Tender For Construction Work Of Floor, Bench And Shed Of Cremation Ground Of Brahmin Community In No 01, Village Chitsaun Khairpur, Development Block Shikarpur.
Tender Value
17.11 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
5 days left
EMD
86000
Bank guarantee accepted
Document Fee
1750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bulandshahr → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Floor, Bench And Shed Of Cremation Ground Of Brahmin Community In No 01, Village Chitsaun Khairpur, Development Block Shikarpur.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (rcA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate natural sources D.S.R no. 4.1.10A |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) D.S.R No. 6.1.1 |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Under Floor) as per SI.No. 2.25 (a) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources){D.S.R. No. 5.1.2} |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) D.S.R No.5.2.2 |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). D.S.R No. 5.3 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for. Foundations, footings, bases of columns, etc. for mass concrete D.S.R No. 5.9.1 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for. Columns, Pillars, Piers, Abutments, Posts and Struts. D.S.R No. 5.9.6 |
| 10 | Steel reinforcement for R.C.C. work ready to use “cut and bend” rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level.thermo-Mechanically Treated bars of grade Fe-500D or more.D.S.R No. 5.22B.1 |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : D.S.R. No.6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) ( D.S.R 13.4.1) |
| 13 | Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers or with G.I LIMPET WASHERS FILLED WITH WHITE LEAD, INCLUDING A COAT OF APPROVED STEEL PRIMER AND TWO COATS OF APPROVED PAINT ON OVERLAPPING OF SHEETS COMPLETE ( UP TO ANY PITCH IN HORIZONTAL)/VERTICAL OR CURVED SURFACES) EXCLUDING THE COST OF PURLINS RAFTERS AND TRSSES AND INCLUDING CUTTING TO SIZE AND SHAPE WHEREVER REQUIRED . DSR NO 12.1.2 WITH 0.80 MM THICK WITH ZINC COATING NOT LESS THEN 275 GM/SQM |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes. [DSR 10.16.3 |
| 15 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. DSR 16.91.2 |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (D.S.R No. 13.46.1 |
| 17 | SUPPLY AND FIXING OF R.C.C. / PRECAST BENCH AS PER MARKEET RATE. |
| 18 | Supply & Fixing of Informatory Sign board at site including letter, writing, painting etc all comp at site i/c branding work |
| 19 | DEDUCTION OF COMPETITIVE PRICE EFFICENCY (5%) |
| 20 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender