Tender For Special Repair To Nh-305 Sainj-Luhri-Aut Road Km 63/00 To 94/800 In The State Of Himachal Pradesh.
Tender Value
6.74 Crore
Estimated cost
Bid Submission
15 Oct 2026
12 days left
EMD
13.49 Lakhs
Bank guarantee accepted
Document Fee
12000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Nh-305 Sainj-Luhri-Aut Road Km 63/00 To 94/800 In The State Of Himachal Pradesh.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures such as Retaining walls, Breast walls & culverts in all kinds of soils including spade work, pick work, jumper work, blasting work in soft & hard rock and their intermediate classification of soils including chiseling and wedging out of rock with in all depths and lifts including bailing out of water, wherever required as per drawing and technical specification including setting out construction of shoring and bracing removal of stumps and other deleterious matters dressing of sides and bottom, back filling,the excavated earth to the extent required and utilizing the remaining earth locally for road work as per MORT & H specification 301 & 304 latest revision complete in all respects including carriage of material and equipment in all leads and lifts with all modes of transportation. Any loss to the public/private property during course of execution shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases as per directions of Engineer-in -charge. |
| 2 | Excavation for roadway in soil by mechanical means for hill side drain including cutting and transporting/ lean the earth to site of embankment including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections, dimesions and other particulars as per MORT & H specification 301 & 304 latest revision complete in all respects including carriage of material and equipment in all leads and lifts with all modes of transportation. Any loss to the public/private property during course of execution shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases as per directions of Engineer-in -charge. |
| 3 | Providing and laying mechanically mixed & vibrated M-15 (fifteen) Plain cement concrete containing minimum contents of cement @ 5.50 (five point five zero) bags per cubic metre complete in all depth as per drawing and technical specification in Retaining walls, Breast walls, Culverts ,drains ensuring non segregation and curing complete as per MORT & H specifications No. 1500, 1700 & 2100 including carriage of materails and equipments and cost of form work of steel plates in all leads and lifts with all modes of transportation to complete the work to the satisfaction of the Engineer - In -Charge. |
| 4 | Providing and laying mechanically mixed & vibrated M-25 (Twenty FIve) Reinforced cement concrete containing minimum contents of cement @ 8.06 (EIght point zero six) bags per cubic metre complete in all depth as per drawing and technical specification in Culverts etc ensuring non segregation and curing complete as per MORT & H specifications No. 1500, 1700 & 2100 5th revision including carriage of materails and equipments and cost of form work of steel plates in all leads and lifts with all modes of transportation to complete the work to the satisfaction of the Engineer - In -Charge. |
| 5 | Providing and laying mechanically mixed & vibrated M-30 (Thirty) Plain cement concrete containing minimum contents of cement @ 8.10 (EIght point one zero) bags per cubic metre complete in all depth as per drawing and technical specification in Culverts etc. ensuring non segregation and curing complete as per MORT & H specifications No. 1500, 1700 & 2100 5th revision including carriage of materails and equipments and cost of form work of steel plates in all leads and lifts with all modes of transportation to complete the work to the satisfaction of the Engineer - In -Charge. |
| 6 | Supplying, Fitting and Placing FE 500(five hundred) TOR steel Reinforcement in culverts etc as per Technical Specifications complete as per MORT & H specification 1600, 2200 latest revision including carriage of materials and equipments in all leads and lifts with all modes of transportation to the satisfaction of the Engineer - In -Charge. |
| 7 | Providing and laying of boulders apron laid in wire crate made with 4 mm ( Four milimetre ) thick G.I wire confirming to IS 280 and IS 4826 in 100x100 mm( hundred into hundred milimetre) mesh (Weaved diagonal) in all heights and depths including 10% extra for laps and joints laid with stone boulders including carriage of materials by mechnical transport in all leads and lifts confirming with the MORTH Specification ( Latest revision) and as per direction of the Engineer-in-Charge |
| 8 | Providing & fixing weep holes in plain cement concrete Retaining wall, Breast wall, abutments and return walls with 100 mm (one hundred milimetre) dia PVC pipe, extended through the full width of the structure with slope of IV: 20H towards draining face complete as per MORT & H specifications clause 2706 and 2200 (latest revision) including hauling of material in all leads and lifts with all modes of transportation and as per direction of the Engineer-in-Charge. |
| 9 | Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MORT &H specifications to a thickness of not less than 600mm (Six hundred milimetre) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind retaining walls, abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specifications as per MORTH Clause 710.104 of IRC 78 & 2200 5th revision with in all leads and lifts through all mode of transportation and as per the entire satisfication and direction of Engineer -in-Charge. |
| 10 | Providing and erecting a \\"Thrie\\" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 811 including all leads and lifts with all modes of transportation as per the direction of the Engineer-in-Charge. |
| 11 | Providing and fixing of high intensity Engineering grade plastic sheeting euro brand on the front side of the \\"W\\" metal beam crash barrier size 450mm wide in yellow and black colour with arrangement to be fixed on crash barriers for easy visibility at night complete in all respect inclusing carriage of material with in all leads and lifts as per direction of Engineer- in -charge. |
| 12 | Providing and fixing of Reinforced cement concrete M15 grade 5th Kilometre stone of standard design as per IRC:8, fixing in position including painting and printing with in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 13 | Providing and fixing of Reinforced cement concrete M15 grade Ordinary Kilometre stone of standard design as per IRC:8, fixing in position including painting and printing with in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 14 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign (Chavron Board) as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing & complete in all respect inclusing carriage of material with in all leads and lifts as per direction of Engineer- in -charge. |
| 15 | Direction and Place Identification Signs upto 0.9 sqm Size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing & complete in all respect inclusing carriage of material with in all leads and lifts as per direction of Engineer- in -charge. |
| 16 | Direction and Place Identification Signs with size more than 0.9 sqm size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of High Intensity grade sheeting lause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB ,3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing & complete in all respect inclusing carriage of material with in all leads and lifts as per direction of Engineer- in -charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender