Tender For repair maintenace To Toilets Of Erectors Hostel, Ukhep, Bariniput (Civil Works) And repair maintenace To Toilets Of Erectors Hostel, Ukhep, Bariniput (Ph Works)
Tender Value
15 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
6 days left
EMD
15010
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenace To Toilets Of Erectors Hostel, Ukhep, Bariniput (Civil Works) And repair maintenace To Toilets Of Erectors Hostel, Ukhep, Bariniput (Ph Works)
BOQ
| Sl. No. | Item Description |
| 1 | PART A: R/M to Toilets of Erectors' Hostel, UKHEP, Bariniput (Civil Works) |
| 2 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50mtr lead. |
| 3 | Dismantling and removing old tiled cladding from walls including raking out the joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50mtr lead. |
| 4 | Dismantling brick or stone masonry in lime or cement mortar under 3mtr. height including stacking the useful materials for reuse and removing the debries within 50mtr lead including all labour,T & P, sundries,lead, lift, delift and labour cess etc complete |
| 5 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debries within 50mtr lead including all labour, T & P, sundries,lead, lift, delift and labour cess etc complete in ground floor & 1st floor. |
| 6 | Dismantling and removing doors & windows and ventilators including removal of frames,hinges, fastenings and stacking the same for reuse & removing the debries within 50m lead including all labour, T&P, sundries & labour cess etc complete in ground floor & 1st floor. |
| 7 | Providing and fixing 30cm x 30cm / 40cm x 40cm special plain / printed series ceramic antiskid floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 in floors, treads or steps and landings on 25 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles, all labour, T & P, sundries, all other materials, conveyance, royalty, lead, lift, delift, labour cess and curing etc complete in ground floor and 1st floor. |
| 8 | Providing and fixing 20cm x 30cm / 20cm x 20cm special plain / printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in dados skirting and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost, conveyance, royalty, all labour, T & P, sundries, lead, lift, delift, labour cess and curing etc complete in ground floor and 1st floor. |
| 9 | Brick work with fly ash brick 23cmx11cm x8cm size having crushing strength not less than 75kg/sqcm with dimensional tolerance ±2% in cement mortar (1:6) in foundation & plinth and superstructure including cost,conveyance, royalties, all labour,T & P, sundries, labour cess and curing etc complete |
| 10 | 16mm thick cement plaster in cement mortar (1:6) including admixure of Dr. Fixit pidi proof (LW+) over brick or stone masonry including cost, conveyance, royalty, lead, lift, delift, all labour, T&P, sundries, labour cess and curing etc complete in ground floor and 1st floor. |
| 11 | Cement concrete (1:2:4) for R.C.C works with 12mm size HGCB chips including cost, conveyance , royalty, all labour, T&P , sundries, lead, lift, delift, labour cess and curing etc complete in ground floor & 1st floor. |
| 12 | Supplying, fitting and placing uncoated HYSD bar TATA Tiscon Fe-500D/ SAIL ISI bar Reinforcement complete as per drawing and technical specification including cost, conveyance , all labour, T&P , sundries, labour cess etc complete |
| 13 | Providing and fixing 20mm thick granite tiles in floors, treads or steps and landing using approved shade , quality, and size of granite slab at all height on 25mm thick bed of cement mortar of mix (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of granite tile, conveyance, royalty, all labour ,T&P, sundries, laoding, unloading, stacking of materials at site ,curing and labour cess etc complete. |
| 14 | Providing & fixing Wood plastic Composite section 4\\" x 2.50\\" x 210\\" work framed and fixed( wrought & putup) in trusses , purlins, frames of doors & windows, ventilators, beams and fixed the same in position with six numbers of 10 mm dia x 140 mm long screwed steel bolt with PVC plug of same length including drilling 10 mm dia hole in door /window chaukaths including all cost of all required materials , labour, T&P , sundries, labour cess and curing etc complete. |
| 15 | Providing, fitting and fixing in position 25 mm thick single leaved WPC door shutter including cost of door shutter, all hard ware fittings like Two numbers of ISI chromium plated handles 125 mm x 175 mm x 32 mm, Two numbrer ISI chromium plated tower bolts 200mm x10 mm, three numbers of butt hinges 100 mm x 70 mm x 2.60 mm, Two numbers of chromium plated sliding door bolt (Aldrop). and all types of required screws etc complete including all labour, T & P, sundries, labour cess etc complete. |
| 16 | Providing M.S grills approximately 35.28 Kg /sqm made out of M.S angle frame of cross section 40mm x 40mm x 5mm, 3 vertical members & 2 horizontal members, 4 nos of fixing clamps of 0.20 mtr long each of same angle section, 12 numbers of 12 sqmm MS bars of 1.50 mtr long each as horizontal bars and 14 numbers of 12 sqmm MS bars as vertical members @ 1.20 mtr long each , priming the MS grill with red oxide primer and painting two coats with any approved enamel paint & fixing the same in position with cement concrete (1:2:4) with 12 mm HGCB chips for 4 nos of clamp grooves etc complete including all cost of materials, labour, T & P, sundries, fabrication charges, fixing charges & labour cess etc complete. |
| 17 | Three track three panels sliding window with two 5mm thick acrylic sheet and one wire mesh panels with Aluminum channel for roller track, wool pile, nylon rollers with SS304 body. Using R2 Series with frame (70mm & above)* (40mmc & above) & both glazed and fly screen sash (25mm & above)*(50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2mtr) |
| 18 | Providing and finishing wall surface with Birla white wall seal water proofing putty of Asian/ Berger/ Shalimar make and finished smooth and even surface to receive painting including cost of paint, scaffolding charges, labour , T & P, sundries, labour cess etc complete in ground floor & 1st floor. |
| 19 | Priming one coat with approved Water Bound Wall cement Primer on Plastered Surface in Ground Floor and First floor |
| 20 | Wall painting two coats with plastic emulsion paint of approved shade of Berger/ Asian/ Shalimar / Nerolac / Dulux or equivalent make on old work to give an even shade at all height including cost of paint, brush, putty,all labour, T&P, scaffolding, sudries, labour cess etc complete in ground floor and first floor. |
| 21 | Providing and fixing factory made uPVC wire mesh windows comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R2 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcemen and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Satinless steel Wire mesh as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds |
| 22 | PART B: R/M to Toilets of Erectors' Hostel, UKHEP, Bariniput (PH Works) |
| 23 | Dismantling European or Anglo Indian type water closet and urinal plates and mending good the damages to the floor including all labour, T & P, sundries and labour cess etc complete in ground floor & first floor |
| 24 | Dismantling of flushing cistern of all types (CI/ PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 mtr lead. |
| 25 | Dismantling of mirrors, towel rails etc. |
| 26 | Providing & fixing 20\\" x 16\\" (500 x 400) mm porcelain wash hand basin with a pair of C.I bracket including cutting walls and making good the damages in C.C (1:2:4) as per specification all complete including cost of all materials ,labour, T & P, sundries, curing and labour cess etc complete in ground floor and 1st floor |
| 27 | Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass / Belgium fixed to wooden plugs with chromium plated brass screws and washers complete including all cost of materials, labour, T&P sundries & labour cess etc complete. |
| 28 | Providing and fixing standard sized Chromium Plated towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws complete as per specifications, including all cost of materials, labour, T&P sundries & labour cess etc complete |
| 29 | Providing and fixing wash down water closet ( European type W.C pan Hind ware make ) with integral 'S' or 'P' trap confirmimg to IS 2556 : Part 8 - 2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar ( 1:1) etc all complete including all cost of materials, labour, T&P, sundries & labour cess etc complete. |
| 30 | Providing and fixing plastic seat & cover Hind ware make for wash down water closet with chromium plated brass hinges and rubber buffers all complete including all cost of materials, labour, T&P, sundries & labour cess etc complete. |
| 31 | Providing & fixing PVC low level flushing cistern of Hind ware make with manually controlled device (handle & lever) with all fittings and fixtures including cost, conveyance all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 32 | Providing & fixing 32 mm dia PVC waste pipe for wash basin or sink with brass check nut including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 33 | Providing & fixing 15 mm dia pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 34 | Providing & fixing 15 mm dia PVC inlet connection pipe and making connection with pillar cocks/ sink faucets and supply mains for wash hand basin/ kitchen sink etc complete including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 35 | Providing & fixing 100 mm dia chromium plated shower with 15 mm or 20 mm inlet including cost of shower arm 15 mm x 225 mm with flange round , conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 36 | Providing and fixing standard sized glass shelf with chromium plated brass bracket and guard rail complete fixed to wooden plugs with chromium plated brass screws including cost of material , labour T&P, sundries, & labour cess etc complete |
| 37 | Providing & fixing 100 mm dia C.P grating in floor including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 38 | Providing & fixing wall mixer 3 in 1 fusion shower tap (Jaguar/ Hindware make) including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 39 | Providing & fixing 15 mm dia C. P long body two way bib cock including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 40 | Providing & fixing pvc health faucet with 1.00 mtr tube with hook including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 41 | Providing & fixing 15 mm dia C. P angular stop cock including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 42 | Providing & fixing C. P soap holder / disc including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 43 | Providing & fixing good quality tooth brush holder including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 44 | Providing and fixing on wall face 110 mm dia unplasticised rigid UPVC pipe (4 Kg / sqcm) ventilation and rain water pipes of Finolex / Ashirbad / Oriplast confirming to IS : 14735 type 'A' including jointing with solvent cement single socketed pipes for ventilation & rain water system including all cost of labour, T & P, sundries, PVC clamp, nail, scaffolding and labour cess etc complete. |
| 45 | Cutting holes through the brick or laterite masonry wall for taking 80 mm /110 mm dia P.V.C ventilation & rain water pipes & mending good the damages including cost, conveyance , royalty, all labour, T&P, sundries, lead, lift, delift, labour cess, scaffolding and curing etc complete in ground floor and 1st floor. |
| 46 | Supplying all materials, jointing of materials including all labour, T & P, sundries,labour cess and fixing of UPVC SWR pipes including all fittings etc complete. |
| 47 | 110 mm x 87. 5° plain bend. |
| 48 | 110 mm x 87. 5° door bend. |
| 49 | 110 mm single Tee with door. |
| 50 | 110 mm dia WC Bend with lip ring . |
| 51 | 110 mm dia UPVC vent cowl. |
| 52 | 75 mm x 87.5° Door bend. |
| 53 | 110 mm PVC Clamp. |
| 54 | 75 mm PVC Clamp. |
| 55 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender