIGHTING |
| 60 | Operation and Maintenance of all the hardware, software, fitouts and other related facilities as required for 02 Operations executive. The rate taken is average rate with inflation for O&M period.Item Code- O&MCatagory- OPERATIONS AND MAINTENANCE |
| 61 | Projection Mapping of the projectors in all multiprojector setups. Quantity to be measured per projector in the setup.Item Code- MAPPINGCatagory- SOFTWARE & INT |
| 62 | Supply, Installation, Integration, Testing, Commissioning of projection mapping license. Quantity to be measured per license per server.Item Code- MAPPING LICENSECatagory- SOFTWARE & INT |
| 63 | Design, development, integration, testing and deployment of an augmented reality softwareItem Code- SOFTWARE ARCatagory- SOFTWARE & INT |
| 64 | Design, development, integration, testing and deployment of inteactive software to detect interaction with movement of physical blocks. Quantity to be measured per server.Item Code- SOFTWARE BUILD THE DAMCatagory- SOFTWARE & INT |
| 65 | Design, development, integration, testing and deployment of inteactive software. Quantity to be measured per server.Item Code- SOFTWARE INTERACTIVECatagory- SOFTWARE & INT |
| 66 | Design, development, integration, testing and deployment of inteactive software to detect interaction with capacitive touch sensor. Quantity to be measured per server.Item Code- SOFTWARE ITWCatagory- SOFTWARE & INT |
| 67 | Design, development, integration, testing and deployment of inteactive software to detect interaction with wheel. Quantity to be measured per server.Item Code- SOFTWARE IWKCatagory- SOFTWARE & INT |
| 68 | Development, Installation, Integration, Testing, Commissioning of Museum/Content Management Software (MMS/CMS) - status and health monitoring of all servers. nodal management, control of all shows Content Management System - update of content through MMS for all exhibits Audio Guide in sync with all exhibits - Audio Guides should sync with the video/audio being played in exhibitItem Code- SOFTWARE MMS/CMSCatagory- SOFTWARE & INT |
| 69 | Development, Installation, Integration, Testing, Commissioning oft of Museum Website and Mobile ApplicationItem Code- SOFTWARE MUSEUM WEBSITECatagory- SOFTWARE & INT |
| 70 | Design, development, integration, testing and deployment of inteactive software to detect interaction with pressure sensor. Quantity to be measured per server.Item Code- SOFTWARE PRESSURECatagory- SOFTWARE & INT |
| 71 | Design, development, integration, testing and deployment of inteactive Quiz software to detect interaction with floor buttons. Quantity to be measured per server.Item Code- SOFTWARE QUIZCatagory- SOFTWARE & INT |
| 72 | Development, Installation, Integration, Testing, Commissioning of QR Software to integrate ticket QR scanning integrated with ticketing system.Item Code- SOFTWARE TICKETINGCatagory- SOFTWARE & INT |
| 73 | 360 VIRTUALTOUR of MuseumItem Code- SOFTWARE VIRTUAL MUSEUMCatagory- SOFTWARE & INT |
| 74 | Design, development, integration, testing and deployment of software to play content on LED/TV/SCREENS/HOLOFAN/PROJECTOR. Quantity to be measured per server.Item Code- SOFTWARE VOLCatagory- SOFTWARE & INT |
| 75 | Design, development, integration, testing and deployment of software to play content on VR Pod. Quantity to be measured per server.Item Code- SOFTWARE VRCatagory- SOFTWARE & INT |
| 76 | Supply, Installation, Integration, Testing, Commissioning of 360 degree VR gyroscope including VR set with required fitout, accessories and hardware.Item Code-360 VR GYROSCOPE PODCatagory- TECHNOLOGY |
| 77 | Supplying, Installation, testing & commissioning of Audio system for the museumItem Code-AUDIOCatagory- TECHNOLOGY |
| 78 | Supply, installation, testing & commissioning of Server with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 16GB DDR4 RAM & 16 GB GPU to drive required HDMI output.Item Code- CPU i7 16GBCatagory- TECHNOLOGY |
| 79 | Supply, installation, testing & commissioning of Server with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 16GB DDR4 RAM & 4 GB GPU to drive required HDMI output.Item Code- CPU i7 4GBCatagory- TECHNOLOGY |
| 80 | Supply Installation Testing & Commissioning of CPU with following specification: Processor intel core i7, 12th Generation, 500GB SSD, 16GB DDR4 RAM & 8 GB GPU to drive required HDMI outputItem Code- CPU i7 8GBCatagory- TECHNOLOGY |
| 81 | Supply, installation, testing & commissioning of NUC with following specification: Processor intel core i7, Latest Generation, 500GB SSD, 16GB DDR4 RAM with required operating system to drive required HDMI output.Item Code- CPU NUCCatagory- TECHNOLOGY |
| 82 | Supply Installation (flat/curve), testing & commissioning of Micro LED video wall along with processor with pixel pitch of 1.2mm or less , 500 nits or more brightness. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.Item Code- LED P1.2Catagory- TECHNOLOGY |
| 83 | Supply Installation (flat/curve), testing & commissioning of transparent LED video wall along with processor with pixel pitch of 3.0mm or less , 500 nits or more brightness. Any cables, graphic processor, accessories required for installation and connection of display cable to the server room should be included in the cost.Item Code- LED TRANSPARENTCatagory- TECHNOLOGY |
| 84 | SITC of DLP LASER Phosphor Multimedia Projection system having minimum 9500 Lumens 20000 hours illumination life 1920 x 1200 WUXGANative Resolution 4000000:1 Contrast Ratio inputs: HDBaseTmotorised focus and zoomHDMI DVI-D 3D at 120Hz along with projector mountin bracket etc. complete with suitable short throw lens with vertical and horizontal offset and installation as per the site requirement.Item Code- PR 9600 STCatagory- TECHNOLOGY |
| 85 | Supply, Installation, Testing & Commissioning of a Tablet of DISPLAY 11.0 inches, Resolution 1200 x 1920 pixels, Octa-core, 128GB Memory, 8GB RAM, Battery 7040 mAh, including cover and tempered glassItem Code- TABLETCatagory- TECHNOLOGY |
| 86 | Supplying, Installation, testing & commissioning of 22 inch LED, Resolution 1,920 x 1,080 (FHD), inbuilt or overlay Touch, Brightness - 250 nits or Higher with extension to connect touch & display interface to the server.Item Code- TOUCH TV 22Catagory- TECHNOLOGY |
| 87 | Supplying, Installation, testing & commissioning of 65 inch LED, Resolution 3,840 x 2,160 (4K), inbuilt or overlay Touch, Brightness - 250 nits or Higher with extension to connect touch & display interface to the server.Item Code- TOUCH TV 65Catagory- TECHNOLOGY |
| 88 | Supplying, Installation, testing & commissioning of 86 inch LED, Resolution 3,840 x 2,160 (4K), Built in or overlay touch, Brightness - 250 nits or Higher with extension to connect display interface to the server.Item Code- TOUCH TV 86Catagory- TECHNOLOGY |
| 89 | Supplying, Installation, testing & commissioning of 65 inch LED, Resolution 3,840 x 2,160 (4K), Brightness - 250 nits or Higher with extension to connect display interface to the server.Item Code- TV 65Catagory- TECHNOLOGY |
| 90 | Supplying, Installation, testing & commissioning of 86 inch LED, Resolution 3,840 x 2,160 (4K), Brightness - 250 nits or Higher with extension to connect display interface to the server.Item Code- TV 86Catagory- TECHNOLOGY |
| 91 | The item rates indicated aove work inclusive of cost of all labour, materials,conveyence,taxes and royality(with EMF,DMF and additional charges) of materials,labour cess,here and running charges of all machineries and equipments and other incidental charges so as to complete the item in all respect as per specification and direction of Engineer-In-Charge.Accordingly the bidder has to quote the rates.The rate are exclusive of GST as applicable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender