Tender For Construction Of Food Court In Meenakshi Nagar In Ward No. 12 Under Bemc, Bramhapur, Odisha
Tender Value
83.25 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
14 days left
EMD
83258
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Food Court In Meenakshi Nagar In Ward No. 12 Under Bemc, Bramhapur, Odisha
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work in exavation of foundation all kinds of soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect |
| 2 | Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete. |
| 3 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 4 | C.C (1:3:6) with 25mm to 40mm size CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 5 | R.C.C work of M-25 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC. |
| 6 | Foundation & pedastal |
| 7 | Column, Pedastal to plinth |
| 8 | Plinth Beam |
| 9 | GF Column Beam |
| 10 | GF Slab |
| 11 | GF Chajja |
| 12 | GF Lintel |
| 13 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge. Ground Floor |
| 14 | Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
| 15 | Foundation & pedastal |
| 16 | Ground Floor |
| 17 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ground Floor |
| 18 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 19 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 20 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C.Virtrified Flooring 600x600 |
| 21 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. S/F/F of ceramic floor tiles of premium grade having thickness 7mm to 8mm ( 30cm x 30cm / 40cm x 40cm special plain / printed series ). Simpolo/Motto/Johnson Make |
| 22 | S/F/F of granite up to size 0.10 sqm to 0.4sqm i.e up to 2'1\\" x 2'1\\" (10mm thick) in floors. |
| 23 | Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. S/F/F of ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm ( 30cm x 30cm / 40cm x 40cm special plain / printed series ) |
| 24 | S/F/F of virtified dado tiles of premium grade having thickness 8mm to 10mm ( 60cm x 60cm colour / priented series ) |
| 25 | Finishing wall surface of walls with Acrylic wall putty / Plaster of paris (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. |
| 26 | Priming one coat with any approved primer WALL SURFACE (PLASTERED SURFACE) |
| 27 | Two coats with plastic emulsion paint of approved shade on new work to give an even shed. |
| 28 | Wall painting 1 Coat of Primer with 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
| 29 | Supplying, fitting, fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame , shutters and all fitting and fixture. |
| 30 | Supplying, fitting & fixing of M.S framed Grills, wherever requied. The Cost includes, cutouts, drilling, screws etc. complete |
| 31 | Supplying, fitting, fixing of openable UPVC doors with door frame of approved make with 6 mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 32 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. |
| 33 | Painting two coats over a coat of priming over new Iron work with the cost of primer & paint. |
| 34 | Supplying, fitting and fixing, wrought & putup and hoisting the joist and trusses made out of Tata/Bhusan/Jindal make MS square pipes and purlins of square pipes with base plate including all cost of materials, labour, transportation to work site, welding and taxes etc. complete. |
| 35 | Labour for fixing of Tata/Bhusan/Jindal Make Aluminium semi corrugated colour sheet 0.5 in roof drilling holes in wind ties including fixing ridges and valleys etc complete. |
| 36 | Supplying and fixing rolling shutters of approved make made out of 80 X 1.25mm MS laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shafts with brackets, side guides, and arrangements for inside and outside locking with push and pull operation complete includ-ing cost of providing & fixing necessary 27.5cm long wire springs grade No.2 and MS top cover 1.25mm thick for rolling shutters including cost of one coat of zinc chromate primer and two coats of ENAMEL paint. |
| 37 | Supplying and fixing of Pre cast kerb stone of size 300mm x300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming toIS 5758:1984. |
| 38 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 39 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mmthickness of existing ground prepared with proper level and ramming withtools wooden (Dhurmos) and than rolling the surface with light roller makethe surface smoothen and light waterning with sprinkler and maintenancefor 30 days or more till the grass establish properly, as per direction ofofficer-in-charge. CPWD DSR CH-1 NEW 2.33 LANDSCAPE |
| 40 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).ncluding cost of labour, T&P, all taxes and royalties etc. complete as directed by engineer-in-charge |
| 41 | Supplying, fixing and planting of good lansdcape plants and shrubs |
| 42 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European coupled water closet of Jaquar make having cat no CNS-WHT-755S220SPPZ or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etcall complete as per PH specification and direction of Engineer-in-charge. |
| 43 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware under counter wash hand basin of approved size of Jaquar make having cat no CNS-WHT-705 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PHspecification and direction of Engineer-in-charge. |
| 44 | Supplying and fixing urinal of Jaquar make having cat no URS-WHT-13261H or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. |
| 45 | Supplying and fixing urinal Partitions of Jaquar make having cat no 1810-uc/1110uc (JSE-CHR-810UC450X) or equivalent type of approved make including all fittings like curved Shaped urininal partitions height- 900mm & width 450mm 8mm/10mm thick glass with frosted glass of approved make etc complete as per PH specification and directionof the Engineer-in- charge. |
| 46 | Supplying all materials, labour, T&P and fixingstandard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLP 5053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete asper PH specification and direction of Engineering-in-charge. |
| 47 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia pillar cock of Jaquar Cat. No.-FLP 5011PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 48 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLP 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 49 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 563 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 50 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24\\" of Jaquar Cat. No.- ACN-1111SM or equivalent type of approved make etc complete including cutting the wall and making good the damages,including cost of all materials complete as per PH specificationand direction of Engineering-in- charge. |
| 51 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 52 | Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PHspecification and direction of Engineering-in-charge. |
| 53 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 54 | Supplying all materials, labour, T&P and fixing standard sized CP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 55 | Providing all materials, labour,T&P and fittings and fixing of urinal valve auto closing system with built in control cock Jaquar Cat. No.-PRS 077 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 56 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 57 | Supplying all materials, labour, T&P and fixingstandard sized Wall Mixer of Jaquar Cat. No.-FLP 5273PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 58 | Supplying all materials, labour, T&P and fixing of roundshape CP overhead shower of Jaquar Cat. No.-OHS 1789 with arm SHA 477 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 59 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-ACN 1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages,including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 60 | Providing and fixing Floor drain in polished chrome with hole of Kohler make having cat no K-7275IN-CP for floor/nahani trap etc complete as per PH specification and direction of theengineer in charge |
| 61 | Providing and fixing circular type stainless steel grating with hole for floor /nahani trap etc complete as per PHspecification and direction of the engineer in charge |
| 62 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in- charge. (Concealed) |
| 63 | 15mm Dia |
| 64 | 20mm Dia |
| 65 | 25mm Dia |
| 66 | 32mm Dia |
| 67 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80 confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(NonConcealed) |
| 68 | 40mm Dia |
| 69 | 50mm Dia |
| 70 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 71 | 75mm Dia |
| 72 | 110mm Dia |
| 73 | Supplying all materials, labour, T&P, fitting and fixing ofUPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 74 | 110mm Dia Single Junction with Door |
| 75 | 110mm Dia Double Junction with Door |
| 76 | 110mm Dia Cowl |
| 77 | 110mm Dia Plain Bend |
| 78 | 110mm Dia SWR Door Bend |
| 79 | 125mmx110mm Gully trap |
| 80 | 110mm Dia tee with Door |
| 81 | 110mm Dia single junction without Door |
| 82 | 110mm Dia Socket plug |
| 83 | 110mm Dia pipe clip |
| 84 | 110mm Dia Coupler |
| 85 | 75mm Dia Plain Bend |
| 86 | Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 87 | 25mm Dia |
| 88 | 32mm Dia |
| 89 | 40mm Dia |
| 90 | 50mm Dia |
| 91 | Supplying all materials, labour, T&P and fitting and fixing of UPVC NRV valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to siteetc all complete as per the direction of Engineer-in-charge. |
| 92 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in- charge. |
| 93 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 94 | Supplying all materials,labours,T&P for cutting groovesin pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer in-charge. |
| 95 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 96 | Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth UPVC gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 97 | Terrace Water Proofing: Cleaning all the surface area to remove loose patrical such as mortar dust etc, with wire bruch and air blower complete in all respect like repairing of crack by polymer modified cementitious mortar as per the direction of Engineering In charge. Providing & Applying twocomponent, cementitious acrylic polymer based high performance waterproofing coating AquaArm 2C-P/Equivalent manufactured and supplied by MYK Arment /Equivalent at a coverage of0.5 m2/kg in 2 coats at approx 1.2mm DFT. Coverage may vary depending upon the surface. The waterproofing scope shall include supply of geotextile of 120 GSM. polymermodified cementitious mortar as per the direction of Engineering In charge. |
| 98 | Supply, installation, testing and commissioning of Stainless Steel Grease Trap / Oil & Grease Interceptor of size 350 mm × 200 mm × 200 mm, fabricated from SS material, complete with inlet, outlet, removable baffle arrangement, cover, all necessary fittings and accessories for separation of oil, grease and suspended solids from kitchen wastewater, as directed by the Engineer-in-Charge. |
| 99 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 100 | Supplying all materials, labour, T&P and fitting and fixing of double air valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 101 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge Aqua guard pure Chill 120 PSS UV |
| 102 | Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber includingcentring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing,design and direction of Engineer-in-charge. |
| 103 | Extra for every additional depth of 0.10mtr or part there of inspection chamber as of previous item of size 900x800mm from 450mm to 900mm depth |
| 104 | Supplying all materials, labour, T&P and laying of UPVC SWR pipes & fittings of approved make confirming to IS-13592,in trenches as sewer line including jointing, laying in proper gradient etc all complete as per the PH specification and direction ofthe Engineer-in-charge. |
| 105 | 100mm Dia |
| 106 | 150mm Dia |
| 107 | Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all completeas per direction of Engineer-in-charge. |
| 108 | 250mm Dia |
| 109 | Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification(A1-Type Bedding) |
| 110 | 250mm Dia |
| 111 | Supplying all materials, labour, T&P and providing , fitting & fixing 100mm x100mm x100 mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm sizeh.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge. |
| 112 | Supplying all materials ,labour, T&P and making MS Step Iron in 20mm diameter MS steel bars & fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of theEngineer in charge. |
| 113 | Supplying and fixing 900mm dia SFRC cover without frame for manhole including cost of all materials, T&P, labour etc complete as per direction of Engineer-in-charge. |
| 114 | Supplying all materials,labours,T&P and constructing1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment ofroyalty etc all complete as per approved specification anddirection of Engineer-in-charge. |
| 115 | Earth work excavation in all kinds of soil within initial lead of 50 m. And initial lift of 1.5 m. including rough dressing and leveling the bed. |
| 116 | Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete. |
| 117 | C.C (1:4:8) with 4cm size Hand BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 118 | R.C.C. work of m-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. |
| 119 | Concrete Base |
| 120 | RCC Wall |
| 121 | RCC Slab |
| 122 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 123 | Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
| 124 | 12mm thick cement plaster (1:4) for brick work with cement punning for skirting . |
| 125 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 126 | Drilling of 00mtr to 30mtr |
| 127 | Drilling of 31mtr to 50mtr |
| 128 | Drilling of 51mtr to above |
| 129 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes. 00 mtr to 50 mtrs |
| 130 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe |
| 131 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost ofcement which will be supplied directly by the department) |
| 132 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH Rig |
| 133 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 134 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/CromptonGreaves/Kirloskar make) |
| 135 | 1 H.P. Single phase/ three phase 3 stage head renge of 20 to35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) SUBMESIBLE PUMP |
| 136 | Star Delta Control Panel |
| 137 | 40mm Dia Steel Short piece |
| 138 | Well Cap |
| 139 | 50mm Size CI Bracket |
| 140 | 2.5Sqmm flat cable |
| 141 | 20mm dia rigidupvc pipes |
| 142 | Steel Rope with Cover |
| 143 | Labour Charges for lowering including transportation |
| 144 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as perspecification and direction of the Engineer in charge. 32mm HDPE pipes (Finolex/Supreme make) |
| 145 | Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 146 | 65mm dia |
| 147 | 80mm dia |
| 148 | Supplying all materials, labour, T&P and fitting and fixing of CI/DI gate valve of following Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 149 | 65mm dia |
| 150 | 80mm dia |
| 151 | Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, |
| 152 | Sluice Valve Chamber (0.75x0.75x1.20mtr) |
| 153 | Providing & fixing of following dia CI/DI body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS 780 |
| 154 | 65mm Dia |
| 155 | 80mm dia |
| 156 | Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H.specification and as per the direction of the Engineer-in-charge. |
| 157 | Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 158 | Supplying all materials, labour, T&P and fitting and fixing of CI/DI foot valve of following Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 159 | 65mm dia |
| 160 | 80mm dia |
| 161 | Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated withall anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables (in accordance to specification) with earthing from panel to each motor / equipment. |
| 162 | Supply, installation, testing and commisioning of horizontal centrifugal pump set of approved make having discharge16.5m3 per hour and 35-40mtr head including installation of pump set (5 HP) with suitable base plate and foundation inside the sump, delivery arrangement with suitable GI or MS pipe providing valves fittings etc and connection within 10mtr distance etc complete as per the Direction of Engineer-in-charge. (1W + 1S) |
| 163 | Earth work excavation in all kinds of soil within initial lead of 50 m. And initial lift of 1.5 m. including rough dressing and leveling the bed. |
| 164 | Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete. |
| 165 | C.C (1:4:8) with 4cm size Hand BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 166 | R.C.C. work of m-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. |
| 167 | Concrete Base |
| 168 | RCC Wall |
| 169 | RCC Slab |
| 170 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 171 | Supplying, fitting & fixing of M.S framed Grills, wherever requied. The Cost includes, cutouts, drilling, screws etc. complete |
| 172 | Painting two coats over a coat of priming over new Iron work with the cost of primer & paint. |
| 173 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.NB:All the electrical,Fire fighting,HVAC,ELV drawings, Technical Data Sheets & make will be approved by SE R& B Electrical circle & CE Building ,Odisha ,Bhubaneswar prior to execution of the work. |
| 174 | Group A |
| 175 | Group B |
| 176 | Group C |
| 177 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 178 | S/F of Multipurpose board Supply and fixing of 2 no.sof 3pin 5/6 amp modular socket and 2 nos of S.P. 5/6 amp one way modular switch on Modular G.I. Box with Modular Base and cover. |
| 179 | Supply and fixing of 2 no.s of 3pin 5/6 amp modular socket and 2 nos of S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and 1 nos of S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover. |
| 180 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO) |
| 181 | 2 X 1.5sq.mm +1 X 1.5sqmm |
| 182 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 183 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 184 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 185 | Supply and fixing of different type of fitting with lamp |
| 186 | S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 187 | S/F of 12Watt Circular Surface down light LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 188 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard) |
| 189 | S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj/V-Guard |
| 190 | Exhaust fan 9\\" size |
| 191 | Supply and fixing of Modular fan regulator(Cona/ Anchor/ Usha/Bajaj) |
| 192 | Electronics step type Regulator (Modular type) |
| 193 | Supply and fixing of extra down rod |
| 194 | 20mm dia for 20cm x 5 |
| 195 | Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) |
| 196 | Single pole (SP) |
| 197 | 40 Amp DP MCB |
| 198 | 63Amp DP MCB |
| 199 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) |
| 200 | 4 WAY, SINGLE DOOR |
| 201 | 8 WAY, SINGLE DOOR |
| 202 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) |
| 203 | 6sq.mm 2core |
| 204 | MV cable laying up to 25 sq.mm in ground with out sand and cover |
| 205 | S/F of PVC T/C U.B almn. Wire with No.10/12SWG G.I supporting wire |
| 206 | 4mm2 Almn wire |
| 207 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 208 | Standard earthing as per Govt. spcn. |
| 209 | S/F of No.8 G.I wire as earth continuity |
| 210 | Supply of 6Mtr height decorative M.S Pu painted, bottom part 114mm top 76mm OD, base plate of size (250mmX250X12mm) with 4nos of M20 foundation bolts. (Make- K-Lite, RR Ispat, Havells, Utkars or equipvalent) as per the direction of Engineer-in-charge. |
| 211 | Supply & fixing of 40W LED Post Top Larnten luminari decorative light. (Make - Crompton, Havellls, Bajaj, Philips, Helonix, Panasonic) as per the direction of Engineer-in-charge. |
| 212 | Supply, fitting, fixing of 10Watt LED bollard light including all materials. (Make - Crompton, Havellls, Bajaj, Philips, Helonix, Panasonic) as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender