Tender For Special Repair To Bldg No P-74 Jaman Singh Line( Jcos Md Accn) At Grrc Lansdowne
Tender Value
28.84 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
3 days left
EMD
57688
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-74 Jaman Singh Line( Jcos Md Accn) At Grrc Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- |
| 2 | Area not exc 1.5 sqm each |
| 3 | Area exc 1.5 sqm but not exc 4 sqm each |
| 4 | Taking down shutters of any description, of following size complete all as specified and directed:- |
| 5 | Area exc 1.0 sqm but not exc 2.0 sqm each |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat comprising of virgin PVC polymer having K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length of following size complete all as specified and direction. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable and variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | 65mm x 100mm size |
| 8 | 65mm x 125mm size |
| 9 | M&L 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid flush Skelton door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with and including mild steel butt hinges of required size with necessary full body threaded star headed counter sunk mild steel screws, all as per direction of Engineer- In- Charge. (Note: Mild steel butt hinges and necessary MS screws shall be paid separately) |
| 10 | S&F 30 mm thick moulded WPC wire mesh factory made 1005 decorative type, moulded, panel door shutter prepare to receive Mesh, gauze etc (single or two panel Including wire mesh(confirming as per IS: 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, termite proof, fire retardent and having screw holding capacty complete all as specified and directed. |
| 11 | S&F MS butt hinges, medium weight, cold rolled and fixed of following size complete all as specified and directed:- |
| 12 | 100 mm long |
| 13 | S&F aluminium alloy anodised sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of following size complete all as specified and directed:- |
| 14 | 250mm long |
| 15 | S&F anodised aluminium handles cast type of following size complete all as directed and specified:- |
| 16 | 150 mm long |
| 17 | S&F anodised aluminium barrel tower bolts (ISI marked) of extruded section of following size complete all as directed and specified:- |
| 18 | 150 mm long |
| 19 | S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 20 | S&F including fabricating of anodised aluminium powder coated having minimum thickness of powder coating 50micron frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE complete all as specified and directed.Note :- (i) Builders Hardware shall measured and paid separately under respective item of Schedule 'A' (ii) Only weight of aluminium section shall be measured and paid. No claim what so ever shall be entertained by the Govt on this account. (iii) Thickness of section shall not be more than 2mm.(iv) Window shall be fabricated as per requirement with provision for AC / Cooler openning. |
| 21 | S&F Powder coated aluminium door window ventilator shutters,of any colour (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 22 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator/window/ incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 23 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or wire staples complete all as specified and as directed. |
| 24 | M&L for Aluminium Composite Panels (ACP) any colour of for fixing in shutter/partition with all other necessary accessories for fixing complete all as specified and directed. |
| 25 | S&F in repair for stainless steel, 25 mm dia and 1.2 mm thick curtain rod with and including fixing SS brackets and decorative type brass knobs both side of each rod, complete all as specified and directed(Note Measurement will be taken between end points of Knobs) |
| 26 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 27 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 28 | M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, stone masonary work built in CM (1:6) complete all as specified and as directed. Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary. |
| 29 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 40mm to face stone for Lime or sand stone and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto course complet all as specified and directed. |
| 30 | M&L for raised pointing in cement mortar (1:4) to random rubble masonary uncoursed or brought upto course complete all as specified and directed. |
| 31 | M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish and making the edge water-dropping grooves complete all as specified and directed.Note:1.Height of work to be considered upto 7m from FFL of Ground Floor. 2.Cost of formwork shall be deemed to be included.3.Reinforcement required to be provided will be paid separately under relevant item. |
| 32 | M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :-(a) Provide PCC 1 : 1.5 : 3 type A0 using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement.(b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. on complete sunken surfaces of floor & wall,provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (d) applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane). (Note : Floor Area shall be measured for payment). |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed. |
| 34 | M&L for glazed ceramic coloured tiles(Matte/Gloss Finish) of size not less than 450x300x7 mm thick as on vertical surfaces such as wall etc set and jointed in neat cement slurry and pointed with coloured cement to match over 15 mm thick backing coat on fair faces of brick work in CM 1:4 complete all as specified and as directed. |
| 35 | M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6), area of each tiles shall be of following complete all as specified and directed :- |
| 36 | Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. |
| 37 | M&L for scratch & Joint free Glazed(Porcelain) Vitrified Tiles(GVT)/Polished Glazed Vitrified Tiles(PGVT) 9mm-10mm thick (square or rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm ie size 600 mm x 600 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Note : 1.Size and pattern/texture of GVT(Matt Finish)/PGVT(Glossy Finish) must be decide by Engr in charge 2.Glazed Coating on GVT/PGVT must not be less than 1mm. |
| 38 | All as per Item No. 28 above but in skirting with 10 mm thick back coat in CM 1:4 complete all as specified and as directed. |
| 39 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 40 | M&L for mirror polished machine cut kota stone slab flooring/Step 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror finish polishing over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directedNote:- The size of kota stone slab not less than 550mmx550mm |
| 41 | Description same all as per item No31 above but, as in skirting/ dado (18-20 mm thick Kota stone) over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 42 | M&L for 18-20mm thick granite stone slab (of any type) work (table rubbed and mirror finish polished) with and including necessay notching, chamfering the edges in steps, jambs, pillars, window-cills, cooking platforms and like bedded over and including 20 mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 43 | M&L for 60mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block, M-35 Grade with pre-polished, coloured/ laquar finish any shape and size, as approved confirming to IS 15658-2006 with and including over 50 mm thick stone dust/ sand cushioning complete all as specified and directed. |
| 44 | M&L for 30cm x 30cm x 30mm thick cement concrete tiles, machine pressed, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 45 | Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level including removal of rubbish out side MOD land complete all as specified and directed. |
| 46 | M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed. |
| 47 | M&L for 100 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base of floor complete all as specified and directed. Please Enable Macros to View BoQ information |
| 48 | M&L for 100 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base of floor complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender