Tender For annual repair & maintenance of To Various Residential And Non Residential Buildings Under Division No Iii Shimla.(Sh-Renovation Of Set No 2 Type-Ii At Old Raj Bhawan Quarters Under Peter Hoff Section)
Tender Value
1.97 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
7 days left
EMD
3950
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Various Residential And Non Residential Buildings Under Division No Iii Shimla.(Sh-Renovation Of Set No 2 Type-Ii At Old Raj Bhawan Quarters Under Peter Hoff Section)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) in all leads and lifts as desired by Engineer in Charge. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) |
| 11 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 Per Square meter |
| 12 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Marble work |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Per Square meter, including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | Providing and laying digital vitrified floor tiles (600 X 600 )in different sizes(thickness to be specifiedby the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid in 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), jointing with greycement slurry @ 3.3 kg/ Per Square meterincluding grouting the joints with white cement and matching pigments etc., complete |
| 15 | 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals at High Court of Himachal Pradesh Under Vidhan Sabha Sub Division including carriage of materials within all leads and lifts. |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Deodar wood/Sal wood |
| 17 | Providing and fixing 40 mm thick deodar wood shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge |
| 18 | Providing and fixing flush door shutters interior grade of approved quality, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters. 40 mm thick including black enamelled M.S. butt hinges. inclding carriage of materials within all leads and lifts. |
| 19 | Providing and fixing 35 mm thick shutters wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :Deodar wood |
| 20 | Providing and fixing ply wood lining 6mm thick with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) |
| 21 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) |
| 22 | Providing and fixing 19mm thick Commercial Board shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) |
| 23 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete |
| 24 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete. 1st class deodar wood. |
| 25 | Providing and fixing magnetic catcher of approved brand in quality in cupboard/wardrobe shutters, including fixing with necessary scres etc. complete Triple strip vertical type |
| 26 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm |
| 27 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 28 | Applying priming coat: With ready mixed pink or Grey primer ofapproved brand and manufacture on woodwork (hard and soft wood) |
| 29 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 Per Square meter over an under coat of primer applied @0.75 ltr/10 Per Square meter of approved brand and manufacture on new wood surface complete as per directions of Engineer in Charge. |
| 30 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | Painting walls with Tractor emulsion of asian/ dulux paint of approved shade in two coats after preparing the surface in all leads and lifts complete as per directions of Engineer in Charge. |
| 33 | Painting walls with Premium Exterior grade emulsion of Asian/Dulux paint of approved brand after preparing the surface free from mortar drops etc in all leads and lifts. |
| 34 | Providing and fixing wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps including making good the wall ceiling and floors. including carriage of materials within all leads and lifts :- a) 15mm nominal bore Med Grade. |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 36 | Providing and fixing wash basin of IS no. 2556 of white shade hindware with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 37 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 |
| 38 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia |
| 40 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts. |
| 41 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.complete including carriage of materials within all leads and lifts 110 X 75 mm. |
| 42 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 43 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc.Type B in all leads and lifts as desired by Engineer in Charge. Complete.110 mm dia |
| 44 | 75mm dia |
| 45 | Providing and fixing PVC degee bend ISI marked including fixing with approved adhesive etc complete in all leads and lifts as desired by Engineer in Charge. 110 mm dia complete. |
| 46 | 75 mm dia |
| 47 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete in all leads and lifts as desired by Engineer in Charge. complete. 110 mm dia |
| 48 | 75 mm dia |
| 49 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete in all leads and lifts as desired by Engineer in Charge. complete. 110mm |
| 50 | Providing and fixing PVC single equal branch plain ISI marked etc complete in all leads and lifts as desired by Engineer in Charge.110mm |
| 51 | Providing and fixing .PVC. connection pipe with brass union including carriage of materials within all leads and lifts :-300/450mm length :-15mm nominal bore. |
| 52 | Providing and fixing CP Brass Angle cock with flange of approved colour and quality Sieko Make In all leads and lifts complete. |
| 53 | Providing and fixing CP Brass Bib cock with flange of approved colour and quality Sieko Make In all leads and lifts complete. |
| 54 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia |
| 55 | Providing and Fixing of Soap dish Heavy Diamond of approved brand including carriage of materials within all leads and lifts. |
| 56 | Providing and fixing C.P. towel rod 600x120mm including carriage of materials within all leads and lifts including carriage of materials within all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender