Tender For Providing New Bore Well At 11Th Ward Near Rc Street Church And Extension Of Pipeline From 6Th Ward To Oht In Villukuri Town Panchayat.
Tender Value
5.50 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
11 days left
EMD
5500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing New Bore Well At 11Th Ward Near Rc Street Church And Extension Of Pipeline From 6Th Ward To Oht In Villukuri Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Provisions for geophysical survey report |
| 2 | Drilling of bore well of size 6\\" to 8\\" mm dia using hard rock rig including inserting of casing pipe assembly transportation of rig cost of fuel etc. (WD-W0765) |
| 3 | Supply and delivery of following casing pipes |
| 4 | 200 mm 10KSC PVC pipe |
| 5 | 180 mm 10KSC PVC pipe |
| 6 | 180 mm end cap |
| 7 | Supply and delivery of 7.5 HP submersible pump set having a duty condition of 75 lpm discharge against head of 200 metre confirming to IS specification with ISS marking suitable for installation panel board including cost of all materials and all conveyance charges etc complete as per standard specification. (WD-W1643) |
| 8 | Supply and delivery of wall mounting type control panel board of Ammeter, Voltmeter single phase prevents insulator-indicating lambs, STAR DELTA / DOL starter. Suitable for 7.5 HP suitable certificate pump set including all charges. (WD-M1915) |
| 9 | Supply and delivery of following bore well PVC / GI pipes and specials |
| 10 | 50 mm U PVC pipe |
| 11 | 50 mm U PVC adopter |
| 12 | 50 mm GI clamp set |
| 13 | 50 mm GI flange set |
| 14 | 50 mm GI hex nipple |
| 15 | 50 mm GI elbow |
| 16 | 50 mm GI pipe |
| 17 | 50 mm GM non return valve |
| 18 | 50 mm gate valve |
| 19 | Nylon rope |
| 20 | 50 mm GI coupling |
| 21 | 50 mm GI union |
| 22 | Earth work excavation and depositing on bank with initial lead of 2 metre narrow trenches for laying of pipes for water supply works in the hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as directed by the departmental officers. |
| 23 | Supply and delivery of following PVC / GI pipes and specials for water supply works |
| 24 | 90 mm PVC pipe |
| 25 | 90 mm PVC elbow |
| 26 | 90 mm PVC MTA |
| 27 | 80 mm GM gate valve |
| 28 | 80 mm GI elbow |
| 29 | 80 mm GI pipe |
| 30 | 80 mm GI coupling |
| 31 | 80 mm GI flange set |
| 32 | 80 mm GI union |
| 33 | 80 mm GI hex nipple |
| 34 | Lowering of 90 mm PVC pipes to trench, laying to proper grade and alignment including testing the pipeline etc. complete. |
| 35 | Filling the trenches with excavated earth in layers, well rammed watered and well consolidated etc complete complying with standard specification. |
| 36 | Supply and delivery of flat type 4 sq mm PVC sheathed 3 core conductor cables conforming to IS 694 / 1990 with ISI marking suitable for submersible pump sets etc complete. (WD-M1975) |
| 37 | Supply and run of 4 of 6 Sq.mm (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour SD 62. |
| 38 | Supply and fixing of 63 A TPN Metal Clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing SD 151. |
| 39 | Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 128. |
| 40 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work SD 222. |
| 41 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch in flush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point for electronic regulator. (Assume 5 Points Per Coil) (SD-22) |
| 42 | Supply and fixing of 63A fuse unit (500V) Electrical Data Page No.56 (M-1393) |
| 43 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24 |
| 44 | Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. |
| 45 | Brick work in cement mortar 1:5 (one part of cement five part of sand) using country bricks of size 8¾\\"x4¼\\"x2¾\\" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification |
| 46 | Supply and fixing of RCC Precast slab in cement concrete 1:1½:3 mix (one part of cement one and a half part of sand and three part of aggregates) of thick 0.10 m using 20 mm ISS HBG metal including cost of molding charges mixing laying and curing cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification but including cost of reinforcement. |
| 47 | Plastering in cement mortar 1:4 mix (one part of cement and four part of sand) 12 mm thick finishing including cost and conveyance of all materials and labour charges for curing and all other incidental charges etc., complete complying with standard specification. TNDSS No:61 |
| 48 | Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification. |
| 49 | Supply and Delivery Fabrication of Fully panelled Double leaf - Window (without Ventilator) with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. (WD M-1488) |
| 50 | Labour charges for the erection of submersible pump set in bore well / open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. |
| 51 | Supply and run of 4 of 6 Sq.mm (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains. (SD-68) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender